Great read about the Holcomb Generator SCAM Pepe
Here bruh, Troll this . It is fun being a fact checker. Bwahaaa. They call us trolls and bashers
"The Holcolm system is a scam. For one, you can not magnify power, and they don't even define "power" correctly on their site. Power, according to physics, is energy that does real work, such as moving a mass through distance (like driving your car), or producing heat, etc. Power DOES SOMETHING. Holcolm claims they don't boost voltage, they boost amperage! "
And what is exactly what a typical Rotary Generator do?
Doesn't it just "boost Amperage"?
Talking about the simplest Generator out there, a Single Phase Sychronous Gen.
We get an Exciter Field which consumes around 2.0 A max...and from 90V to 170V...depending on AVR and Load.
Then we get at Output around 120V and anywhere around 15- 20 Amps...
So, at 220V we get like 10 Amps...
What is that?
Isn't the Generator "Boosting Amperage"?
"The problem is that while voltage isn't "power", amperage isn't either! Power is the product of voltage multiplied by amperage, which is wattage (in a DC system anyway). 10 volts times 10 amps is 100 watts. If you have 100 watts at twice the amperage, you need half the voltage. Amperage alone doesn't do anything. All a transformer (on an AC system) does is to change around the sides of that equation, so more volts means less amps for a given amount of power and vice versa. Simple. You cannot "magnify" power, since that would mean created energy from nothing which physics says you cannot do."
I assume everyone here knows perfectly well the "Power Equation" based on VXI=Watts
But, Holcomb is not saying they "only" boost Amperage without "any" Voltage...
The Voltage, is automatically generated by Induction at Variation of Flux over Variation of Time in any Electromagnetic Device, including a Transformer...
That is exactly what any typical generator do...maintain around the same Voltage transfered by Induction, while increasing Amperage.
The AVR (Automatic Voltage Regulator) is there to do that job...However, the AVR does not Limit Amperage or Currents. It just plays with Voltage reduction or magnification as required by Loading spec's.
The Single Phase Generator (to put it very simple and so, easier to understand) uses peak around 170Volts at Exciter plus peak 2.0 Amps at Max Load. Just because that is the Mag Field Intensity required to generate the Output Power requirements at Max Loading.
AVR works directly with Exciter Power, NOT with Output Power. So, once AVR lowers Voltage, Amperage would also be reduced automatically, and Field will decrease its intensity (strenght)
Everything in an Induction based Generator works based on Magnetic Field strength variation to control the Induced Output.
Have in mind that also the AVR works directly with the Prime Mover or ICE Engine...to also reduce RPM's/Torque, precisely not to allow Amperage to go skyhigh, whenever Voltage alone is reduced on the Exciting Field. That is decreasing Variation Over Time whenever Rotary speed is decreased.
The other issue they have is that they claim to extract energy from electron spin of an iron atom. You cannot extract energy from a static field. You have to extract energy from something doing real work (like moving a mass, or spinning a shaft). This means if you extact energy from something like "electron spin", you would stop the spinning when you extract the energy. You would CONSUME the energy in the electron, basically, by converting it to electrical power you send down the wire. If the claim is the input power "respins" the electron, then you get out only what you put in, minus those pesky losses you get when converting energy. There is no free lunch. Physics is a real pain sometimes. You CANNOT get out more power than you put in, to do so would be what is sometimes called "over unity" or otherwise a fancy vesion of the impossible perpetual motion machine."
To put it in simple words...What Holcomb is doing, it has been done before by many other Inventors...but they did not succeed...unfortunately.
And that is just to move the Magnetic Field Spectrum, itself, NOT any huge steel mass wrapped with copper coils!!...But just the Massless, Weightless, Frictionless Magnetic Field SPECTRUM.
And that do can be done, I have done it myself, and I can prove it, and btw, I only use True RMS Meters...so, no "mistakes"...also Tektronix Amps Clamps Probes (A622) attached to a Digital Scope.
Sincerely
Ufopolitics
Market Data 
Markets 
AI
