Replies to post #39421 on Global Earth Energy Inc. (fka GLER)

[lukin4winners]

Nice DD sterling as usual thanks!

[Belgianshareholder]

Nice job again, Sterling! My thoughts exactly!

GLER

[sharky]

Good morning, exactly. All to be joined into GLER, and traded publically through GLER. :)

[stervc]

Hawk/GLER & Trump Equipment Company Acquisition…

Before we talk about this first acquisition, that’s Trump Equipment Company (TEC), let’s first set the stage by thoroughly re-reading through what GLER released in the PRs below on August 28, 2013 and Sep 9, 2013 introducing Hawk as their partner and GLER confirming that Hawk was going to acquire ”four” companies below:

Global Earth Energy Inc. Announces Partnership With Hawk Manufacturing, Inc.
http://ih.advfn.com/p.php?pid=nmona&article=58979679

Global Earth Energy, Inc.'s Partner Hawk Manufacturing Finalizing Agreements on Four Businesses in Three States
http://ih.advfn.com/p.php?pid=nmona&article=59127679

I think again I must note that the 4 acquisitions is expected to be 6 acquisitions as per the company just as the $10 million in financing is expect to now be $25 million as per the company, but with the series of posts I’m making, understand this when you see me mention 4 instead of 6 or $10 million instead of $25 million.

Now let’s begin!



Now comes the ”first” of ”four” significant acquisitions to come… Trump Equipment Company (TEC)… as per the GLER PR released on Sep 27, 2013 below:

Global Earth Energy, Inc.'s Partner Hawk Manufacturing Acquires Trump Equipment Company of Texas
http://ih.advfn.com/p.php?pid=nmona&article=59392986

…HAWK completed this TEC transaction as an equity transaction valuing Trump Equipment at $9.5 million. …

… The acquisition of Trump Equipment will add 48 full-time employees to Hawk Manufacturing, and also add more than $15 million in annual revenues and EBITA of more than $2 million to Hawk Manufacturing. …

http://trumpequipment.com/demo/trump/

There were some who were curious about TEC even existing and/or even having any inventory. I am very fortunate to be living right here in San Antonio, TX which is where one of the TEC locations exist. This is when I decided to do only a drive-by because I had my grandson with me and I didn’t want to get out of my vehicle to go inside. Still, I took a few pictures from a distance to capture some of their inventory in their yard:





This pictures are not much as I definitely could have gotten a lot more, but it wasn’t necessary in my opinion because I did confirm that they actually have plenty of inventory from driving around their location. When I drove around to enter into its fenced-in area to turn around, there were plenty of cars and people where it looked like business was definitely happening. The structure of the facility looked like the structure within the TEC website for their three locations below for their San Antonio, TX location:

http://trumpequipment.com/demo/trump/


Below is some more info about TEC:

http://trumpequipment.com/demo/trump/


http://trumpequipment.com/demo/trump/
• Founded in 1993, Family Owned
• More than 1,100 trailers sold
• More than 10,000 service jobs completed
• Providing only American made parts
• Committed to entire Eagle Ford Shale Region

To further confirm the validity of Trump Equipment Company (TEC), below is a listing of some of their inventory, trailers, trucks, parts, & service along with confirmation of a partnership with Wells Fargo:

TEC Inventory:
http://www.commercialtrucktrader.com/find/dealers/Trump-Equipment-Company,-Inc./2982386/Perpage-80/Page-1


TEC Trailers:
http://trumpequipment.com/trailers/




TEC Trucks:
http://trumpequipment.com/demo/trump/used-trucks/




TEC Parts:


TEC Service:



TEC Partner with Wells Fargo:

http://trumpequipment.com/demo/trump/credit-application/


http://trumpequipment.com/wp-content/uploads/2012/04/Wells-Fargo-Equipment-Application.pdf


TEC Videos Courtest of MONEYMADE:
http://investorshub.advfn.com/boards/read_msg.aspx?message_id=92494812



Courtesy of M0NEYMADE, the Trump Equipment Company (TEC) had acquired "Southern Field Maintenance" which is indicated directly on the front of Trump’s home page as indicated below:
http://investorshub.advfn.com/boards/read_msg.aspx?message_id=92479467

http://trumpequipment.com/demo/trump/



http://www.sfmvictoria.com/


To further add to the acquisition growth as stated from the info directly above, "Southern Field Maintenance" acquired ”Victoria” of which is indicated below:


http://www.victoriawelderrepair.com/Home_Page.html

http://www.victoriawelderrepair.com/Pictures.php




http://www.victoriawelderrepair.com/Home_Page.html




I think now it is important to go back to talk a little bit more about the TEC acquisition of "Southern Field Maintenance" below.


http://www.sfmvictoria.com/aboutus.html

…Through our partnership with Onan, Kohler, John Deere, and Northern Lights we have the power generation capabilities to fit all your needs. From standby to marine to continuous duty operations SFM, Inc. has the power you need.

Let’s observe in greater detail these partners of Southern Field Maintenance of which the first partner we will talk a little about is Onan. For inquiring minds, Onan is a product line that specializes in engines and power generators known to some as Cummins Onan of which is a division of Cummins.


http://www.cumminsonan.com/

Cummins Onan is a division of Cummins, Inc. which is a multi-billion dollar company that trades on the NYSE under the symbol of CMI at $133.00+ per share:
http://finance.yahoo.com/q/pr?s=CMI+Profile

http://www.cummins.com/cmi/

Cummins earned $1.66 billion of Net Income on sales of $17.3 billion in 2012.
http://www.cummins.com/cmi/navigationAction.do?nodeId=1000&siteId=1&nodeName=About+Us&menuId=1000



The next partner we’ll talk about is Kohler. According to Forbes, Kohler is a $5 Billion company and is on Forbes Lists as #70 for America's Largest Private Companies:
http://www.forbes.com/companies/kohler/
http://www.forbes.com/largest-private-companies/list/



http://kohlerpower.com/index.htm

Kohler is a huge private company, but I am sure one can easily derive such from further going through their worldwide website:

http://www.kohler.com/corporate/worldwide1.html


http://www.kohler.com/corporate/aboutus/facts.html
• A privately held global manufacturer and service provider, established in 1873

• 52 manufacturing locations worldwide

• Approximately 30,000 associates working on six continents

• More than 50 brands within four major business units: Kitchen & Bath, Global Power,
Interiors and Hospitality & Real Estate



The next partner we’ll talk about is John Deere.


http://www.deere.com/wps/dcom/en_US/regional_home.page

John Deere is the brand name for Deere & Company which is a multi-billion dollar company that trades on the NYSE under the symbol of DE at $82.00+ per share:
http://finance.yahoo.com/q/pr?s=DE+Profile

John Deere too is a multi-billion dollar company as seen from that fact data below:

http://en.wikipedia.org/wiki/John_Deere




The next partner we’ll talk about is Northern Lights.

http://www.northern-lights.com/


http://www.northern-lights.com/about.html

Northern Lights Inc. has become the premiere manufacturer of high quality marine generator sets and propulsion engines while remaining true to its pioneering heritage. …

…Contracts with the State of Alaska for electrification of rural schools and villages, as well as the development of advanced unattended power systems for microwave stations, strengthened the company. Contracts with ALASCOM and EXXON for powering communication sites along the Alaska Pipeline came as a result of the reputation the company had gained for specializing in self-contained, unattended cold weather power systems. …

…By the 2000, Northern Lights had become a recognized worldwide leader in power production. The company continues to grow and innovate. …

http://www.northern-lights.com/literature/brochures.html




So who is this John Ragsdale that’s the CEO of Hawk Manufacturing, Inc. that is behind supporting GLER?
http://investorshub.advfn.com/boards/read_msg.aspx?message_id=91509978


http://www.machiningcharlotte.com/


Maybe John Ragsdale & Hawk Manufacturing, Inc. knows something of a huge magnitude that makes them definitely want to own as a minimum, 214,027,096 shares of GLER at a baseline of .02 per share as a ground floor value. Below is the paragraph from the Form 8-K filed by GLER with the SEC to confirm what I posted above:

http://www.sec.gov/Archives/edgar/data/1121901/000109181813000363/gler082820138k.htm
Item 1.01 Entry into a Material Definitive Agreement.

… The intention of the Exchange Agreement, is that the registrant shall own 20 percent of the outstanding shares of the Hawk common stock and that Hawk shall own 20 percent of the outstanding shares of the registrant’s common stock. If, following the date of the Exchange Agreement, either the registrant or Hawk shall issue additional shares of its common stock for a price per share less than the value per share of such shares of common stock on the date of the Exchange Agreement, then the registrant or Hawk, as the case may be, shall have the right to purchase shares of the common stock of the other at the price per share for which such shares are issued as described in this sentence, so as to maintain the relative stock ownership of the registrant or Hawk, as the case may be, in the registrant or Hawk. For the purposes of the Exchange Agreement, on the date thereof, the price per share of the registrant common stock is deemed to be $0.02, and the price per share of the Hawk common stock is deemed to be $3,200.00. ...

Now, courtesy of Belgianshareholder to eliminate beyond any shadow of a doubt that the real John Ragsdale not only exists, but is the same John Ragsdale that the company has been PR-ing about and that we have been talking about here within this forum:
http://investorshub.advfn.com/boards/read_msg.aspx?message_id=92264793







Now read the PR below to see that GLER/Hawk through Customervision is definitely in very good company:


http://lambertfunds.com/customervision-partners-with-lambert-private-equity-to-launch-automotive-parts-manufacturing-venture/



What’s very important to now understand is the union that has been made between GLER and Hawk Manufacturing, Inc. is the union made now with John M. Ragsdale, the CEO of Hawk Manufacturing. Courtesy of M0NEYMADE, his superb DD has allowed me to be able to elaborate on the importance of this union:
http://investorshub.advfn.com/boards/read_msg.aspx?message_id=91660777

John M. Ragsdale, the CEO of Hawk Manufacturing, Inc., is the CEO of CustomerVision LLC:

http://www.customervision.biz/index.html


The importance about this is that CustomerVision has signed a Special Private Placement Agreement (SPPA) for USD ($5,000,000) of equity line funding with Lambert Private Equity LLC (LAMBERT) as indicated within the Lambert website:


CustomerVision LLC Signs a $5,000,000 Equity Line Agreement with Lambert
http://lambertfunds.com/customervision-partners-with-lambert-private-equity-to-launch-automotive-parts-manufacturing-venture/


http://lambertfunds.com/about/


I think one can see from the PR above between CustomerVision and Lambert that this deal with Lambert is very real and very legit. To further connect the dots, within that CustomerVision PR above, we see that the same John M. Ragsdale that’s the CEO of CustomerVision is also the same CEO of Hawk Manufacturing, Inc. of which where he made direct mention of the $5,000,000.00 to be in support through Hawk Manufacturing, Inc. of which will be in direct support of growing the shareholder value here in GLER pursuing other ventures beneficial to GLER shareholders as per the GLER PR.



Something else key to note is that CustomerVision is a GSA Contract Holder which means that GLER could be in line too for some ”government contracts” based on the connection explained above. See the confirmation below:


http://www.customervision.biz/gsa_award.html


CustomerVision also are partners with the companies below:

http://www.rhoadesmckee.com/


http://www.izenda.com/Site/Izenda-Ad-Hoc-Reporting.aspx


http://sphinxsearch.com/


Here is a Key Collection of DD for GLER and John Ragsdale courtesy of TRAPPER JIM:
http://investorshub.advfn.com/boards/read_msg.aspx?message_id=92395454

GLER WHAT WE KNOW:
http://investorshub.advfn.com/boards/read_msg.aspx?message_id=92394282

Did we know just how big CustomerVision LLC really is:
http://investorshub.advfn.com/boards/read_msg.aspx?message_id=92394376
http://investorshub.advfn.com/boards/read_msg.aspx?message_id=92394460

Some Customers:
http://investorshub.advfn.com/boards/read_msg.aspx?message_id=92394501

CustomerVision LLC PDF:
http://www.customervision.biz/uploads/Dynamic_Intelligent_Scheduling_-_Industrial_Applications.pdf

2 CustomerVision companies:
http://investorshub.advfn.com/boards/read_msg.aspx?message_id=92394685

Perfect sense:
http://investorshub.advfn.com/boards/read_msg.aspx?message_id=92394754

enCapsa:
http://investorshub.advfn.com/boards/read_msg.aspx?message_id=92394777

US Patent Issued to enCapsa:
http://investorshub.advfn.com/boards/read_msg.aspx?message_id=92394842
http://investorshub.advfn.com/boards/read_msg.aspx?message_id=92394871
http://investorshub.advfn.com/boards/read_msg.aspx?message_id=92394942

Encapsa Technology, LLC Locations:
http://investorshub.advfn.com/boards/read_msg.aspx?message_id=92394981

Here is what John M. Ragsdale, CEO, Hawk Manufacturing at 515-230-8076 confirmed directly with me after I personally called and spoke to him which is directly from the PR as he told me to reference the PRs for what is happening...

http://ih.advfn.com/p.php?pid=nmona&article=59127679
GLER believes that HAWK intends to use existing credit facilities for more than $10 million to complete this transaction and similar transactions going forwards, and intends to work with various states and local governments and finance authorities on tax incentives, and direct benefits that could top more than $40 million over the life of the company.

So now, maybe we should ask ourselves… Who is Lambert Funds (Lambert Private Equity)?

http://lambertfunds.com/about/


Anyone who questions the validity and credibility of Lambert Private Equity should research a little deeper to see that Lambert is very legit and all of their deals are very real with some very real companies, especially their one $100 Million deal and their two $75 Million deals as indicated below:
http://lambertfunds.com/category/press/


http://lambertfunds.com/new-fuel-systems-inc-enters-into-usd-100000000-equity-line-funding/


http://lambertfunds.com/featherstone-investment-group-enters-into-usd-75000000-00-equity-line-funding/


http://lambertfunds.com/amvesco-holdings-inc-enters-into-usd-75-million-equity-line-funding/

And now the Lambert deal with Hawk is important as could be seen from the initial links above because of the reason below:

http://ih.advfn.com/p.php?pid=nmona&article=59127679
…GLER believes that HAWK intends to use existing credit facilities for more than $10 million to complete this transaction and similar transactions going forwards, and intends to work with various states and local governments and finance authorities on tax incentives, and direct benefits that could top more than $40 million over the life of the company. …

v/r
Sterling

[Murdoc]

$GLER turning around nicely!!!

[JPS02]

Hawk Manufacturing (HAWK), announces the closing of the transaction to acquire and merger into Global Earth Energy.

1. GLER delivered to Hawk Manufacturing common and preferred shares.

2. Immediately, HAWK will begin the process of integrating its subsidiaries into the new company.

3. Global Earth Energy will move its headquarters to Charleston, SC

4. Change its name to Hawk Manufacturing, Inc.

5. After FINRA's regulatory approvals a new symbol will be issued.

6. HAWK intends to position the Company for an up-listing to another market, possibly NASDAQ, once the Company meets the financial status and market share price for up-listing qualification.

7. The new senior management team will consist of the following individuals:

- Stacey J. Ragsdale, President.
- John M. Ragsdale, CEO
- Carl Partridge, Chief Operating Officer
- Charles Kent Raley, Chief Commercial Officer (CCO)
- Mr. Robert G. Gillian, National Sales Director & V.P. of Marketing.

This team brings over 140 years combined management experiences.

8. "We are excited about this new direction for Hawk Manufacturing and look forward to accelerating our growth plans"

http://ih.advfn.com/p.php?pid=nmona&article=60940332

Go GLER!