Some additional information on the product in my previous post that just received the distribution agreement:
Xcelplus Eliminator 200 TM /stabilized chlorine dioxide has been tested and found to also control the following microorganisms at low dose rates (158ppm and below):
Streptococcus Uberis
Aspergillus
Streptococcus Agalactiae
Fungus Rhodotorula
Masticillin Resistant Staphylococcus Aureus
Pseudomonas Aeruginosa
HIV 1
Escheria Coli
Legionella Pneumophilia
Listeria Monocytogenes
Salmonella Enteriditis Paratyphi B
Salmonella Typhimurium
Campylobacter
Candida Albicans
Hepatitis B
Proteus Mirabilis
Aeruginosa
Rotavirus
FMD
Biofilm
Applications and Dilutions
SARS - 158 ppm
The governments of Singapore, China and Hong Kong tested 27 different sanitizers against the SARS virus. Additionally, Xcelplus supplied Taiwan Xcelplus Eliminator 200 TM for government testing. Out of the 27 products tested, Xcelplus Eliminator 200 TM proved to be number 1 in performance!
Formaldehyde and Glutaraldehyde have been used by many countries fighting SARS. The problem with these products is that they are short lived and they are extremely carcinogenic. Until now, there has not been a safe way to neutralize these hazardous chemicals. Eliminator 200TM contains stabilized Chlorine Dioxide which reacts with the two as follows:
A) Chlorine dioxide, at standard use levels, reacts with Formaldehyde and produces formic acid. Formic acid is a liquid with the same boiling point of water, and unlike Formaldehyde, is not a known carcinogen.
B) Glutaraldehyde reacts with Chlorine dioxide to become glutaric acid, a solid that has been utilized industrially for decades in the manufacture of nylon and is not known to pose any threat to humans.
Bacterial Control in Poultry Breeding Sheds - 200 ppm
Use on floors, ceilings, and walls. Excellent residual efficacy, for approximately 30 days on all hard surfaces. Use to eliminate any bacteria, listeria, salmonella, and prevent Avian Influenza. Remove all birds and clean out old litter and all solids. Pressure wash with water to remove all traces of manure and old food. Let all surfaces dry, then sanitize with Eliminator 200 tm by use of foggers, boom spray, foaming equipment or standard pump sprayer, depending on the size of the building.
Veterinary & Farm Biocide - 100 ppm
Spray surfaces with a fine mist of the product until damp (not dripping) and let dry. For animal areas, spray floors and walls with a fine mist until damp and let dry.
Fishing Industry - 200 ppm for odor control, 3 to 5 ppm for use in pre-chiller tank water, wash down water for general processing, treating coolrooms, hallways , cafeterias, etc.
To control all bacteria and sanitize equipment, boat holds and processing factories, retail shops, refrigerated trucks. Fog, spray, or foam all processing areas, cutting boards, etc. Allow to drain or wipe to remove excess material, no rinse is required. Can be used in coolrooms to control listeria and salmonella at temperatures down to freezing. For sanitizing small outside areas, use a pressure spray. For large areas, use a boom sprayer mounted on a vehicle.
Odor Neutralizer - 50 ppm
Wastewater treatment plants, Hotel/Motel rooms, Nursing homes, Child care facilities, restaurants, taxi & bus's, Mobile homes, Insurance remediation for smoke and sewage damage, Health & fitness centers, etc. Eliminator 200TM MUST come in contact with the source of the odor. Use as a mopping or wiping solution to remove odors from walls, floors, and other hard surfaces. Foggers are the most effective tools for large open areas.
Hospital Biocide - MRSA - 40 ppm, No rinse required
As a sanitizing wash on all hard surfaces, walls, floors, bed-frames, bedding, wheelchairs, shoes and overalls, uniforms, etc. Add to mopping water, wet/dry vac's, steam cleaning of carpets, toilets, urinals, showers, etc. Hard Surface Sanitizer - 10 ppm
Food Disposal Containers, Cutting Boards, Refrigerators, Kitchen and Food prep. areas, walls, floors, ceilings, etc. Use a mopping or wiping solution. Also spray or fog as required. Remove all organic material before application, drain or wipe to remove any excess and allow to dry.
Sterilizer in Surgeries - 150 ppm
Use in surgeries, laboratories, clinics to sterilize equipment. Place equipment requiring sterilization in bath of Eliminator 200TM. Leave for several minutes; remove to a sterile surface and let dry.
Surgery Biocide - 100 ppm
Use in surgical rooms, laboratories, clinics to sanitize work benches and sink, floors and walls. Spray surface with a fine mist until damp (not dripping), or use a mister to produce a fine mist to cover all surfaces and leave to dry.
Applications and Dilutions
Potato Blight & Grape Downy Mildew - 10 ppm
Spray crop with a fine mist of the product.
Fruit & Vegetable Wash - 3 to 5 ppm
Use as a sanitizing wash for cut and uncut fruit and vegetables. To remove bacteria, fungi, and spore formers, to help prevent future infection. Prior to packaging of fruit and vegetables, to control secondary blight on potatoes. Supermarket areas, intermittent spray over displayed produce, export companies wishing to extend produce life.
Potable Water Treatment - 3 to 5 ppm
To sanitize water for human and animal consumption. Add water and wait 10 minutes prior to using. Can be used to treat bore water, river water, rainwater without having to boil to sanitize
Meat & Poultry Processing Industry 150 ppm for mold control, 50 ppm for odor control, 5 to 7 ppm for sanitizing all wash down and general processing areas.
Also treats coolrooms, hallways, cafeterias, etc. Excellent residual efficacy, for approximately 30 days on all hard surfaces. Use to erase any bacteria, listeria, salmonella, etc. All processing areas, remove all organic material, clean down with high pressure water hose, allow to drain and apply Eliminator 200TM. Apply to walls, ceilings and hard to get areas with a fogger or misting device and allow to dry to eliminate all spore formers and rogue bacteria.
Applications and Dilutions
HVAC (Cooling Towers) -10ppm
Empty existing water, clean out dirt, moss, mould, etc. Add fresh water and Eliminator 200 TM at a concentration of 5 ppm. Bacteria cannot build up a resistance to Eliminator 200TM due to the destructive oxidizing process that occurs immediately on contact. Eliminator 200 TM destroys active and spore forms instantly, therefore, it is not necessary to change the biocide on a weekly or monthly cycle as with other types of chemicals. As evaporation occurs, it will then be necessary to determine the time frame between testing, replenishing the water and topping up the Eliminator 200TM.
Brewery & Beverage - 15 to 25 ppm for filters and 3 to 5 ppm for sanitizing brewing kettles, piping systems, swirl tanks and general processing areas
Malthouse - washdown sanitizer for walls and floors, germination areas and steep tanks.
Brewhouse - safe to use on all vessels and piping systems.
Fermentation & Storage - Sanitize tanks, walls and related piping systems.
Filtration - use to shock sanitize activated carbon and sand-gravel filters in the water treatment facility.
Algaecide & Biocide for Cutting Fluids - 30 to 40 ppm
Use on lathes, turret lathes, milling machines, saws, gear cutting machines, automatic lathes, etc. Empty old cutting oil, clean tank and refill with new water soluble oil, mix with water and correct amount of Eliminator 200TM.
--------------------------------------------------------------------------------
[1] COMPILATION OF AVAILABLE DATA ON
BUILDING DECONTAMINATION ALTERNATIVES
Prepared for the EPA by SAIC March 2005, P. 32
[2] COMPILATION OF AVAILABLE DATA ON
BUILDING DECONTAMINATION ALTERNATIVES
Prepared for the EPA by SAIC March 2005, P. 33
AI
Market Data 
Markets 
