Home > Boards > US OTC > Mining/Resources > NORTHGATE MINERALS CORP (NGX:TSX) (TSX:NGX)

Northgate Intersects 4.31 Grams per Tonne Gold Over

Public Reply | Private Reply | Keep | Last ReadPost New MsgReplies (1) | Next 10 | Previous | Next
NYBob Member Profile
Member Level 
Followed By 832
Posts 72,582
Boards Moderated 73
Alias Born 11/22/03
160x600 placeholder
NYBob Member Level  Thursday, 06/09/11 12:36:13 PM
Re: mick post# 516
Post # of 540 
Northgate Intersects 4.31 Grams per Tonne Gold Over 79.6 Metres at Young-Davidson




Hole YD11-234B Intersects One of the Best Intervals Ever Drilled on the Property

View pdf of the press release

TORONTO, June 7, 2011 /CNW/ -

Northgate Minerals Corporation
(TSX: NGX, NYSE Amex: NXG) is pleased to report that
Hole YD11-234B in the YD West zone intersected 4.31 grams per
tonne (g/t) gold over 79.6 metres (m) (estimated true thickness is 55.0 m), including 5.66 g/t over 49.9 m.

The YD West zone is a newly discovered zone, just west of
the currently known reserves at Young-Davidson in
northern Ontario.

Hole YD11-234B is one of the best intervals ever intersected
on the property and follows on the excellent results received
since Discovery
Hole YD10-198 intersected 3.46 g/t over 79.5 m last year.

Hole YD11-234B and YD West Zone Highlights

Hole YD11-234B returned 4.31 g/t gold over 79.6 m.

The hole contains a higher grade section of 5.66 g/t
over 49.9 m at the base (footwall) of the zone.

This new intersection is located about 130 m above and
55 m east of Discovery Hole YD10-198.

Both 234B and 198 are in a new gold zone west of the currently
defined reserves and resources, confirming the fault offset
model relating the YD West zone to the main
Young-Davidson orebody.

Hole YD11-234B and YD10-198 are amongst the highest
grade-thickness intervals intersected to date on the property.

The zone remains open up and down dip and to the west.

Two diamond drills continue to explore in the YD West zone area.

"Exploration at Young-Davidson continues to achieve outstanding
results as recent drilling has returned one of the best holes
ever intersected on the property" Ken Stowe, President and Chief
Executive Officer, remarked. "While last year's Hole 198
was very exciting resulting in the discovery of the YD West
zone, Hole 234B is equally exciting, confirming the fault offset
model along the western edge of the Young-Davidson deposit.
The results of this and other higher-grade follow-up holes
in 2011 underline the tremendous potential to expand the
currently known 2.8 million ounces of reserves1 on the property,
which will ultimately extend the initial 15-year mine-life
or increase the average annual gold output when production
commences in 2012."

Diamond Drill Program
The purpose of the 2011 diamond drill program on the west flank of the Young-Davidson deposit is to explore for new resources west of a major north-south trending diabase dyke that appeared to have truncated the zone. To date, seven holes have intersected the YD West zone and all but one has returned ore-grade intersections. This is a technically challenging area to drill due the depths of the holes and the presence of poor drilling conditions within ultramafic flows located well into the hanging wall. The target is blind due to its depth and thick younger post mineral Proterozoic sedimentary cover. Therefore, geology in the area is being interpreted as drill holes are completed. A number of drill holes have potential intercepts that have been either partially or completely "dyked out" by diabase at zone horizon (i.e. either occupies the entire width of the auriferous zone or a substantial part of the zone (see Figures 1 and 2, Holes 234, 234A and 239)). Currently, a hole is being drilled perpendicular to the exploration holes in the YD West area in order to resolve the location and correlation of the north-south trending diabase dykes. An improved understanding of the diabase dykes in the YD West zone will provide a more accurate resource model to be generated at year-end.

Hole YD11-234B instills confidence that the YD West zone is a highly prospective area evident from thick auriferous intersections in drill Holes 198 and 234B. Other drill holes (198A, 198B and 234) also had very significant gold intercepts (see Table 1 below for complete results). The gold mineralization here is hosted in mildly-hematitic coarse grained syenite with quartz vein stockwork and pyrite mineralization, which is similar to what is observed in the main Young-Davidson deposit.

This new YD West intersection is considered significant as this zone is open up and down dip and to the west. The YD West zone appears to have excellent potential to add significant gold resources to the project. Two diamond drills continue to focus on the YD West target until a sufficient number of intercepts have been obtained to estimate an initial resource by the end of the year. Subsequent drilling will focus on a broader scale to explore the limits of the zone towards the west.

Overview of Young-Davidson Exploration Area
Gold mineralization on the Young-Davidson property is present primarily in an intrusive syenite host rock dipping at approximately 70 degrees to the south. Figure 1 illustrates a longitudinal view of the YD West zone with current reserves illustrated in dark red to the east.

Figure 1 - YD West Zone-Longitudinal Section
www.northgateminerals.com/Theme/Northgate/files/Releases/2011/234B Fig1.JPG

Figure 2 - 9300m Level Plan
See Figure 2: www.northgateminerals.com/Theme/Northgate/files/Releases/2011/234B Fig2.JPG

Figure 2 presents a level plan (horizontal slice) of the property's geology immediately adjacent to the main Young-Davidson reserves. The currently defined reserves terminate against the brown diabase dyke that was the western limit of the reserve. Holes 234B, 234A, 234, 198 and 198A (holes are projected either 75 m up dip or 175 m down dip to the 9300 m level) clearly demonstrate that the younger diabase dyke occupies a fault with an apparent offset of 50 m to 100 m to the north on the western side of the dyke. The actual displacement on the fault could be to the north, downwards or a combination of the two.

Table 1: Assay Results from YD West Zone
Hole ID From (m) To (m) Interval (m) True Thickness (m) Gold Uncut (g/t) Gold Cut 20 g/t
YD11-234B 1064.8 1144.4 79.60 55.0 4.31 4.21
incl 1094.5 1144.4 49.90 34.4 5.66 5.51
incl 1128.0 1142.9 14.90 10.3 10.62 10.10

YD11-234A 1202.6 1221.8 19.20 13.4 1.22 1.22

YD10-234 1216.9 1234.7 17.80 9.5 4.37 4.37
incl 1217.8 1226.1 8.30 4.4 6.82 6.82

YD10-198 1258.0 1337.5 79.5 53.5 3.46 3.46

YD10-198A 1333.7 1355.0 20.20 14.2 6.31 5.42

YD10-198B 1353.5 1364.4 10.9 7.7 5.43 5.43

YD10-226A 1097.3 1134.0 36.7 25.3 0.74 0.74
1115.1 1125.5 10.4 7.2 1.19 1.19

YD11-239 Target zone occupied by diabase dyke ("dyked out")

* * * * * * *

Quality Control - Analyses and Sample Location
Details of quality assurance/quality control procedures for sample analysis and drill hole survey methodology are reported in detail in the Canadian National Instrument 43-101 Standards of Disclosure for Mineral Projects ("NI 43-101") compliant Technical Report filed on SEDAR (www.sedar.com) on August 21, 2009.

Qualified Persons
The program design, implementation, quality assurance/quality control and interpretation of the results are under the control of Northgate's geological staff, which includes a number of individuals who are qualified persons as defined under NI 43-101. Carl Edmunds, PGeo, Northgate's Exploration Manager, is responsible for the overall supervision of the program.

* * * * * * *

Note to Investors:
The terms "Qualified Person", "Mineral Reserve", "Proven Mineral Reserve", "Probable Mineral Reserve", "Mineral Resource", "Measured Mineral Resource", "Indicated Mineral Resource", and "Inferred Mineral Resource" used in this news release are defined in accordance with NI 43-101.

* * * * * * *

Northgate Minerals Corporation is a gold and copper producer with mining operations, development projects and exploration properties in Canada and Australia. Our vision is to be the leading intermediate gold producer by identifying, acquiring, developing and operating profitable, long-life mining properties.

* * * * * * *

Cautionary Note Regarding Forward-Looking Statements and Information:
This Northgate press release contains "forward-looking information", as such term is defined in applicable Canadian securities legislation and "forward-looking statements" ----- in this press release is made as of the date of this press release, and Northgate disclaims any intention or obligation to update or revise such information, except as required by applicable law.

Cautionary Note to US Investors Regarding Mineral Reporting Standards:
Northgate prepares its disclosure in accordance with the requirements of securities laws in effect in Canada, which differ from the requirements of US securities laws. Terms relating to mineral resources in this press release are defined in accordance with National Instrument 43-101-Standards of Disclosure for Mineral Projects under the guidelines set out in the Canadian Institute of Mining, Metallurgy, and Petroleum Standards on Mineral Resources and Mineral Reserves. The Securities and Exchange Commission (the "SEC") permits mining companies, in their filings with the SEC, to disclose only those mineral deposits that a company can economically and legally extract or produce. The Corporation uses certain terms, such as, "measured mineral resources", "indicated mineral resources", "inferred mineral resources" and "probable mineral reserves", that the SEC does not recognize (these terms may be used in this press release and are included in the Corporation's public filings which have been filed with securities commissions or similar authorities in Canada).

1 See press release dated January 25, 2010.



My opinions are my own and and DD I post should be confirmed as unbiased
Public Reply | Private Reply | Keep | Last ReadPost New MsgReplies (1) | Next 10 | Previous | Next
Follow Board Follow Board Keyboard Shortcuts Report TOS Violation
Current Price
Detailed Quote - Discussion Board
Intraday Chart
+/- to Watchlist