Plastic2Oil Inc (PTOI)

[MorningLightMountain]

look what they need:

a. The permittee must maintain all commercially manufactured equipment associated with the facility (i.e. Maxon burners, Bekaert thermal oxidizer, etc.) in accordance with the manufacturer’s operating and maintenance specifications.

PS: remember this sighting??????.....look at the temp.....

http://investorshub.advfn.com/boards/read_msg.aspx?message_id=52702613


Thermal Oxidizer (TO) Operation
The permittee must operate and maintain the TO as follows:
a. A continuous temperature monitoring system must be installed to monitor the operating temperature of the thermal oxidizer (TO) at all times when one or more process units is operating.
b. The operating temperature of the TO must be maintained at or above 1750° F based on a one hour average.
c. If, based upon a one hour average, the operating temperature of the TO drops to more than 50°F below the average operating temperature identified above, the permittee must take expeditious action to return the temperature to the established operating range. The temperature falling below this emission action level is not a violation of this permit condition, however, it is a violation of this permit condition if the permittee fails to expeditiously take action to correct the operating temperature after its fallen below the range. Any period of one or more hours in which the operating temperature of the TO falls more than 50°F below the operating temperature required in Condition 2.1.b. must be documented by the permittee in an upset condition log. Each such event must be evaluated in the log entry in accordance with OAR 340-214-0330