PCT Ltd (PCTL)

[Hate Liars]

7. HUGE OIL MONEY POST for PCTL!

Why is it important to understand that Hydrolyte is simply a re-brand of Excelyte VET (as noted in my #6 post)? Because of what excelyte VET is labeled for! This is why Maverick is spending millions of dollars to buy Hydrolyte this year from PCTL! Note Excelyte VET/Hydrolyte's label for Oil & Gas:



Excelyte® VET - DIRECTIONS FOR USE
It is a violation of Federal law to use this product in a manner inconsistent with its labeling.

OIL AND GAS APPLICATIONS

Frac Water – For typical water treatment of water from non-potable water sources, mix 5 US gallons of Excelyte® VET [this product] with 995 US gallons of frac water to 2.5 ppm FAC or alternatively add enough Excelyte® VET [this product] to obtain a 0.1-0.5 ppm FAC residual after biocide load burden to mitigate and retard the growth of non-public health microorganisms such as anaerobic bacteria, aerobic bacteria and sulfate reducing bacteria to protect fracturing fluids, polymers and gels.

Sour Wells - For typical well treatment, slug dose 168 US gallons at 500 ppm FAC of Excelyte® VET [this product], or alternatively 42-420 gallons depending upon well parameters and conditions, into the well bore on a daily or weekly or monthly basis to maintain control of unwanted odors and non-public health microorganisms, reduce hydrogen sulfide gas and restore well integrity.

Produced Waters - For typical produced water and flow back water treatment, mix 21 US gallons of Excelyte® VET [this product] with 979 US gallons of produced water to 10.5 ppm FAC or alternatively add enough Excelyte® VET [this product] to obtain a 0.5 ppm FAC residual in the produced or flow back water after biocide load burden to retard the growth of non-public health microorganisms.

Heater Treaters, Hydrocarbon Storage Facilities & Gas Storage Wells – For typical storage facility treatment, mix 126 gallons of Excelyte® VET [this product] at 500 ppm FAC or alternatively add enough Excelyte® VET [this product] to obtain a 0.5 ppm FAC residual into the water phase of the mixed hydrocarbon/water system to retard the growth of non-public health microorganisms, control unwanted odors and the formation of hydrogen sulfide, and reduce corrosion of the storage tanks.

Water Flood Injection Water - For typical water flood injection water treatment, mix 21 US gallons of Excelyte® VET [this product] with 979 US gallons of injection water to 10.5 ppm FAC or alternatively add enough Excelyte® VET [this product] to obtain a 0.1-0.5 ppm FAC residual to retard the growth of non-public health microorganisms and control slime in pipelines.

Oil and Gas Transmission Lines - For typical transmission line treatment, slug dose 42-420 US gallons at 500 ppm FAC of Excelyte® VET [this product] into the transmission line on a daily or weekly basis to control unwanted non-public health microorganisms, such as SRB’s, reduce microbiologically influenced corrosion (MIC) and remove the slime and associated sessile bacteria which can degrade pipeline integrity.