Register for free to join our community of investors and share your ideas. You will also get access to streaming quotes, interactive charts, trades, portfolio, live options flow and more tools.
Register for free to join our community of investors and share your ideas. You will also get access to streaming quotes, interactive charts, trades, portfolio, live options flow and more tools.
I don' believe Cetek will fall into the "laggard" category ...
The P/E should end up being MUCH higher than that...
remember -
"Since the company's inception, I have dedicated myself to making sure Cetek gains a solid foundation in as many potentially profitable industries as possible. "
semi conductors(specialized):
http://biz.yahoo.com/ic/ll/832per.html
semi conductor (equipment & materials):
http://biz.yahoo.com/ic/ll/834per.html
semi conductors (integrated circuits):
http://biz.yahoo.com/ic/ll/833per.html
metals and minerals:
http://biz.yahoo.com/ic/ll/133per.html
electronic equipment:
http://biz.yahoo.com/ic/ll/133per.html
communications equipment:
http://biz.yahoo.com/ic/ll/841per.html
printed circuit boards:
http://biz.yahoo.com/ic/ll/835per.html
scientific and technical instruments:
http://biz.yahoo.com/ic/ll/837per.html
wireless communications:
http://biz.yahoo.com/ic/ll/840per.html
aerospace/defense products:
http://biz.yahoo.com/ic/ll/611per.html
a couple of these may be questionable tie-ins (particularly metals and minerals, although I've seen Cetek listed as "materials' a few times) but I think you get the picture.
I believe it will be accomplished through publishing financials (10-25 million in rev), then the halt/split a day or two behind.... then the announcements concerning whatever new multi million dollar contracts have been awarded due to ITAR compliance.
to those of you who are new and use FB , there is a page I set up a week or two ago.... feel free to post anything relevant.
https://www.facebook.com/CTKHShareholders
I believe he was during the silent years, but didn't have the resources yet to make a serious effort... there have been the random 25-50 million share days out of nowhere over the years and on a fairly regular basis.
the mystery bomb dropper regarding the RS ... FH's minion? that would strongly support the theory of his buying shares.
concerning the reinstatement - revival ...
I was always confused by the fact that they had it listed as reinstatement as NVSOS site clearly states a 5 year limit, it always had to be a revival....
are there other mistakes listed on the NVSOS site ?
None of us should. Let FH finishes his buying down here first.
Wow making it, working extra hard this morning
does anyone know what a typically effective date is after an RS filing? I've never been through one before
Anyone else think we'll see an annual today or tomorrow per Cetek historical tendencies?
as of?
OK... really nothing, but I'd emailed the NY SEC office regarding Section 101. Section 13 about the thresholds for beneficial owners to report there %. The only thing I learned is that as un registered company, even if we do we are not responsible for any type of filings.
on the phone w/ the SEC right now... let you know if I learn anything.
The ultimate April Fools ... those who fk'd with FH and the mighty CETEK !!! lol
"according to some" --- I agree, by what I've found the only thing I KNOW they will have to provide is the list of Officers (I'd like to see an addition or two including an asian name on it...)
if you go way back and check when they used to file ... the 8k and 10k annuals were always 4/3 or 4/2 .... he liked Tuesdays for PR's too ---- maybe tomorrow we get an annual? (don't we wish)
There are many of us there been following this for 10 years plus. Six members active on I hub bored that own over 1.5 billion of the OS.
Take 5 minutes to read the DD, there's a reason it's sitting here. And what this company is doing is incredible. They're popping up in research papers all over the place in high end electronics and physics. I'm not talking 1.00 here, but this thing is an easy hundred beggar in the next month or two.
CTKH - Nevada reinstatement update due by end of April.
recent updates CTKH D&D synopsis
Share Structure, Facts, & Scientific Contribution, 30march
CTKH share structure consists of 10B authorized shares, and 5M preferred shares.
S/O on 23 May, 2006 was 5,281,271,144. There is no reason to believe that the O/S has increased since.
The preferred shares are owned by Mr. Hilal, and the votes per share are determined by the board, as required.
Details on share structure at http://www.otcmarkets.com/financialReportViewer?symbol=CTKH&id=8078
Prior to the Reverse Split of 150 to 1, The Hilal family trust owned 18% of those shares. The RS decimated their 18% to basically nothing.
Cetek Technologies has 3 subsidiaries; Cetek Inc, Hybrid-Tek, and WindPower Innovations Inc. Belanger is an affiliate of Cetek Inc.
CTKH has received a recent improved credit rating from Dun&Bradstreet.
CTKH has become ITAR compliant.
Nevada SOS requires an update at the end of the 1 year reinstatement period. CTKH report is due by 4/30/2014.
Cetek Technologies contribution to science;
1) CTKH is working in LTCC technology:
http://mwrf.com/systems/microwave-modules-increasing-integration
2) Planar Electrode Quadrupole Ion Traps,
(Electrical and Computer Engineering.
Chemistry,) Brigham Young University, Provo, UT. The Substrate for the experiment was provided by Hybrid-Tek.
See Page 2.
http://digitalcommons.usu.edu/cgi/viewcontent.cgi?article=1068&context=spacegrant
3) Optical Hybrid, Ohio State U, alumina silicate and macor provided by HTI.
Page 8,
http://www-physics.lbl.gov/~gilg/Nov00PixelBaselineReview/Gan.pdf
4) North Carolina State University; a research thesis required piezoelectric stack actuators which were made from green machined alumina oxide that were provided by Cetek Technologies.
Page 144
http://repository.lib.ncsu.edu/ir/bitstream/1840.16/7507/1/etd.pdf
5) HTI assembled boards for this Drexel University research thesis, and it is on page 67. To quote "All ceramic hybrid circuit boards presented in this chapter were printed and assembled in Hybrid-TEK, Inc., New Jersey."
http://idea.library.drexel.edu/bitstream/1860/3823/1/Zhou_Liming.pdf
6) Hybrid-Tek involved in Performance of a Halo Ion Trap Mass Analyzer
with Exit Slits for Axial Ejection.
The plates were constructed from alumina substrates (50.00-mm diameter, 0.635-mm thickness, 99.6% purity; Hybrid-Tek, Clarksburg,)
http://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&source=web&cd=30&ved=0CNsBEBYwHQ&url=http%3A%2F%2Fwww.researchgate.net%2Fpublication%2F51031871_Performance_of_a_halo_ion_trap_mass_analyzer_with_exit_slits_for_axial_ejection%2Ffile%2F3deec5293ae1eabb13.pdf&ei=sGgqU7qsG4i3rAf63IHQCQ&usg=AFQjCNGKVHXdSzl35Btuhn0bRsmUWCII_A&sig2=wpkA6p4zOMqc8hE7BEFVhQ
7) WindPower Innovations, a CTKH subsidiary. http://www.joesdata.com/executive/Fayiz_K_Hilal_151830520.html
8) A bilingual(Chinese and English)ceramic engineer was on short-term contract at Cetek Technologies, Inc, from 10/2009 to 01/2010, working on large area alumina tape casting. Please take note of the PHD graduate qualifications at:
http://www.postjobfree.com/resume/abm2vl/zeolite-nanomaterials-screen-edm-poughkeepsie-ny
9) 5 years ago, CTKH provided ceramics, engineering, and $100k to the heat exchanger project with WilsonTurboPower. The WTP paper is called "Design and Performance of a High-Temperature Regenerator Having Very High Effectiveness, Low Leakage and Negligible Seal Wear." It is available for download at www.WilsonTurboPower.com/regenerator.
10) Fermi National Accelerator Laboratory, world famous national laboratory specializing in high-energy particle physics, had Hybrid-Tek as an external vendor in 2012.
Hybrid-Tek's involvement is documented in a government document titled "PX Chopper Driver Development at SLAC", and Hybrid-Tek is listed in the middle of the page as one of the the external vendors for the ceramic PCB (printed circuit board).
The link is: http://webcache.googleusercontent.com/search?q=cache:ewMQ91KXYI0J:https://indico.fnal.gov/materialDisplay.py%3FcontribId%3D87%26sessionId%3D19%26materialId%3Dslides%26confId%3D5300+&cd=17&hl=en&ct=clnk&gl=us
11) Finally, Los Alamos Neutron Science Center used a CTKH Macor circuit board that is 1.52mm in size for a project called the LANSCE Harp Upgrade. The link to the description of the project known as Tupsm014 is included below, and Cetek Technologies is listed on page 136 item 5 as the manufacturer of the Macor circuit board.
http://epaper.kek.jp/BIW2010/papers/tupsm014.pdf
CTKH undervalued play of the year?
recent updates CTKH D&D synopsis
Share Structure, Facts, & Scientific Contribution, 30march
CTKH share structure consists of 10B authorized shares, and 5M preferred shares.
S/O on 23 May, 2006 was 5,281,271,144. There is no reason to believe that the O/S has increased since.
The preferred shares are owned by Mr. Hilal, and the votes per share are determined by the board, as required.
Details on share structure at http://www.otcmarkets.com/financialReportViewer?symbol=CTKH&id=8078
Prior to the Reverse Split of 150 to 1, The Hilal family trust owned 18% of those shares. The RS decimated their 18% to basically nothing.
Cetek Technologies has 3 subsidiaries; Cetek Inc, Hybrid-Tek, and WindPower Innovations Inc. Belanger is an affiliate of Cetek Inc.
CTKH has received a recent improved credit rating from Dun&Bradstreet.
CTKH has become ITAR compliant.
Nevada SOS requires an update at the end of the 1 year reinstatement period. CTKH report is due by 4/30/2014.
Cetek Technologies contribution to science;
1) CTKH is working in LTCC technology:
http://mwrf.com/systems/microwave-modules-increasing-integration
2) Planar Electrode Quadrupole Ion Traps,
(Electrical and Computer Engineering.
Chemistry,) Brigham Young University, Provo, UT. The Substrate for the experiment was provided by Hybrid-Tek.
See Page 2.
http://digitalcommons.usu.edu/cgi/viewcontent.cgi?article=1068&context=spacegrant
3) Optical Hybrid, Ohio State U, alumina silicate and macor provided by HTI.
Page 8,
http://www-physics.lbl.gov/~gilg/Nov00PixelBaselineReview/Gan.pdf
4) North Carolina State University; a research thesis required piezoelectric stack actuators which were made from green machined alumina oxide that were provided by Cetek Technologies.
Page 144
http://repository.lib.ncsu.edu/ir/bitstream/1840.16/7507/1/etd.pdf
5) HTI assembled boards for this Drexel University research thesis, and it is on page 67. To quote "All ceramic hybrid circuit boards presented in this chapter were printed and assembled in Hybrid-TEK, Inc., New Jersey."
http://idea.library.drexel.edu/bitstream/1860/3823/1/Zhou_Liming.pdf
6) Hybrid-Tek involved in Performance of a Halo Ion Trap Mass Analyzer
with Exit Slits for Axial Ejection.
The plates were constructed from alumina substrates (50.00-mm diameter, 0.635-mm thickness, 99.6% purity; Hybrid-Tek, Clarksburg,)
http://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&source=web&cd=30&ved=0CNsBEBYwHQ&url=http%3A%2F%2Fwww.researchgate.net%2Fpublication%2F51031871_Performance_of_a_halo_ion_trap_mass_analyzer_with_exit_slits_for_axial_ejection%2Ffile%2F3deec5293ae1eabb13.pdf&ei=sGgqU7qsG4i3rAf63IHQCQ&usg=AFQjCNGKVHXdSzl35Btuhn0bRsmUWCII_A&sig2=wpkA6p4zOMqc8hE7BEFVhQ
7) WindPower Innovations, a CTKH subsidiary. http://www.joesdata.com/executive/Fayiz_K_Hilal_151830520.html
8) A bilingual(Chinese and English)ceramic engineer was on short-term contract at Cetek Technologies, Inc, from 10/2009 to 01/2010, working on large area alumina tape casting. Please take note of the PHD graduate qualifications at:
http://www.postjobfree.com/resume/abm2vl/zeolite-nanomaterials-screen-edm-poughkeepsie-ny
9) 5 years ago, CTKH provided ceramics, engineering, and $100k to the heat exchanger project with WilsonTurboPower. The WTP paper is called "Design and Performance of a High-Temperature Regenerator Having Very High Effectiveness, Low Leakage and Negligible Seal Wear." It is available for download at www.WilsonTurboPower.com/regenerator.
10) Fermi National Accelerator Laboratory, world famous national laboratory specializing in high-energy particle physics, had Hybrid-Tek as an external vendor in 2012.
Hybrid-Tek's involvement is documented in a government document titled "PX Chopper Driver Development at SLAC", and Hybrid-Tek is listed in the middle of the page as one of the the external vendors for the ceramic PCB (printed circuit board).
The link is: http://webcache.googleusercontent.com/search?q=cache:ewMQ91KXYI0J:https://indico.fnal.gov/materialDisplay.py%3FcontribId%3D87%26sessionId%3D19%26materialId%3Dslides%26confId%3D5300+&cd=17&hl=en&ct=clnk&gl=us
11) Finally, Los Alamos Neutron Science Center used a CTKH Macor circuit board that is 1.52mm in size for a project called the LANSCE Harp Upgrade. The link to the description of the project known as Tupsm014 is included below, and Cetek Technologies is listed on page 136 item 5 as the manufacturer of the Macor circuit board.
http://epaper.kek.jp/BIW2010/papers/tupsm014.pdf
CTKH D&D synopsis recently updated
Share Structure, Facts, & Scientific Contribution, 30march
CTKH share structure consists of 10B authorized shares, and 5M preferred shares.
S/O on 23 May, 2006 was 5,281,271,144. There is no reason to believe that the O/S has increased since.
The preferred shares are owned by Mr. Hilal, and the votes per share are determined by the board, as required.
Details on share structure at http://www.otcmarkets.com/financialReportViewer?symbol=CTKH&id=8078
Prior to the Reverse Split of 150 to 1, The Hilal family trust owned 18% of those shares. The RS decimated their 18% to basically nothing.
Cetek Technologies has 3 subsidiaries; Cetek Inc, Hybrid-Tek, and WindPower Innovations Inc. Belanger is an affiliate of Cetek Inc.
CTKH has received a recent improved credit rating from Dun&Bradstreet.
CTKH has become ITAR compliant.
Nevada SOS requires an update at the end of the 1 year reinstatement period. CTKH report is due by 4/30/2014.
Cetek Technologies contribution to science;
1) CTKH is working in LTCC technology:
http://mwrf.com/systems/microwave-modules-increasing-integration
2) Planar Electrode Quadrupole Ion Traps,
(Electrical and Computer Engineering.
Chemistry,) Brigham Young University, Provo, UT. The Substrate for the experiment was provided by Hybrid-Tek.
See Page 2.
http://digitalcommons.usu.edu/cgi/viewcontent.cgi?article=1068&context=spacegrant
3) Optical Hybrid, Ohio State U, alumina silicate and macor provided by HTI.
Page 8,
http://www-physics.lbl.gov/~gilg/Nov00PixelBaselineReview/Gan.pdf
4) North Carolina State University; a research thesis required piezoelectric stack actuators which were made from green machined alumina oxide that were provided by Cetek Technologies.
Page 144
http://repository.lib.ncsu.edu/ir/bitstream/1840.16/7507/1/etd.pdf
5) HTI assembled boards for this Drexel University research thesis, and it is on page 67. To quote "All ceramic hybrid circuit boards presented in this chapter were printed and assembled in Hybrid-TEK, Inc., New Jersey."
http://idea.library.drexel.edu/bitstream/1860/3823/1/Zhou_Liming.pdf
6) Hybrid-Tek involved in Performance of a Halo Ion Trap Mass Analyzer
with Exit Slits for Axial Ejection.
The plates were constructed from alumina substrates (50.00-mm diameter, 0.635-mm thickness, 99.6% purity; Hybrid-Tek, Clarksburg,)
http://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&source=web&cd=30&ved=0CNsBEBYwHQ&url=http%3A%2F%2Fwww.researchgate.net%2Fpublication%2F51031871_Performance_of_a_halo_ion_trap_mass_analyzer_with_exit_slits_for_axial_ejection%2Ffile%2F3deec5293ae1eabb13.pdf&ei=sGgqU7qsG4i3rAf63IHQCQ&usg=AFQjCNGKVHXdSzl35Btuhn0bRsmUWCII_A&sig2=wpkA6p4zOMqc8hE7BEFVhQ
7) WindPower Innovations, a CTKH subsidiary. http://www.joesdata.com/executive/Fayiz_K_Hilal_151830520.html
8) A bilingual(Chinese and English)ceramic engineer was on short-term contract at Cetek Technologies, Inc, from 10/2009 to 01/2010, working on large area alumina tape casting. Please take note of the PHD graduate qualifications at:
http://www.postjobfree.com/resume/abm2vl/zeolite-nanomaterials-screen-edm-poughkeepsie-ny
9) 5 years ago, CTKH provided ceramics, engineering, and $100k to the heat exchanger project with WilsonTurboPower. The WTP paper is called "Design and Performance of a High-Temperature Regenerator Having Very High Effectiveness, Low Leakage and Negligible Seal Wear." It is available for download at www.WilsonTurboPower.com/regenerator.
10) Fermi National Accelerator Laboratory, world famous national laboratory specializing in high-energy particle physics, had Hybrid-Tek as an external vendor in 2012.
Hybrid-Tek's involvement is documented in a government document titled "PX Chopper Driver Development at SLAC", and Hybrid-Tek is listed in the middle of the page as one of the the external vendors for the ceramic PCB (printed circuit board).
The link is: http://webcache.googleusercontent.com/search?q=cache:ewMQ91KXYI0J:https://indico.fnal.gov/materialDisplay.py%3FcontribId%3D87%26sessionId%3D19%26materialId%3Dslides%26confId%3D5300+&cd=17&hl=en&ct=clnk&gl=us
11) Finally, Los Alamos Neutron Science Center used a CTKH Macor circuit board that is 1.52mm in size for a project called the LANSCE Harp Upgrade. The link to the description of the project known as Tupsm014 is included below, and Cetek Technologies is listed on page 136 item 5 as the manufacturer of the Macor circuit board.
http://epaper.kek.jp/BIW2010/papers/tupsm014.pdf
CTKH basing at .0003 - pop coming soon...
recent updates CTKH D&D synopsis
Share Structure, Facts, & Scientific Contribution, 30march
CTKH share structure consists of 10B authorized shares, and 5M preferred shares.
S/O on 23 May, 2006 was 5,281,271,144. There is no reason to believe that the O/S has increased since.
The preferred shares are owned by Mr. Hilal, and the votes per share are determined by the board, as required.
Details on share structure at http://www.otcmarkets.com/financialReportViewer?symbol=CTKH&id=8078
Prior to the Reverse Split of 150 to 1, The Hilal family trust owned 18% of those shares. The RS decimated their 18% to basically nothing.
Cetek Technologies has 3 subsidiaries; Cetek Inc, Hybrid-Tek, and WindPower Innovations Inc. Belanger is an affiliate of Cetek Inc.
CTKH has received a recent improved credit rating from Dun&Bradstreet.
CTKH has become ITAR compliant.
Nevada SOS requires an update at the end of the 1 year reinstatement period. CTKH report is due by 4/30/2014.
Cetek Technologies contribution to science;
1) CTKH is working in LTCC technology:
http://mwrf.com/systems/microwave-modules-increasing-integration
2) Planar Electrode Quadrupole Ion Traps,
(Electrical and Computer Engineering.
Chemistry,) Brigham Young University, Provo, UT. The Substrate for the experiment was provided by Hybrid-Tek.
See Page 2.
http://digitalcommons.usu.edu/cgi/viewcontent.cgi?article=1068&context=spacegrant
3) Optical Hybrid, Ohio State U, alumina silicate and macor provided by HTI.
Page 8,
http://www-physics.lbl.gov/~gilg/Nov00PixelBaselineReview/Gan.pdf
4) North Carolina State University; a research thesis required piezoelectric stack actuators which were made from green machined alumina oxide that were provided by Cetek Technologies.
Page 144
http://repository.lib.ncsu.edu/ir/bitstream/1840.16/7507/1/etd.pdf
5) HTI assembled boards for this Drexel University research thesis, and it is on page 67. To quote "All ceramic hybrid circuit boards presented in this chapter were printed and assembled in Hybrid-TEK, Inc., New Jersey."
http://idea.library.drexel.edu/bitstream/1860/3823/1/Zhou_Liming.pdf
6) Hybrid-Tek involved in Performance of a Halo Ion Trap Mass Analyzer
with Exit Slits for Axial Ejection.
The plates were constructed from alumina substrates (50.00-mm diameter, 0.635-mm thickness, 99.6% purity; Hybrid-Tek, Clarksburg,)
http://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&source=web&cd=30&ved=0CNsBEBYwHQ&url=http%3A%2F%2Fwww.researchgate.net%2Fpublication%2F51031871_Performance_of_a_halo_ion_trap_mass_analyzer_with_exit_slits_for_axial_ejection%2Ffile%2F3deec5293ae1eabb13.pdf&ei=sGgqU7qsG4i3rAf63IHQCQ&usg=AFQjCNGKVHXdSzl35Btuhn0bRsmUWCII_A&sig2=wpkA6p4zOMqc8hE7BEFVhQ
7) WindPower Innovations, a CTKH subsidiary. http://www.joesdata.com/executive/Fayiz_K_Hilal_151830520.html
8) A bilingual(Chinese and English)ceramic engineer was on short-term contract at Cetek Technologies, Inc, from 10/2009 to 01/2010, working on large area alumina tape casting. Please take note of the PHD graduate qualifications at:
http://www.postjobfree.com/resume/abm2vl/zeolite-nanomaterials-screen-edm-poughkeepsie-ny
9) 5 years ago, CTKH provided ceramics, engineering, and $100k to the heat exchanger project with WilsonTurboPower. The WTP paper is called "Design and Performance of a High-Temperature Regenerator Having Very High Effectiveness, Low Leakage and Negligible Seal Wear." It is available for download at www.WilsonTurboPower.com/regenerator.
10) Fermi National Accelerator Laboratory, world famous national laboratory specializing in high-energy particle physics, had Hybrid-Tek as an external vendor in 2012.
Hybrid-Tek's involvement is documented in a government document titled "PX Chopper Driver Development at SLAC", and Hybrid-Tek is listed in the middle of the page as one of the the external vendors for the ceramic PCB (printed circuit board).
The link is: http://webcache.googleusercontent.com/search?q=cache:ewMQ91KXYI0J:https://indico.fnal.gov/materialDisplay.py%3FcontribId%3D87%26sessionId%3D19%26materialId%3Dslides%26confId%3D5300+&cd=17&hl=en&ct=clnk&gl=us
11) Finally, Los Alamos Neutron Science Center used a CTKH Macor circuit board that is 1.52mm in size for a project called the LANSCE Harp Upgrade. The link to the description of the project known as Tupsm014 is included below, and Cetek Technologies is listed on page 136 item 5 as the manufacturer of the Macor circuit board.
http://epaper.kek.jp/BIW2010/papers/tupsm014.pdf
CTKH new D&D
recent updates CTKH D&D synopsis
Share Structure, Facts, & Scientific Contribution, 30march
CTKH share structure consists of 10B authorized shares, and 5M preferred shares.
S/O on 23 May, 2006 was 5,281,271,144. There is no reason to believe that the O/S has increased since.
The preferred shares are owned by Mr. Hilal, and the votes per share are determined by the board, as required.
Details on share structure at http://www.otcmarkets.com/financialReportViewer?symbol=CTKH&id=8078
Prior to the Reverse Split of 150 to 1, The Hilal family trust owned 18% of those shares. The RS decimated their 18% to basically nothing.
Cetek Technologies has 3 subsidiaries; Cetek Inc, Hybrid-Tek, and WindPower Innovations Inc. Belanger is an affiliate of Cetek Inc.
CTKH has received a recent improved credit rating from Dun&Bradstreet.
CTKH has become ITAR compliant.
Nevada SOS requires an update at the end of the 1 year reinstatement period. CTKH report is due by 4/30/2014.
Cetek Technologies contribution to science;
1) CTKH is working in LTCC technology:
http://mwrf.com/systems/microwave-modules-increasing-integration
2) Planar Electrode Quadrupole Ion Traps,
(Electrical and Computer Engineering.
Chemistry,) Brigham Young University, Provo, UT. The Substrate for the experiment was provided by Hybrid-Tek.
See Page 2.
http://digitalcommons.usu.edu/cgi/viewcontent.cgi?article=1068&context=spacegrant
3) Optical Hybrid, Ohio State U, alumina silicate and macor provided by HTI.
Page 8,
http://www-physics.lbl.gov/~gilg/Nov00PixelBaselineReview/Gan.pdf
4) North Carolina State University; a research thesis required piezoelectric stack actuators which were made from green machined alumina oxide that were provided by Cetek Technologies.
Page 144
http://repository.lib.ncsu.edu/ir/bitstream/1840.16/7507/1/etd.pdf
5) HTI assembled boards for this Drexel University research thesis, and it is on page 67. To quote "All ceramic hybrid circuit boards presented in this chapter were printed and assembled in Hybrid-TEK, Inc., New Jersey."
http://idea.library.drexel.edu/bitstream/1860/3823/1/Zhou_Liming.pdf
6) Hybrid-Tek involved in Performance of a Halo Ion Trap Mass Analyzer
with Exit Slits for Axial Ejection.
The plates were constructed from alumina substrates (50.00-mm diameter, 0.635-mm thickness, 99.6% purity; Hybrid-Tek, Clarksburg,)
http://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&source=web&cd=30&ved=0CNsBEBYwHQ&url=http%3A%2F%2Fwww.researchgate.net%2Fpublication%2F51031871_Performance_of_a_halo_ion_trap_mass_analyzer_with_exit_slits_for_axial_ejection%2Ffile%2F3deec5293ae1eabb13.pdf&ei=sGgqU7qsG4i3rAf63IHQCQ&usg=AFQjCNGKVHXdSzl35Btuhn0bRsmUWCII_A&sig2=wpkA6p4zOMqc8hE7BEFVhQ
7) WindPower Innovations, a CTKH subsidiary. http://www.joesdata.com/executive/Fayiz_K_Hilal_151830520.html
8) A bilingual(Chinese and English)ceramic engineer was on short-term contract at Cetek Technologies, Inc, from 10/2009 to 01/2010, working on large area alumina tape casting. Please take note of the PHD graduate qualifications at:
http://www.postjobfree.com/resume/abm2vl/zeolite-nanomaterials-screen-edm-poughkeepsie-ny
9) 5 years ago, CTKH provided ceramics, engineering, and $100k to the heat exchanger project with WilsonTurboPower. The WTP paper is called "Design and Performance of a High-Temperature Regenerator Having Very High Effectiveness, Low Leakage and Negligible Seal Wear." It is available for download at www.WilsonTurboPower.com/regenerator.
10) Fermi National Accelerator Laboratory, world famous national laboratory specializing in high-energy particle physics, had Hybrid-Tek as an external vendor in 2012.
Hybrid-Tek's involvement is documented in a government document titled "PX Chopper Driver Development at SLAC", and Hybrid-Tek is listed in the middle of the page as one of the the external vendors for the ceramic PCB (printed circuit board).
The link is: http://webcache.googleusercontent.com/search?q=cache:ewMQ91KXYI0J:https://indico.fnal.gov/materialDisplay.py%3FcontribId%3D87%26sessionId%3D19%26materialId%3Dslides%26confId%3D5300+&cd=17&hl=en&ct=clnk&gl=us
11) Finally, Los Alamos Neutron Science Center used a CTKH Macor circuit board that is 1.52mm in size for a project called the LANSCE Harp Upgrade. The link to the description of the project known as Tupsm014 is included below, and Cetek Technologies is listed on page 136 item 5 as the manufacturer of the Macor circuit board.
http://epaper.kek.jp/BIW2010/papers/tupsm014.pdf
recent updates CTKH D&D synopsis
Share Structure, Facts, & Scientific Contribution, 30march
CTKH share structure consists of 10B authorized shares, and 5M preferred shares.
S/O on 23 May, 2006 was 5,281,271,144. There is no reason to believe that the O/S has increased since.
The preferred shares are owned by Mr. Hilal, and the votes per share are determined by the board, as required.
Details on share structure at http://www.otcmarkets.com/financialReportViewer?symbol=CTKH&id=8078
Prior to the Reverse Split of 150 to 1, The Hilal family trust owned 18% of those shares. The RS decimated their 18% to basically nothing.
Cetek Technologies has 3 subsidiaries; Cetek Inc, Hybrid-Tek, and WindPower Innovations Inc. Belanger is an affiliate of Cetek Inc.
CTKH has received a recent improved credit rating from Dun&Bradstreet.
CTKH has become ITAR compliant.
Nevada SOS requires an update at the end of the 1 year reinstatement period. CTKH report is due by 4/30/2014.
Cetek Technologies contribution to science;
1) CTKH is working in LTCC technology:
http://mwrf.com/systems/microwave-modules-increasing-integration
2) Planar Electrode Quadrupole Ion Traps,
(Electrical and Computer Engineering.
Chemistry,) Brigham Young University, Provo, UT. The Substrate for the experiment was provided by Hybrid-Tek.
See Page 2.
http://digitalcommons.usu.edu/cgi/viewcontent.cgi?article=1068&context=spacegrant
3) Optical Hybrid, Ohio State U, alumina silicate and macor provided by HTI.
Page 8,
http://www-physics.lbl.gov/~gilg/Nov00PixelBaselineReview/Gan.pdf
4) North Carolina State University; a research thesis required piezoelectric stack actuators which were made from green machined alumina oxide that were provided by Cetek Technologies.
Page 144
http://repository.lib.ncsu.edu/ir/bitstream/1840.16/7507/1/etd.pdf
5) HTI assembled boards for this Drexel University research thesis, and it is on page 67. To quote "All ceramic hybrid circuit boards presented in this chapter were printed and assembled in Hybrid-TEK, Inc., New Jersey."
http://idea.library.drexel.edu/bitstream/1860/3823/1/Zhou_Liming.pdf
6) Hybrid-Tek involved in Performance of a Halo Ion Trap Mass Analyzer
with Exit Slits for Axial Ejection.
The plates were constructed from alumina substrates (50.00-mm diameter, 0.635-mm thickness, 99.6% purity; Hybrid-Tek, Clarksburg,)
http://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&source=web&cd=30&ved=0CNsBEBYwHQ&url=http%3A%2F%2Fwww.researchgate.net%2Fpublication%2F51031871_Performance_of_a_halo_ion_trap_mass_analyzer_with_exit_slits_for_axial_ejection%2Ffile%2F3deec5293ae1eabb13.pdf&ei=sGgqU7qsG4i3rAf63IHQCQ&usg=AFQjCNGKVHXdSzl35Btuhn0bRsmUWCII_A&sig2=wpkA6p4zOMqc8hE7BEFVhQ
7) WindPower Innovations, a CTKH subsidiary. http://www.joesdata.com/executive/Fayiz_K_Hilal_151830520.html
8) A bilingual(Chinese and English)ceramic engineer was on short-term contract at Cetek Technologies, Inc, from 10/2009 to 01/2010, working on large area alumina tape casting. Please take note of the PHD graduate qualifications at:
http://www.postjobfree.com/resume/abm2vl/zeolite-nanomaterials-screen-edm-poughkeepsie-ny
9) 5 years ago, CTKH provided ceramics, engineering, and $100k to the heat exchanger project with WilsonTurboPower. The WTP paper is called "Design and Performance of a High-Temperature Regenerator Having Very High Effectiveness, Low Leakage and Negligible Seal Wear." It is available for download at www.WilsonTurboPower.com/regenerator.
10) Fermi National Accelerator Laboratory, world famous national laboratory specializing in high-energy particle physics, had Hybrid-Tek as an external vendor in 2012.
Hybrid-Tek's involvement is documented in a government document titled "PX Chopper Driver Development at SLAC", and Hybrid-Tek is listed in the middle of the page as one of the the external vendors for the ceramic PCB (printed circuit board).
The link is: http://webcache.googleusercontent.com/search?q=cache:ewMQ91KXYI0J:https://indico.fnal.gov/materialDisplay.py%3FcontribId%3D87%26sessionId%3D19%26materialId%3Dslides%26confId%3D5300+&cd=17&hl=en&ct=clnk&gl=us
11) Finally, Los Alamos Neutron Science Center used a CTKH Macor circuit board that is 1.52mm in size for a project called the LANSCE Harp Upgrade. The link to the description of the project known as Tupsm014 is included below, and Cetek Technologies is listed on page 136 item 5 as the manufacturer of the Macor circuit board.
http://epaper.kek.jp/BIW2010/papers/tupsm014.pdf
recent updates CTKH D&D synopsis
Share Structure, Facts, & Scientific Contribution, 30march
CTKH share structure consists of 10B authorized shares, and 5M preferred shares.
S/O on 23 May, 2006 was 5,281,271,144. There is no reason to believe that the O/S has increased since.
The preferred shares are owned by Mr. Hilal, and the votes per share are determined by the board, as required.
Details on share structure at http://www.otcmarkets.com/financialReportViewer?symbol=CTKH&id=8078
Prior to the Reverse Split of 150 to 1, The Hilal family trust owned 18% of those shares. The RS decimated their 18% to basically nothing.
Cetek Technologies has 3 subsidiaries; Cetek Inc, Hybrid-Tek, and WindPower Innovations Inc. Belanger is an affiliate of Cetek Inc.
CTKH has received a recent improved credit rating from Dun&Bradstreet.
CTKH has become ITAR compliant.
Nevada SOS requires an update at the end of the 1 year reinstatement period. CTKH report is due by 4/30/2014.
Cetek Technologies contribution to science;
1) CTKH is working in LTCC technology:
http://mwrf.com/systems/microwave-modules-increasing-integration
2) Planar Electrode Quadrupole Ion Traps,
(Electrical and Computer Engineering.
Chemistry,) Brigham Young University, Provo, UT. The Substrate for the experiment was provided by Hybrid-Tek.
See Page 2.
http://digitalcommons.usu.edu/cgi/viewcontent.cgi?article=1068&context=spacegrant
3) Optical Hybrid, Ohio State U, alumina silicate and macor provided by HTI.
Page 8,
http://www-physics.lbl.gov/~gilg/Nov00PixelBaselineReview/Gan.pdf
4) North Carolina State University; a research thesis required piezoelectric stack actuators which were made from green machined alumina oxide that were provided by Cetek Technologies.
Page 144
http://repository.lib.ncsu.edu/ir/bitstream/1840.16/7507/1/etd.pdf
5) HTI assembled boards for this Drexel University research thesis, and it is on page 67. To quote "All ceramic hybrid circuit boards presented in this chapter were printed and assembled in Hybrid-TEK, Inc., New Jersey."
http://idea.library.drexel.edu/bitstream/1860/3823/1/Zhou_Liming.pdf
6) Hybrid-Tek involved in Performance of a Halo Ion Trap Mass Analyzer
with Exit Slits for Axial Ejection.
The plates were constructed from alumina substrates (50.00-mm diameter, 0.635-mm thickness, 99.6% purity; Hybrid-Tek, Clarksburg,)
http://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&source=web&cd=30&ved=0CNsBEBYwHQ&url=http%3A%2F%2Fwww.researchgate.net%2Fpublication%2F51031871_Performance_of_a_halo_ion_trap_mass_analyzer_with_exit_slits_for_axial_ejection%2Ffile%2F3deec5293ae1eabb13.pdf&ei=sGgqU7qsG4i3rAf63IHQCQ&usg=AFQjCNGKVHXdSzl35Btuhn0bRsmUWCII_A&sig2=wpkA6p4zOMqc8hE7BEFVhQ
7) WindPower Innovations, a CTKH subsidiary. http://www.joesdata.com/executive/Fayiz_K_Hilal_151830520.html
8) A bilingual(Chinese and English)ceramic engineer was on short-term contract at Cetek Technologies, Inc, from 10/2009 to 01/2010, working on large area alumina tape casting. Please take note of the PHD graduate qualifications at:
http://www.postjobfree.com/resume/abm2vl/zeolite-nanomaterials-screen-edm-poughkeepsie-ny
9) 5 years ago, CTKH provided ceramics, engineering, and $100k to the heat exchanger project with WilsonTurboPower. The WTP paper is called "Design and Performance of a High-Temperature Regenerator Having Very High Effectiveness, Low Leakage and Negligible Seal Wear." It is available for download at www.WilsonTurboPower.com/regenerator.
10) Fermi National Accelerator Laboratory, world famous national laboratory specializing in high-energy particle physics, had Hybrid-Tek as an external vendor in 2012.
Hybrid-Tek's involvement is documented in a government document titled "PX Chopper Driver Development at SLAC", and Hybrid-Tek is listed in the middle of the page as one of the the external vendors for the ceramic PCB (printed circuit board).
The link is: http://webcache.googleusercontent.com/search?q=cache:ewMQ91KXYI0J:https://indico.fnal.gov/materialDisplay.py%3FcontribId%3D87%26sessionId%3D19%26materialId%3Dslides%26confId%3D5300+&cd=17&hl=en&ct=clnk&gl=us
11) Finally, Los Alamos Neutron Science Center used a CTKH Macor circuit board that is 1.52mm in size for a project called the LANSCE Harp Upgrade. The link to the description of the project known as Tupsm014 is included below, and Cetek Technologies is listed on page 136 item 5 as the manufacturer of the Macor circuit board.
http://epaper.kek.jp/BIW2010/papers/tupsm014.pdf
CTKH D&D synopsis -- real company with real products in penny land?
Share Structure, Facts, & Scientific Contribution, 30march
CTKH share structure consists of 10B authorized shares, and 5M preferred shares.
S/O on 23 May, 2006 was 5,281,271,144. There is no reason to believe that the O/S has increased since.
The preferred shares are owned by Mr. Hilal, and the votes per share are determined by the board, as required.
Details on share structure at http://www.otcmarkets.com/financialReportViewer?symbol=CTKH&id=8078
Prior to the Reverse Split of 150 to 1, The Hilal family trust owned 18% of those shares. The RS decimated their 18% to basically nothing.
Cetek Technologies has 3 subsidiaries; Cetek Inc, Hybrid-Tek, and WindPower Innovations Inc. Belanger is an affiliate of Cetek Inc.
CTKH has received a recent improved credit rating from Dun&Bradstreet.
CTKH has become ITAR compliant.
Nevada SOS requires an update at the end of the 1 year reinstatement period. CTKH report is due by 4/30/2014.
Cetek Technologies contribution to science;
1) CTKH is working in LTCC technology:
http://mwrf.com/systems/microwave-modules-increasing-integration
2) Planar Electrode Quadrupole Ion Traps,
(Electrical and Computer Engineering.
Chemistry,) Brigham Young University, Provo, UT. The Substrate for the experiment was provided by Hybrid-Tek.
See Page 2.
http://digitalcommons.usu.edu/cgi/viewcontent.cgi?article=1068&context=spacegrant
3) Optical Hybrid, Ohio State U, alumina silicate and macor provided by HTI.
Page 8,
http://www-physics.lbl.gov/~gilg/Nov00PixelBaselineReview/Gan.pdf
4) North Carolina State University; a research thesis required piezoelectric stack actuators which were made from green machined alumina oxide that were provided by Cetek Technologies.
Page 144
http://repository.lib.ncsu.edu/ir/bitstream/1840.16/7507/1/etd.pdf
5) HTI assembled boards for this Drexel University research thesis, and it is on page 67. To quote "All ceramic hybrid circuit boards presented in this chapter were printed and assembled in Hybrid-TEK, Inc., New Jersey."
http://idea.library.drexel.edu/bitstream/1860/3823/1/Zhou_Liming.pdf
6) Hybrid-Tek involved in Performance of a Halo Ion Trap Mass Analyzer
with Exit Slits for Axial Ejection.
The plates were constructed from alumina substrates (50.00-mm diameter, 0.635-mm thickness, 99.6% purity; Hybrid-Tek, Clarksburg,)
http://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&source=web&cd=30&ved=0CNsBEBYwHQ&url=http%3A%2F%2Fwww.researchgate.net%2Fpublication%2F51031871_Performance_of_a_halo_ion_trap_mass_analyzer_with_exit_slits_for_axial_ejection%2Ffile%2F3deec5293ae1eabb13.pdf&ei=sGgqU7qsG4i3rAf63IHQCQ&usg=AFQjCNGKVHXdSzl35Btuhn0bRsmUWCII_A&sig2=wpkA6p4zOMqc8hE7BEFVhQ
7) WindPower Innovations, a CTKH subsidiary. http://www.joesdata.com/executive/Fayiz_K_Hilal_151830520.html
8) A bilingual(Chinese and English)ceramic engineer was on short-term contract at Cetek Technologies, Inc, from 10/2009 to 01/2010, working on large area alumina tape casting. Please take note of the PHD graduate qualifications at:
http://www.postjobfree.com/resume/abm2vl/zeolite-nanomaterials-screen-edm-poughkeepsie-ny
9) 5 years ago, CTKH provided ceramics, engineering, and $100k to the heat exchanger project with WilsonTurboPower. The WTP paper is called "Design and Performance of a High-Temperature Regenerator Having Very High Effectiveness, Low Leakage and Negligible Seal Wear." It is available for download at www.WilsonTurboPower.com/regenerator.
10) Fermi National Accelerator Laboratory, world famous national laboratory specializing in high-energy particle physics, had Hybrid-Tek as an external vendor in 2012.
Hybrid-Tek's involvement is documented in a government document titled "PX Chopper Driver Development at SLAC", and Hybrid-Tek is listed in the middle of the page as one of the the external vendors for the ceramic PCB (printed circuit board).
The link is: http://webcache.googleusercontent.com/search?q=cache:ewMQ91KXYI0J:https://indico.fnal.gov/materialDisplay.py%3FcontribId%3D87%26sessionId%3D19%26materialId%3Dslides%26confId%3D5300+&cd=17&hl=en&ct=clnk&gl=us
11) Finally, Los Alamos Neutron Science Center used a CTKH Macor circuit board that is 1.52mm in size for a project called the LANSCE Harp Upgrade. The link to the description of the project known as Tupsm014 is included below, and Cetek Technologies is listed on page 136 item 5 as the manufacturer of the Macor circuit board.
http://epaper.kek.jp/BIW2010/papers/tupsm014.pdf
CTKH D&D synopsis
Share Structure, Facts, & Scientific Contribution, 30march
CTKH share structure consists of 10B authorized shares, and 5M preferred shares.
S/O on 23 May, 2006 was 5,281,271,144. There is no reason to believe that the O/S has increased since.
The preferred shares are owned by Mr. Hilal, and the votes per share are determined by the board, as required.
Details on share structure at www.otcmarkets.com/financialReportViewer?symbol=CTKH&id=8078
Prior to the Reverse Split of 150 to 1, The Hilal family trust owned 18% of those shares. The RS decimated their 18% to basically nothing.
Cetek Technologies has 3 subsidiaries; Cetek Inc, Hybrid-Tek, and WindPower Innovations Inc. Belanger is an affiliate of Cetek Inc.
CTKH has received a recent improved credit rating from Dun&Bradstreet.
CTKH has become ITAR compliant.
Nevada SOS requires an update at the end of the 1 year reinstatement period. CTKH report is due by 4/30/2014.
Cetek Technologies contribution to science;
1) CTKH is working in LTCC technology:
http://mwrf.com/systems/microwave-modules-increasing-integration
2) Planar Electrode Quadrupole Ion Traps,
(Electrical and Computer Engineering.
Chemistry,) Brigham Young University, Provo, UT. The Substrate for the experiment was provided by Hybrid-Tek.
See Page 2.
http://digitalcommons.usu.edu/cgi/viewcontent.cgi?article=1068&context=spacegrant
3) Optical Hybrid, Ohio State U, alumina silicate and macor provided by HTI.
Page 8,
http://www-physics.lbl.gov/~gilg/Nov00PixelBaselineReview/Gan.pdf
4) North Carolina State University; a research thesis required piezoelectric stack actuators which were made from green machined alumina oxide that were provided by Cetek Technologies.
Page 144
http://repository.lib.ncsu.edu/ir/bitstream/1840.16/7507/1/etd.pdf
5) HTI assembled boards for this Drexel University research thesis, and it is on page 67. To quote "All ceramic hybrid circuit boards presented in this chapter were printed and assembled in Hybrid-TEK, Inc., New Jersey."
http://idea.library.drexel.edu/bitstream/1860/3823/1/Zhou_Liming.pdf
6) Hybrid-Tek involved in Performance of a Halo Ion Trap Mass Analyzer
with Exit Slits for Axial Ejection.
The plates were constructed from alumina substrates (50.00-mm diameter, 0.635-mm thickness, 99.6% purity; Hybrid-Tek, Clarksburg,)
http://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&source=web&cd=30&ved=0CNsBEBYwHQ&url=http%3A%2F%2Fwww.researchgate.net%2Fpublication%2F51031871_Performance_of_a_halo_ion_trap_mass_analyzer_with_exit_slits_for_axial_ejection%2Ffile%2F3deec5293ae1eabb13.pdf&ei=sGgqU7qsG4i3rAf63IHQCQ&usg=AFQjCNGKVHXdSzl35Btuhn0bRsmUWCII_A&sig2=wpkA6p4zOMqc8hE7BEFVhQ
7) WindPower Innovations, a CTKH subsidiary. http://www.joesdata.com/executive/Fayiz_K_Hilal_151830520.html
8) A bilingual(Chinese and English)ceramic engineer was on short-term contract at Cetek Technologies, Inc, from 10/2009 to 01/2010, working on large area alumina tape casting. Please take note of the PHD graduate qualifications at:
http://www.postjobfree.com/resume/abm2vl/zeolite-nanomaterials-screen-edm-poughkeepsie-ny
9) 5 years ago, CTKH provided ceramics, engineering, and $100k to the heat exchanger project with WilsonTurboPower. The WTP paper is called "Design and Performance of a High-Temperature Regenerator Having Very High Effectiveness, Low Leakage and Negligible Seal Wear." It is available for download at www.WilsonTurboPower.com/regenerator.
10) Fermi National Accelerator Laboratory, world famous national laboratory specializing in high-energy particle physics, had Hybrid-Tek as an external vendor in 2012.
Hybrid-Tek's involvement is documented in a government document titled "PX Chopper Driver Development at SLAC", and Hybrid-Tek is listed in the middle of the page as one of the the external vendors for the ceramic PCB (printed circuit board).
The link is: http://webcache.googleusercontent.com/search?q=cache:ewMQ91KXYI0J:https://indico.fnal.gov/materialDisplay.py%3FcontribId%3D87%26sessionId%3D19%26materialId%3Dslides%26confId%3D5300+&cd=17&hl=en&ct=clnk&gl=us
11) Finally, Los Alamos Neutron Science Center used a CTKH Macor circuit board that is 1.52mm in size for a project called the LANSCE Harp Upgrade. The link to the description of the project known as Tupsm014 is included below, and Cetek Technologies is listed on page 136 item 5 as the manufacturer of the Macor circuit board.
http://epaper.kek.jp/BIW2010/papers/tupsm014.pdf
recent updates CTKH D&D synopsis
Share Structure, Facts, & Scientific Contribution, 30march
CTKH share structure consists of 10B authorized shares, and 5M preferred shares.
S/O on 23 May, 2006 was 5,281,271,144. There is no reason to believe that the O/S has increased since.
The preferred shares are owned by Mr. Hilal, and the votes per share are determined by the board, as required.
Details on share structure at http://www.otcmarkets.com/financialReportViewer?symbol=CTKH&id=8078
Prior to the Reverse Split of 150 to 1, The Hilal family trust owned 18% of those shares. The RS decimated their 18% to basically nothing.
Cetek Technologies has 3 subsidiaries; Cetek Inc, Hybrid-Tek, and WindPower Innovations Inc. Belanger is an affiliate of Cetek Inc.
CTKH has received a recent improved credit rating from Dun&Bradstreet.
CTKH has become ITAR compliant.
Nevada SOS requires an update at the end of the 1 year reinstatement period. CTKH report is due by 4/30/2014.
Cetek Technologies contribution to science;
1) CTKH is working in LTCC technology:
http://mwrf.com/systems/microwave-modules-increasing-integration
2) Planar Electrode Quadrupole Ion Traps,
(Electrical and Computer Engineering.
Chemistry,) Brigham Young University, Provo, UT. The Substrate for the experiment was provided by Hybrid-Tek.
See Page 2.
http://digitalcommons.usu.edu/cgi/viewcontent.cgi?article=1068&context=spacegrant
3) Optical Hybrid, Ohio State U, alumina silicate and macor provided by HTI.
Page 8,
http://www-physics.lbl.gov/~gilg/Nov00PixelBaselineReview/Gan.pdf
4) North Carolina State University; a research thesis required piezoelectric stack actuators which were made from green machined alumina oxide that were provided by Cetek Technologies.
Page 144
http://repository.lib.ncsu.edu/ir/bitstream/1840.16/7507/1/etd.pdf
5) HTI assembled boards for this Drexel University research thesis, and it is on page 67. To quote "All ceramic hybrid circuit boards presented in this chapter were printed and assembled in Hybrid-TEK, Inc., New Jersey."
http://idea.library.drexel.edu/bitstream/1860/3823/1/Zhou_Liming.pdf
6) Hybrid-Tek involved in Performance of a Halo Ion Trap Mass Analyzer
with Exit Slits for Axial Ejection.
The plates were constructed from alumina substrates (50.00-mm diameter, 0.635-mm thickness, 99.6% purity; Hybrid-Tek, Clarksburg,)
http://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&source=web&cd=30&ved=0CNsBEBYwHQ&url=http%3A%2F%2Fwww.researchgate.net%2Fpublication%2F51031871_Performance_of_a_halo_ion_trap_mass_analyzer_with_exit_slits_for_axial_ejection%2Ffile%2F3deec5293ae1eabb13.pdf&ei=sGgqU7qsG4i3rAf63IHQCQ&usg=AFQjCNGKVHXdSzl35Btuhn0bRsmUWCII_A&sig2=wpkA6p4zOMqc8hE7BEFVhQ
7) WindPower Innovations, a CTKH subsidiary. http://www.joesdata.com/executive/Fayiz_K_Hilal_151830520.html
8) A bilingual(Chinese and English)ceramic engineer was on short-term contract at Cetek Technologies, Inc, from 10/2009 to 01/2010, working on large area alumina tape casting. Please take note of the PHD graduate qualifications at:
http://www.postjobfree.com/resume/abm2vl/zeolite-nanomaterials-screen-edm-poughkeepsie-ny
9) 5 years ago, CTKH provided ceramics, engineering, and $100k to the heat exchanger project with WilsonTurboPower. The WTP paper is called "Design and Performance of a High-Temperature Regenerator Having Very High Effectiveness, Low Leakage and Negligible Seal Wear." It is available for download at www.WilsonTurboPower.com/regenerator.
10) Fermi National Accelerator Laboratory, world famous national laboratory specializing in high-energy particle physics, had Hybrid-Tek as an external vendor in 2012.
Hybrid-Tek's involvement is documented in a government document titled "PX Chopper Driver Development at SLAC", and Hybrid-Tek is listed in the middle of the page as one of the the external vendors for the ceramic PCB (printed circuit board).
The link is: http://webcache.googleusercontent.com/search?q=cache:ewMQ91KXYI0J:https://indico.fnal.gov/materialDisplay.py%3FcontribId%3D87%26sessionId%3D19%26materialId%3Dslides%26confId%3D5300+&cd=17&hl=en&ct=clnk&gl=us
11) Finally, Los Alamos Neutron Science Center used a CTKH Macor circuit board that is 1.52mm in size for a project called the LANSCE Harp Upgrade. The link to the description of the project known as Tupsm014 is included below, and Cetek Technologies is listed on page 136 item 5 as the manufacturer of the Macor circuit board.
http://epaper.kek.jp/BIW2010/papers/tupsm014.pdf
CTKH D&D synopsis
Share Structure, Facts, & Scientific Contribution, 30march
CTKH share structure consists of 10B authorized shares, and 5M preferred shares.
S/O on 23 May, 2006 was 5,281,271,144. There is no reason to believe that the O/S has increased since.
The preferred shares are owned by Mr. Hilal, and the votes per share are determined by the board, as required.
Details on share structure at http://www.otcmarkets.com/financialReportViewer?symbol=CTKH&id=8078
Prior to the Reverse Split of 150 to 1, The Hilal family trust owned 18% of those shares. The RS decimated their 18% to basically nothing.
Cetek Technologies has 3 subsidiaries; Cetek Inc, Hybrid-Tek, and WindPower Innovations Inc. Belanger is an affiliate of Cetek Inc.
CTKH has received a recent improved credit rating from Dun&Bradstreet.
CTKH has become ITAR compliant.
Nevada SOS requires an update at the end of the 1 year reinstatement period. CTKH report is due by 4/30/2014.
Cetek Technologies contribution to science;
1) CTKH is working in LTCC technology:
http://mwrf.com/systems/microwave-modules-increasing-integration
2) Planar Electrode Quadrupole Ion Traps,
(Electrical and Computer Engineering.
Chemistry,) Brigham Young University, Provo, UT. The Substrate for the experiment was provided by Hybrid-Tek.
See Page 2.
http://digitalcommons.usu.edu/cgi/viewcontent.cgi?article=1068&context=spacegrant
3) Optical Hybrid, Ohio State U, alumina silicate and macor provided by HTI.
Page 8,
http://www-physics.lbl.gov/~gilg/Nov00PixelBaselineReview/Gan.pdf
4) North Carolina State University; a research thesis required piezoelectric stack actuators which were made from green machined alumina oxide that were provided by Cetek Technologies.
Page 144
http://repository.lib.ncsu.edu/ir/bitstream/1840.16/7507/1/etd.pdf
5) HTI assembled boards for this Drexel University research thesis, and it is on page 67. To quote "All ceramic hybrid circuit boards presented in this chapter were printed and assembled in Hybrid-TEK, Inc., New Jersey."
http://idea.library.drexel.edu/bitstream/1860/3823/1/Zhou_Liming.pdf
6) Hybrid-Tek involved in Performance of a Halo Ion Trap Mass Analyzer
with Exit Slits for Axial Ejection.
The plates were constructed from alumina substrates (50.00-mm diameter, 0.635-mm thickness, 99.6% purity; Hybrid-Tek, Clarksburg,)
http://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&source=web&cd=30&ved=0CNsBEBYwHQ&url=http%3A%2F%2Fwww.researchgate.net%2Fpublication%2F51031871_Performance_of_a_halo_ion_trap_mass_analyzer_with_exit_slits_for_axial_ejection%2Ffile%2F3deec5293ae1eabb13.pdf&ei=sGgqU7qsG4i3rAf63IHQCQ&usg=AFQjCNGKVHXdSzl35Btuhn0bRsmUWCII_A&sig2=wpkA6p4zOMqc8hE7BEFVhQ
7) WindPower Innovations, a CTKH subsidiary. http://www.joesdata.com/executive/Fayiz_K_Hilal_151830520.html
8) A bilingual(Chinese and English)ceramic engineer was on short-term contract at Cetek Technologies, Inc, from 10/2009 to 01/2010, working on large area alumina tape casting. Please take note of the PHD graduate qualifications at:
http://www.postjobfree.com/resume/abm2vl/zeolite-nanomaterials-screen-edm-poughkeepsie-ny
9) 5 years ago, CTKH provided ceramics, engineering, and $100k to the heat exchanger project with WilsonTurboPower. The WTP paper is called "Design and Performance of a High-Temperature Regenerator Having Very High Effectiveness, Low Leakage and Negligible Seal Wear." It is available for download at www.WilsonTurboPower.com/regenerator.
10) Fermi National Accelerator Laboratory, world famous national laboratory specializing in high-energy particle physics, had Hybrid-Tek as an external vendor in 2012.
Hybrid-Tek's involvement is documented in a government document titled "PX Chopper Driver Development at SLAC", and Hybrid-Tek is listed in the middle of the page as one of the the external vendors for the ceramic PCB (printed circuit board).
The link is: http://webcache.googleusercontent.com/search?q=cache:ewMQ91KXYI0J:https://indico.fnal.gov/materialDisplay.py%3FcontribId%3D87%26sessionId%3D19%26materialId%3Dslides%26confId%3D5300+&cd=17&hl=en&ct=clnk&gl=us
11) Finally, Los Alamos Neutron Science Center used a CTKH Macor circuit board that is 1.52mm in size for a project called the LANSCE Harp Upgrade. The link to the description of the project known as Tupsm014 is included below, and Cetek Technologies is listed on page 136 item 5 as the manufacturer of the Macor circuit board.
http://epaper.kek.jp/BIW2010/papers/tupsm014.pdf
found my place .... http://www.redfin.com/IL/Schaumburg/2150-Hickory-Ln-60195/home/13874415
I'm thinking 10th anniversary present for me and the wife May 30th ... his and her houses on 3.5 acres.
50 mil? where you pulling that out of?
20m +/- 50% at best ... I think most of are thinking 15-20 combined for all entities.
50 million a few years down the road, sure.
and who's to say he doesn't plan to... in conjunction w/ PR or financials. Perhaps FH wants to REALLY get those he feels drove the SP to oblivion. A cusip change in conjunction with news is much more likley to provide a sustained long term price appreciation instead of just another "run" .
As you've said many times here, it's about INFO. NSS, if they do/did exist is only icing on the cake here... not the substance. I neither know nor really care about it factoring in.
Your snarky ass comment about not knowing about that site is rather suspect. Those of us who do actually "invest" in a small number of stinky pinkies that have a real company and true potential along side their portfolio's of "legitimate" stocks don't really give a shite nor follow the "short situation". Unless all you do is just "play the pinks" --- why would I or anyone care? You often come across as a rather condescending ass sometimes Orange; despite that opinion, I like that you're around to provide counter point and keep us all looking at things from all possible angles.
Thanks for cutting that off at 100. I'll take a free ticket off them too. LOL; I'm such a cheap arseal... just nickname me Fayiz.
I'll go with that, thanks for cutting it off at 100...LOL ; I'm a cheap aers (just nickname me Fayiz) and I'll take a free ticket.
CTKH ready to pop...
.0003 to ? (.01-.10)by end of April.
Reinstated last summer with list of officers due by end of April and possibly required to become fully reporting again under ITARS certification recently earned for DOD related products/componets
$CTKH
ton of new recent info:
latest and greatest...
ITAR Compliant ( import/export of DOD materials/items)
confirmed Chinese websites distributing products
https://www.facebook.com/CTKHShareholders?ref=hl
CTKH posted ITAR certification on their website last week
new DD almost everyday ...
ITAR Compliant ( import/export of DOD materials/items)
confirmed Chinese websites distributing products
secondary location
https://www.facebook.com/CTKHShareholders?ref=hl
CTKH - ton of new info last week
ITAR Compliant ( import/export of DOD materials/items)
confirmed Chinese websites distributing products
https://www.facebook.com/CTKHShareholders?ref=hl
CTKH - ton of new info last week
ITAR Compliant ( import/export of DOD materials/items)
confirmed Chinese websites distributing products
https://www.facebook.com/CTKHShareholders?ref=hl
so someone is familiar...