Register for free to join our community of investors and share your ideas. You will also get access to streaming quotes, interactive charts, trades, portfolio, live options flow and more tools.
Register for free to join our community of investors and share your ideas. You will also get access to streaming quotes, interactive charts, trades, portfolio, live options flow and more tools.
Acting Governor Kim Guadagno and Senator Bob Gordon Commend AnythingIT’s Commitment to Reducing Electronic Waste in New Jersey
DEP Permit Enables Expansion of E-Waste Recycling, Reuse, Resale and Reclamation Services
January 31, 2013
Trenton, NJ – Advancing the Christie Administration’s effort to promote the recycling and reuse of obsolete and discarded electronic devices, Acting Governor Kim Guadagno today joined Bergen County officials for the ribbon-cutting of AnythingIT, a company that specializes in the recycling, recovery and reuse of electronic equipment.
Any word on the second AR-Box? Isn't it due this quarter?
There was a court hearing scheduled for this Morning. Let's see if any breakthroughs happened.
New study reports 98.9 percent implant accuracy when using Mazor Robotics Renaissance™ Guidance System for patients with significant spinal deformities
BY PR Newswire
— 9:00 AM ET 03/12/2013
ORLANDO, Fla., March 12, 2013 /PRNewswire/ -- A study recently published in European Spine Journal concluded 98.9 percent accuracy when implanting pedicle screws using Mazor Robotics (MZRTF) Renaissance™ Guidance System in a study group of 101 consecutive cases performed by Dr. Isador Lieberman of Texas Back Institute. 1 Ninety percent of the sample group had severe deformity and/or previous spine surgery that failed to correct the condition.
The clinical study stated, "In situations such as severe deformity or revision surgeries when the normal spinal anatomic landmarks have been altered or obscured, the robotic-guided system was especially useful to improve the accuracy in pedicle screw placement."
Historically, extreme curves and abnormalities of the spine with conditions such as scoliosis, can pose a significant challenge to surgeons when placing implants. Through virtual 3D planning software, Renaissance eliminates some of the difficulty and helps the surgeon obtain greater accuracy by guiding to the exact trajectories planned (watch "How it Works").
Nine hundred and forty nine implants were accurately placed and 11 implants were not initially placed in the ideal position, presumably due to "tool skiving" off the facet or transverse process.
To date, Mazor Robotics (MZRTF
Loading... Loading...
) technology has been used worldwide in thousands of cases, including more than 500 complex spine deformity and revision procedures.
Percutaneous and minimally-invasive (MIS) approaches were used in 25.3 percent of the surgeries in this study, exemplifying the applicability of Renaissance for MIS in the most complex spine surgeries. The authors noted, "The diverse patient population demonstrated the broad utility of this robotic-assisted system in challenging spine surgeries."
Additional peer-reviewed publications and presentations at leading scientific conferences have validated the accuracy, usability, and clinical advantages of Mazor Robotics (MZRTF
Loading... Loading...
) technology. For more information, visit www.MazorRobotics.com.
About Mazor
Mazor Robotics (MZRTF
Loading... Loading...
) is dedicated to the development of innovative surgical guidance systems and complementary products that provide a safer surgical environment for patients, surgeons, and operating room staff. Mazor Robotics (MZRTF
Loading... Loading...
)' systems have been successfully used in the placement of tens of thousands of implants in the United States and Europe.
1. Hu, X, Ohnmeiss D. Lieberman,I. Robotic-assisted pedicle screw placement: lessons learned from the first 102 patients. Eur Spine J (2013) 22:661-666.
Contact: Stephani Newman
Marketing Communications Manager
Mazor Robotics (MZRTF
Loading... Loading...
), Inc.
S.Newman@MazorRobotics-US.com
1 (800) 80 – MAZOR
SOURCE Mazor Robotics (MZRTF)
Next NY State Supreme Court Status Conference scheduled for 3/20.
Is this what we are waiting for?
BNSF Railway expects to be moving a million barrels of oil a day in the not too distant future, and it would like to move it with natural gas powered locomotives.
A BNSF train engine in Kansas. (AP Photo/The Hutchinson News, Sandra Milburn)The domestic oil and gas drilling boom has made oil more plentiful and gas abundant and cheap. The oil is locked in the mid-Continent, awaiting new pipelines, but it already is moving on trains.
Natural gas is now cheap enough to be considered as a fuel for locomotives and other vehicles.
At the same time, oil shipments by rail have soared, along with the increase in domestic crude production, up about 1 million barrels in the past year.
(Read More: Buffett to Cramer: 'Real Money' Spent on NatGas Rail Conversions)
BNSF CEO Matt Rose said the railroad now ships 525,000 barrels a day and expects that to grow to 700,000 barrels by the end of the year. Shipments could reach 1 million barrels in the next 18 months.
"Over the last several years, we've been working with our two rail engine suppliers, General Electric (GE) and Caterpillar (CAT), and we believe they have some real solutions," said Rose, speaking at the IHS CERAWeek conference in Houston.
Rose said the company plans to pilot a program for an LNG engine and will work with policy makers and regulators to seek approval over the next year. BNSF was once Burlington Northern and is owned by Berkshire Hathaway (BRK-A).
"This would be the largest transformation since from the steam locomotive to the diesel locomotive," he said. If approved, the engines would reduce emissions and provide more competitive rail product versus the highway, he said.
(Read More: Oil Supplies Are Key Topic at Annual CERA Week)
Rose said the first oil shipment by train was by EOG was in late 2009, and since then BNSF has seen a surge in oil shipments. Even with new pipelines coming on line, Rose expects the business to do well, since customers like the flexibility and it will be difficult to put pipelines into densely populated areas like the East Coast.
"Customers like it for flexibility and reliability. We also know we have to do it in a safe manner," he said.
Andrew Lipow of Lipow Oil Associates said about 65 percent of the Bakken oil produced in North Dakota is being shipped by rail currently.
BNSF is also shipping 275 million tons of coal this year, able to power 10 percent of the electricity generated in the U.S.
Mazor Robotics Renaissance™ reaches milestone with spine surgeons placing over 1,000 implants percutaneously
BY PR Newswire
— 9:00 AM ET 02/20/2013
NORCROSS, Ga., Feb. 20, 2013 /PRNewswire/ -- While only 10 to 15 percent of all spine surgeries are performed using minimally-invasive surgical (MIS) techniques, 25 percent of all Renaissance™ cases (1,019 and rising) have been executed percutaneously. Mazor Robotics (MZRTF
Loading... Loading...
), recently named one of The World's 50 Most Innovative Companies by Fast Company, offers advantages to patients and surgeons alike with Renaissance™, a surgical guidance system for spine and brain surgery. Mazor Robotics (MZRTF
Loading... Loading...
) technology is available at over 40 spine centers worldwide and has been used in thousands of spine procedures to date.
Although MIS spine surgery provides patients with benefits such as less scarring and shorter recovery time, surgeons performing such procedures have a higher risk of cancer due to the prolonged radiation exposure (fluoroscopy). In 2012, Faissal Zahrawi, MD, FACS, founder of Celebration (Fla.) Minimally Invasive Spine Institute, presented to The International Society for Minimal Intervention in Spinal Surgery (ISMISS) on the potential for reducing fluoroscopy in MIS spine surgery when using Renaissance™. Earlier this year, Dr. Zahrawi celebrated his 100th successful MIS case using Renaissance™.
Dr. Sven Kantelhardt's study in the European Spine Journal states "the use of robotic-guidance significantly increased accuracy of screw positioning while reducing the X-ray exposure."1 In comparison to freehand spine surgery, this clinical study proved that using Renaissance™:
improved implant accuracy by 70 percent,
reduced X-ray dosage by 56 percent,
reduced complication rates by 48 percent,
reduced need for re-operations by 46 percent, and
reduced average length of hospital stay by 27 percent.
Additional peer-reviewed publications and presentations at leading scientific conferences have validated the accuracy, usability, and clinical advantages of Mazor Robotics (MZRTF
Loading... Loading...
) technology. For more information, please visit www.MazorRobotics.com.
About Mazor
Mazor Robotics (MZRTF
Loading... Loading...
) is dedicated to the development of innovative surgical guidance systems and complementary products that provide a safer surgical environment for patients, surgeons, and operating room staff. Mazor Robotics (MZRTF
Loading... Loading...
)' systems have been successfully used in the placement of tens of thousands of implants in the United States and Europe.
1. Kantelhardt SR, Martinez R, Baerwinkel S, Burger R, Giese A, Rohde V. Perioperative course and accuracy of screw positioning in conventional, open robotic-guided and percutaneous robotic-guided, pedicle screw placement.
Eur Spine J. 2011;20(6):860-868.
Contact: Stephani Newman
Marketing Communications Manager
Mazor Robotics (MZRTF
Loading... Loading...
), Inc.
S.Newman@MazorRobotics-US.com
1 (800) 80 – MAZOR
SOURCE Mazor Robotics (MZRTF)
On November 15, 2012 the Company entered into a consulting agreement with Investor Awareness, Inc. (“InvA”) to provide financial public
relations services for a period of twelve months starting November 15, 2012. The compensation to InvA is $4,000 per month for the first three
months and $5,000 per month thereafter plus 60,000 restricted shares of our common stock for each 3 month period, beginning November 15,
2012. We issued 60,000 shares of our common stock on November 15, 2012 valued at $2,400, the fair market value, based on quoted trading
price on the date of issuance and is being accounted for in accordance with ASC 505-50. This agreement can be terminated with a 30 day notice
after six months.
Cassandra Oil, the first batch of oil produced
Home » Press » Press Releases »Cassandra Oil, the first ...
2012-12-21
The first movement of oil from tires manufactured
Two new patent applications filed in Sweden and the U.S.
The management team is strengthened with Bo-Göran Ulfberg
The first movement of oil from tires manufactured
As part of the startup phase has a first set of oil from the tires produced in Cassandra Oils process plant model CASO 600th The results will be analyzed in the company's laboratory and a basis for further work on the tuning of the control system.
Two new patent applications filed in Sweden and the U.S.
Cassandra Oil has filed two additional patent applications with both device requirements methodology requirements. Patent applications covering a total of 94 head and the requirements and submitted separately in Sweden and USA.
The management team is strengthened with Bo-Göran Ulfberg
Bo-Göran Ulfberg, former CEO of Volvo Construction Equipment Component AB and an honorary doctorate at Mälardalen University, has been hired as a consultant to work with management responsible for the construction of a production on a complete process plant per week starting in 2014.
"Thursday, December 20, 2012 was written a new chapter in Swedish industrial history when we produced the first batch of oil from car tires. I am very satisfied with the development of Cassandra Oil in 2012 and what we have achieved in a relatively short time. 2013 promises to be a busy but exciting year in which we will focus on building a production that can meet market demands and expectations. I am grateful that we managed to tie Bo-Göran Ulfberg to Cassandra Oil to help us with this. Finally, we want to Cassandra Oil to take this opportunity and wish you Merry Christmas and Happy New Year "says Cassandra Oil's founder Anders Olsson.
For further information, please contact
By Laine, MD
tel: +46 76 830 00 99
Erik Nerpin, Chairman
+46 70 620 73 59
It stopped trading one or two years ago.
Thanks for the quick replies. I'll check it out while we await news from SIAF>
What is Cassandra?
Thanks.
Mazor Robotics’ Receives Approval to Market its Renaissance Technology in Taiwan
CAESAREA, Israel – January 31, 2013 – Mazor Robotics Ltd. (TASE: MZOR), a developer of innovative surgical robots and complementary products, today announced the Company received approval to market its Renaissance™ system in Taiwan. Pinnaclemed Co., Ltd. will distribute and market the Renaissance technology in the country on behalf of Mazor.
Mazor is marketing its Renaissance technology with its distribution partners in the Asia Pacific region in several countries, including Japan, China, Korea, India, Singapore, Vietnam, and Australia.
“As part of our strategic global growth strategy, we are pleased to build on the base we have established in Asia,” stated Ori Hadomi, CEO. “We made great inroads into the Asia Pacific region in 2012 and believe it offers strong growth opportunities for Mazor in the coming years. We are excited to partner with local distributors to bring our innovative technology to patients and hospitals in Taiwan.”
Renaissance, Mazor Robotics’ next generation surgical guidance system for spine procedures, is transforming spine surgery from freehand operations to highly-accurate, state-of-the-art procedures, with less radiation – even for minimally invasive surgery, scoliosis, and other complex spinal deformity cases. It is the only robotic technology for spine surgery available in the marketplace.
About Mazor
Mazor Robotics (TASE:MZOR) is dedicated to the development and marketing of innovative surgical robots and complementary products that provide a safer surgical environment for patients, surgeons, and operating room staff. Mazor Robotics’ flagship product, Renaissance™, is a state-of-the-art surgical robotic system that enables surgeons to conduct spine surgeries in an accurate and secure manner. Mazor Robotics systems have been successfully used in the placement of over 35,000 implants in the United States and Europe. Numerous peer-reviewed publications and presentations at leading scientific conferences have validated the accuracy, usability, and clinical advantages of Mazor Robotics technology. For more information, please visit www.mazorrobotics.com.
U.S. Contacts: EVC Group
Aimee Gordon/Robert Jones-- Investors
agordon@evcgroup.com/bjones@evcgroup.com"> agordon@evcgroup.com/bjones@evcgroup.com
212/850-6020; 646/201-5447
Chris Gale—Media
Cgale@evcgroup.com"> Cgale@evcgroup.com
646/201-5431
Mazor Robotics Announces First Brain Cases Using Its Robotic Platform
Mazor expands clinically validated technology from spine into guided brain operations
CAESAREA, Israel--(BUSINESS WIRE)--Mazor Robotics Ltd. (TASE: MZOR), a developer of innovative surgical robots and complementary products, today announced the successful completion of the first robot-guided brain surgical procedures, which were performed with Mazor Robotics’ technology. Neurosurgeons Dr. In-Se Kim and Prof. Robert Schönmayr performed the first three cases at HSK Hospital, (Horst Schmidt Kliniken GmbH) in Wiesbaden, Germany.
“While our core is spine surgery, we are thrilled that our technology can be expanded to improve other surgical procedures”
“As one of the first medical centers globally to adopt robotic technology for spine surgeries, we are very proud to also be the first to expand its use to brain surgeries,” said Prof. Schönmayr.
“We see great potential in the application of robotic technology to brain and spine surgeries. Our patients have been the best testament to its clinical success,” added Dr. Kim.
In addition to its proven applications in spine surgeries, Mazor Robotics’ technology is applicable in the brain for biopsies, shunt placements and neurostimulation electrode placement such as for deep brain stimulation (DBS). As a frameless treatment solution for brain procedures, the robot’s precision, simplicity and safety profile have the potential to increase patient comfort, improve surgical accuracy and provide a less invasive approach, as well as potentially increase utilization of the installed base.
There are about 25,000 brain biopsies in the United States each year. The DBS placement market is estimated to be several hundred million dollars annually.
“While our core is spine surgery, we are thrilled that our technology can be expanded to improve other surgical procedures,” said Ori Hadomi, CEO of Mazor Robotics. “Brain surgeries represent a large market opportunity that is aligned with our current focus on spine. Approximately half of surgeons who currently use Mazor’s Renaissance and SpineAssist robots for spinal surgeries are neurosurgeons, the call point for brain surgery. By offering a spine surgery and brain surgery solution, we provide a solution for a greater number of physicians in the typical neurosurgery department.”
Regulatory clearance for the brain application is pending in the U.S. and Europe. Upon regulatory clearance, the brain application will be available as an add-on to Mazor’s Renaissance system at a separate price point expected early 2013.
About Mazor Robotics
Mazor Robotics Ltd (TASE: MZOR) is dedicated to the development and marketing of innovative surgical robots and complementary products that provide a safer surgical environment for patients, surgeons, and operating room staff. Mazor Robotics’ flagship product, Renaissance™, is a state-of-the-art surgical guidance system that enables surgeons to conduct spine surgeries in an accurate and secure manner. Mazor Robotics systems have been successfully used in the placement of over 20,000 implants in the United States and Europe. Numerous peer-reviewed publications and presentations at leading scientific conferences have validated the accuracy, usability, and clinical advantages of Mazor Robotics technology. For more information, visit www.mazorrobotics.com.
Contacts
U.S.:
EVC Group
Greg Gin/Doug Sherk, 646-445-4801 (Investors)
ggin@evcgroup.com / dsherk@evcgroup.com
Steve DiMattia, 646-201-5445 (Media)
sdimattia@evcgroup.com
Mazor Robotics Announces Foundation Surgical Hospital of San Antonio Purchases its Renaissance System
CAESAREA, Israel – December 30, 2012 – Mazor Robotics Ltd. (TASE: MZOR), a developer of innovative surgical robots and complementary products, today announced that Foundation Surgical Hospital (FSH) of San Antonio, Texas purchased its Renaissance™ system. This system sale marks the fifth Renaissance installation in the state of Texas and the 20th U.S. installation.
Foundation Surgical Hospital of San Antonio is a 20 private suite facility that offers numerous surgical procedures and medical services. FSH of San Antonio is an associated facility of Foundation Surgical Hospital Affiliates (FSHA), a healthcare management and development company that partners with physicians to develop and operate surgical hospitals. FSHA manages four affiliate hospitals in Texas, including FSA of San Antonio.
“I'm thrilled to be working with Mazor and honored to be the first surgeon to bring robotic spine surgery to San Antonio,” said Michael Leonard, MD, Executive Director of the Alamo Neurosurgical Institute. “As a neurosurgeon, I truly appreciate the benefits of an innovative technology that allows me to perform surgery with more precision, accuracy and less risk. This technology is the wave of the future, and I'm excited about being on the forefront of its introduction to the spine surgery community in San Antonio.”
“We are excited to work with Foundation Surgical Hospital Affiliates, bringing our Renaissance system to another outstanding facility in Texas,” stated Ori Hadomi, CEO of Mazor. “FSH of San Antonio is well known for adopting the latest advancements in neurological and spinal surgery, and we are looking forward to working closely with Dr. Leonard in utilizing the Renaissance technology in his spinal surgical practice.”
Renaissance, Mazor Robotics’ next generation surgical guidance system for spine procedures, is transforming spine surgery from freehand operations to highly-accurate, state-of-the-art procedures, with less radiation – even for minimally invasive surgery, scoliosis, and other complex spinal deformity cases. It is the only robotic technology for spine surgery available in the marketplace.
About Mazor
Mazor Robotics (TASE:MZOR) is dedicated to the development and marketing of innovative surgical robots and complementary products that provide a safer surgical environment for patients, surgeons, and operating room staff. Mazor Robotics’ flagship product, Renaissance™, is a state-of-the-art surgical robotic system that enables surgeons to conduct spine surgeries in an accurate and secure manner. Mazor Robotics systems have been successfully used in the placement of over 35,000 implants in the United States and Europe. Numerous peer-reviewed publications and presentations at leading scientific conferences have validated the accuracy, usability, and clinical advantages of Mazor Robotics technology. For more information, please visit www.mazorrobotics.com.
U.S. Contacts: EVC Group
Aimee Gordon/Robert Jones-- Investors
agordon@evcgroup.com/bjones@evcgroup.com"> agordon@evcgroup.com/bjones@evcgroup.com
646/445-4800; 646/201-5447
Chris Gale—Media
Cgale@evcgroup.com"> Cgale@evcgroup.com
646/201-5431
Mazor Robotics’ Receives Approval to Market its Renaissance Technology in Taiwan
CAESAREA, Israel – January 31, 2013 – Mazor Robotics Ltd. (TASE: MZOR), a developer of innovative surgical robots and complementary products, today announced the Company received approval to market its Renaissance™ system in Taiwan. Pinnaclemed Co., Ltd. will distribute and market the Renaissance technology in the country on behalf of Mazor.
Mazor is marketing its Renaissance technology with its distribution partners in the Asia Pacific region in several countries, including Japan, China, Korea, India, Singapore, Vietnam, and Australia.
“As part of our strategic global growth strategy, we are pleased to build on the base we have established in Asia,” stated Ori Hadomi, CEO. “We made great inroads into the Asia Pacific region in 2012 and believe it offers strong growth opportunities for Mazor in the coming years. We are excited to partner with local distributors to bring our innovative technology to patients and hospitals in Taiwan.”
Renaissance, Mazor Robotics’ next generation surgical guidance system for spine procedures, is transforming spine surgery from freehand operations to highly-accurate, state-of-the-art procedures, with less radiation – even for minimally invasive surgery, scoliosis, and other complex spinal deformity cases. It is the only robotic technology for spine surgery available in the marketplace.
About Mazor
Mazor Robotics (TASE:MZOR) is dedicated to the development and marketing of innovative surgical robots and complementary products that provide a safer surgical environment for patients, surgeons, and operating room staff. Mazor Robotics’ flagship product, Renaissance™, is a state-of-the-art surgical robotic system that enables surgeons to conduct spine surgeries in an accurate and secure manner. Mazor Robotics systems have been successfully used in the placement of over 35,000 implants in the United States and Europe. Numerous peer-reviewed publications and presentations at leading scientific conferences have validated the accuracy, usability, and clinical advantages of Mazor Robotics technology. For more information, please visit www.mazorrobotics.com.
U.S. Contacts: EVC Group
Aimee Gordon/Robert Jones-- Investors
agordon@evcgroup.com/bjones@evcgroup.com"> agordon@evcgroup.com/bjones@evcgroup.com
212/850-6020; 646/201-5447
Chris Gale—Media
Cgale@evcgroup.com"> Cgale@evcgroup.com
646/201-5431
Mazor Robotics’ Renaissance Technology Receives Health Canada License
CAESAREA, Israel – January 28, 2013 – Mazor Robotics Ltd. (TASE: MZOR), a developer of innovative surgical robots and complementary products, today announced the Company received its Health Canada (HC) Medical Device License to market its Renaissance system and accompanying accessories in Canada.
The HC license encompasses Renaissance use in both spine and brain applications, subject to specifications outlined in the clearance documents. The company plans to begin marketing the Renaissance technology through distributor partnerships in 2013.
“The receipt of the HC license is an important step in securing our foothold in North America,” stated Ori Hadomi, CEO. “We made significant progress expanding in the U.S. in 2012, and we have begun 2013 with the intent to further our growth and bring our innovative technology to new markets. Canada is a key geography for spine and brain applications, and we are excited to provide our Renaissance technology to the patients of Canada.”
Renaissance, Mazor Robotics’ next generation surgical guidance system for spine procedures, is transforming spine surgery from freehand operations to highly-accurate, state-of-the-art procedures, with less radiation – even for minimally invasive surgery, scoliosis, and other complex spinal deformity cases. It is the only robotic technology for spine surgery available in the marketplace.
About Mazor
Mazor Robotics (TASE:MZOR) is dedicated to the development and marketing of innovative surgical robots and complementary products that provide a safer surgical environment for patients, surgeons, and operating room staff. Mazor Robotics’ flagship product, Renaissance™, is a state-of-the-art surgical robotic system that enables surgeons to conduct spine surgeries in an accurate and secure manner. Mazor Robotics systems have been successfully used in the placement of over 35,000 implants in the United States and Europe. Numerous peer-reviewed publications and presentations at leading scientific conferences have validated the accuracy, usability, and clinical advantages of Mazor Robotics technology. For more information, please visit www.mazorrobotics.com.
U.S. Contacts: EVC Group
Aimee Gordon/Robert Jones-- Investors
agordon@evcgroup.com/bjones
212/850-6020; 646/201-5447
Chris Gale—Media
Cgale@evcgroup.com
646/201-5431
A yet undiscovered Israeli company the just might be the next Intuitive Surgical.
Everyone cross your fingers and welcome aboard.
I really like your idea of GE getting involved a lot more than my fear of the Chinese.
Only time will tell. But it should soon get very exciting around here.
In my opinion, management has caught wind of something substantial in the wind.
As an American I would hate to see the Chinese grab this technology right out from under our noses while our own government bumbles away the ownership of a major breakthrough all in the name of politics.
The Chinese were already aggressive enough to roll out the welcome mat to Natcore Management when they first learned of this technology.
An offer of $5 or $10 right now just might get them ownership at an absolute giveaway price.
Shareholders Rights Plan to be Renewed at
Natcore Technology Annual General Meeting
Red Bank, NJ — (January 22, 2013) —Natcore Technology Inc. (TSX-V: NXT; NTCXF.PK) advises that, subject to shareholder approval at the Annual General Meeting to be tentatively scheduled in early June 2013 and the approval of the TSX Venture Exchange, its shareholders Rights Plan will be renewed. The Rights Plan is designed to encourage the fair treatment of shareholders in the event of any take-over offer for Natcore. The Rights Plan will provide the Board and the shareholders with more time than the 35 days provided by statute to fully consider any unsolicited take-over bid for the company without undue pressure, and allow the Board to pursue, if appropriate, other alternatives to maximize shareholder value and to allow additional time for competing bids to emerge.
As previously disclosed, under the Rights Plan, a bidder making a Permitted Bid (as defined in the Rights Plan) for Natcore’s common shares may not take up any shares before the close of business on the 60th day after the date of the bid and unless at least 50% of the company's common shares not beneficially owned by the person making the bid and certain related parties are deposited, in which case the bid must be extended for 10 business days on the same terms to allow other shareholders to deposit to the bid. The Rights Plan will encourage an offeror to proceed by way of Permitted Bid or to approach the Board with a view to negotiation by creating the potential for substantial dilution of the offeror's position if a non-Permitted Bid is attempted. The Permitted Bid provisions of the Rights Plan are designed to ensure that, in any take-over bid, all shareholders are treated equally, receive the maximum available value for their investment and are given adequate time to properly assess the bid on a fully informed basis.
The Rights Plan is not being renewed in response to, or in anticipation of, any acquisition or take-over offer and is not intended to prevent a take-over of Natcore, to secure continuance of current management or the directors in office or to deter fair offers for the common shares of the company. The Rights Plan does not affect in any way the financial condition of Natcore. The initial issuance of the rights pursuant to the Rights Plan is not dilutive and will not affect reported earnings per share or cash flow per share until the rights separate from the underlying common shares and become exercisable.
The renewal of the Rights Plan is subject to the approval of TSX Venture Exchange and the approval of the shareholders. Shareholders should refer to the Information Circular for the Annual General Meeting when available for further details.
# # # # #
This press release does not constitute an offer to sell or a solicitation to buy any of the securities in the United States. The securities have not been and will not be registered under the United States Securities Act of 1933, as amended (“the U.S. Securities Act”) or any state securities law and may not be offered or sold in the United States or to U.S. Persons unless registered under the U.S. Securities Act and applicable state securities laws or an exemption from such registration is available.
Statements in this press release other than purely historical factual information, including statements relating to revenues or profits, or the Company’s future plans and objectives, or expected sales, cash flows, and capital expenditures constitute forward-looking statements. Forward-looking statements are based on numerous assumptions and are subject to all of the risks and uncertainties inherent in the Company’s business, including risks inherent in the technology history. There can be no assurance that such forward-looking statements will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. Accordingly, readers should not place undue reliance on such statements. Except in accordance with applicable securities laws, the Company expressly disclaims any obligation to update any forward-looking statements or forward-looking statements that are incorporated by reference herein.
Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
Agreed on all counts. As soon as I read this I bought some more.
Management Discussion and Update - 12/19/12
https://www.otciq.com/otciq/ajax/showFinancialReportById.pdf?id=97034
You're right. This is a real blue-ribbon company that's gone practically unknown. Ownership was and remains vastly institutional.
I also like the sound of Gold Royalties. Thanks for the tip. I may take a roll of the dice on that one as a compliment to my investment in FNV.
It would be greatly appreciated if someone might suggest the effect of high frequency trading on HDY shares.
Mouse Suggestion:
If it's a remote mouse (no cord attaching it) replace the battery in it. You can see if the remote mouse battery is bad by looking at the underside and seeing if it's lighted.
Trading in Canada is halted. These UURAF trades are on the NASDAQ.
By Martinne Geller
NEW YORK | Tue Sep 25, 2012 11:04am EDT
(Reuters) - Coca-Cola Co plans to deliver and operate water purification systems in rural parts of the developing world, working with the inventor of the Segway transportation device in a project that will also help further Coke's sustainability targets.
The world's largest soft drink maker said on Tuesday that it is teaming up with American inventor Dean Kamen to roll out his new invention, called the Slingshot, to bring clean water to areas where it is limited.
Kamen, whose organization is called Deka R&D, has made many inventions in the medical device field but is best-known for his Segway personal transporter. He also worked with Coke on its Freestyle fountain dispenser.
Kamen expects to deliver 30 Slingshot machines to Coke by the end of 2012. Next year, Coke will place machines in rural areas of South Africa, Mexico and Paraguay, in places like schools, health clinics and community centers.
By 2014, the distribution should widen to include thousands of units, and later to extend to India, the Middle East and Asia.
"For us to partner with Deka and embark on a project with huge societal implications gives me huge excitement," Coke Chief Executive Muhtar Kent told Reuters. "And it fits perfectly with our other sustainability pillars, such as our goal for water neutrality."
As part of Kent's "2020 Vision" Coca-Cola has committed to replenish 100 percent of the water used in its drinks and their production. Through 386 water projects in 94 countries, the company is 35 percent of the way toward the goal.
The Slingshot uses a vapor compression distillation system that runs on very low levels of electricity. Through boiling and evaporation, the system can clean and purify anything from ocean water to raw sewage, Kamen and Coke said. One Slingshot unit can purify up to 300,000 liters of water a year, or enough daily drinking water for about 300 people, Kamen said.
Coke declined to quantify its financial investment, but Kent said the company would dedicate "whatever funds are necessary" to make the project meaningful. Still, significant investments in time and effort by Coke and its local bottlers will translate to millions of dollars, Kent said.
"It is not a small project," he added.
Lack of access to clean water can lead to diseases including diarrhea, the second-leading cause of death in children under five years old, according to data from the World Heath Organization.
Kamen, who has developed insulin pumps, said that giving everyone access to clean water would be a major contribution to preventing such diseases.
"Talk about low-hanging fruit," Kamen said in an interview.
He said he reached out to Coca-Cola for its vast distribution network and ability to deliver small products everywhere.
Kent said he envisions the Slingshots, which each weigh about 200 pounds and can fit in the back of a truck, being placed in kiosks that will run on solar power or biofuel and could provide rural communities with other benefits, such as refrigerated vaccines, mobile-device charging stations and entrepreneurial opportunities for women.
Last year, Coke and Kamen's organization conducted a field trial of the Slingshot, testing it at five schools outside Accra, Ghana.
(Editing by Matthew Lewis)
Anyone just happening upon Carlyle... look closely. You've discovered where many world leaders have invested their fortunes, their insights and their skills. Nowhere else will you find the variety of massive projects and enterprises joined together by a single investment group. This outfit has been private and exclusive for many years. But now we little guys have the chance to own a small piece of it.
Regarding this special series F stock:
If one was naked short SIAF shares, is there anything that would force me to cover my position by the record date (9/28?)
Updated Note to Fidelity Shareholders:
Fidelity called me back to confirm that Fidelity now agrees to handle the special dividend paperwork for all clients.
I have requested written confirmation and will repost upon receipt of such paperwork.
Note to shareholders with Fidelity accounts:
I just checked with my Fidelity rep.
Fidelity will only handle the special dividend paperwork for clients whose accounts are managed by Fidelity.
Clients like me who self-manage their accounts must handle their own paperwork.
By the way, I really doubt that Fidelity would include SIAF shares in any accounts that they manage.
Mike, would you mind letting us know what brokerage house you use?
Thanks.
Mobile payments startup Square has announced an extensive partnership with Starbucks
By Devindra Hardawar at VentureBeat
Wed Aug 8, 2012 1:49am EDT
In surprising news tonight, mobile payments startup Square has announced an extensive partnership with Starbucks. Among the terms of the partnership, Square will power Starbucks’ credit and debit card payments nationwide, and Starbucks will invest $25 million in the startup as part of its fourth round of funding.
Additionally, Starbucks president and CEO Howard Schultz will join Square’s board, and Starbucks will accept Pay with Square across the nation later this year (which will let you pay for orders directly from your phone; don’t expect to see the iconic Square card readers).
The Square Directory will also see a tremendous boost from the deal: The directory within the Pay with Square app will list nearby Starbucks locations (and will alert Starbucks customers of Square-equipped businesses), and Starbucks will eventually integrate the directory into its digital services, including its already popular mobile app.
The news has tremendous implications for Square, since it’s the company’s first major partnership with a national chain. Square has sold itself as the best solution for individuals and small businesses to take credit card payments, but if it can power a massive enterprise like Starbucks, it’s clear that the company’s ambitions lay far beyond hipster tag sales.
San Francisco, Calif.-based Square has raised $141 million so far and is rumored to be working on a massive $200 million round, which would value it at $3.25 billion. Starbucks’ large investment today definitely points to something major happening in Square’s next round.
Square CEO and founder Jack Dorsey sent along the following e-mail to the company’s customers tonight:
I am pleased and proud to announce that today Starbucks signed up for Square.
Square began with a really simple idea: everyone should be able to accept credit cards. It should be easy and free to get set up, it should use simple technology people already own, and, most importantly, it should instantly adapt to any size business—from the person chasing a dream to the largest organization on the planet. By embracing Square, Starbucks has validated these ideas as powerful tools—not just for small businesses, but for smart businesses.
It’s amazing to think that Starbucks began as a single coffee shop in Seattle. The concept of taking a good idea and helping it grow is not foreign to them, and Starbucks doesn’t just view Square as the simplest way to accept payments. They see an opportunity to extend and accelerate a model they grew up with: the idea that business is local and that community plays a vital role in job creation and economic vitality. When Starbucks builds the Square Directory into their apps and in-store Digital Network, it gives Square new visibility, driving more customers to opt-in to Square. And with nearly 7,000 Starbucks stores soon accepting Square, these new payers will be able to find your business (including coffeehouses) and pay with their name, building community and creating value.
Our customers make us who we are, and we are proud of every single one of you—including our newest. Our promise to you remains the same: build simple, affordable, and fast tools that level the playing field for everyone. Thank you for helping us build Square. And please share your thoughts and tweets; I’m listening.
As Howard Schultz says: #Onward
Jack Dorsey, CEO
true... markets tend to be quite slow on Saturdays.
But maybe with all we've heard, today will be what we're all waiting for.
Assuming the acquisition of Corewafer completes this quarter, when must the Audited financials and S-1 filing take place? By 6/30? Or is it when this quarter's results are due, 8/15?
You might try asking your broker if he will buy you out of your position for $0.01. Some brokers have the authority to do this. The only benefit to you is that you can then write off your loss.
Westport and Caterpillar Announce Agreement to Develop Natural Gas Technology for Off-Road Equipment
Print
Alert
Westport Innovations - Ordinary Shares (MM) (NASDAQ:WPRT)
Intraday Stock Chart
Today : Tuesday 5 June 2012
Click Here for more Westport Innovations - Ordinary Shares (MM) Charts.
Westport and Caterpillar Announce Agreement to Develop Natural Gas Technology for Off-Road Equipment The two companies are positioned to be the first to offer Westport™ HPDI technology in the high horsepower off-road market; initial focus on mining trucks and locomotives. Video Link for Caterpillar, EMD and Westport Executive Statements Included in Press Release.
PR Newswire
VANCOUVER, British Columbia, June 5, 2012
VANCOUVER, British Columbia, June 5, 2012 /PRNewswire/ -- Westport Innovations Inc. (TSX:WPT/NASDAQ:WPRT), a global leader in natural gas engines, has signed agreements with Caterpillar Inc. (NYSE: CAT) to co-develop natural gas technology for off-road equipment, including mining trucks and locomotives. Caterpillar and Westport will combine technologies and expertise, including Westport™ High Pressure Direct Injection (HPDI) technology and Caterpillar's industry leading off-road engine and machine product technology, to develop the natural gas fuel system. Caterpillar will fund the development program. When the products go to market, Westport expects to participate in the supply of key components.
"This is a significant opportunity that has the potential to transform important segments of the global off-road equipment industries," said David Demers, CEO of Westport Innovations. "We are working with the global leader in engines, locomotives and off-road equipment to develop an attractive natural gas offering for their customers. The substantial price difference between natural gas and diesel fuel is resulting in a strong financial incentive to enable off-road applications to take advantage of low natural gas energy costs without sacrificing operational performance. There is also a clear environmental incentive because of the reduced carbon emissions. Adding to the solid business case for this program is the potential to convert existing field units to natural gas – opening up a whole new market opportunity."
While the agreements initially focus on engines used in mining trucks and locomotives, the companies will also develop natural gas technology for Caterpillar's off-road engines, which are used in a variety of electric power, industrial, machine, marine and petroleum applications worldwide.
"This agreement does more than pair two leaders in their respective industries," said Steve Fisher, vice president of Caterpillar's Large Power Systems Division. "Many of our customers are asking for natural-gas powered equipment in order to reap the financial and environmental benefits. The program positions Caterpillar to become the first manufacturer to bring HPDI technology to the high horsepower off-road market, offer the broadest product line of natural gas-fueled machines and equipment, and capitalize on the attractiveness of natural gas as an alternate mobile fuel – all within the shortest time frame for our customers."
"This is a true win-win for our customers and the environment," said Billy Ainsworth, President and CEO of Electro-Motive Diesel, a subsidiary of Progress Rail Services, which will develop the natural gas-powered locomotives. "As a part of Caterpillar, we have the ability to be on the forefront of developing cutting-edge solutions for our industry, and we look forward to continuing those advancements for years to come."
Development programs will start immediately for both new and existing engines, combustion technology and fuel systems. Commercial production is expected to begin in about five years.
Video Link for Executive Statements: www.caterpillar.com
David Demers, CEO, Westport InnovationsSteve Fisher, Vice President of Caterpillar's Large Power Systems DivisionBilly Ainsworth, President and CEO of Electro-Motive Diesel, a subsidiary of Progress Rail Services
About Caterpillar:
For more than 85 years, Caterpillar Inc. has been making sustainable progress possible and driving positive change on every continent. With 2011 sales and revenues of $60.138 billion, Caterpillar is the world's leading manufacturer of construction and mining equipment, diesel and natural gas engines, industrial gas turbines and diesel-electric locomotives. The company also is a leading services provider through Caterpillar Financial Services, Caterpillar Remanufacturing Services, Caterpillar Logistics Services and Progress Rail Services. More information is available at: http://www.caterpillar.com.
About EMD:
Founded in 1922, Electro-Motive Diesel, a subsidiary of Progress Rail Services, a Caterpillar Company, is an original equipment manufacturer of diesel-electric locomotives. Headquartered in LaGrange, Illinois, with additional manufacturing facilities and business offices around the world, EMD designs, manufactures and sells diesel-electric locomotives for all commercial railroad applications and has sold its products in more than 70 countries worldwide. The Company is the only diesel-electric locomotive manufacturer to have produced more than 72,500 engines and has the largest installed base in both North America and worldwide. In addition to its manufacturing activities, EMD has an extensive aftermarket business offering customers replacement parts, maintenance solutions, and a range of value-added services. The Company is also a global provider of diesel engines for marine propulsion, offshore and land-based oil well drilling rigs, and stationary power generation. Additional information may be found at www.EMDiesels.com.
About Westport Innovations Inc.
Westport Innovations Inc. is a leading global supplier of proprietary solutions that allow engines to operate on clean-burning fuels such as compressed natural gas (CNG), liquefied natural gas (LNG), hydrogen, and renewable natural gas (RNG) fuels such as landfill gas and helps reduce greenhouse gas emissions (GHG). Westport technology offers advanced LNG fueling systems with direct injection natural gas engine technology for heavy-duty vehicles such as highway trucks and off-road applications such as mining and rail. Westport's joint venture with Cummins Inc., Cummins Westport Inc. designs, engineers and markets spark-ignited natural gas engines for North American transportation applications such as trucks and buses. Westport LD division is one of the global leaders for natural gas and liquefied petroleum gas (LPG) fuel in passenger cars, light-duty trucks and industrial applications such as forklifts. To learn more about our business, visit our website or subscribe to our RSS feed at www.westport.com, or follow us on Twitter @WestportDotCom.
Forward-Looking Statements
Certain statements in this press release relate to future events and expectations and are forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. Words such as "believe," "estimate," "will be," "will," "would," "expect," "anticipate," "plan," "project," "intend," "could," "should" or other similar words or expressions often identify forward-looking statements. All statements other than statements of historical fact are forward-looking statements, including, without limitation, statements regarding our outlook, projections, forecasts or trend descriptions. These statements do not guarantee future performance, and we do not undertake to update our forward-looking statements.
Caterpillar's actual results may differ materially from those described or implied in our forward-looking statements based on a number of factors, including, but not limited to: (i) global economic conditions and economic conditions in the industries and markets we serve; (ii) government monetary or fiscal policies and infrastructure spending; (iii) commodity or component price increases and/or limited availability of raw materials and component products, including steel; (iv) our and our customers', dealers' and suppliers' ability to access and manage liquidity; (v) political and economic risks and instability, including national or international conflicts and civil unrest; (vi) our and Cat Financial's ability to: maintain credit ratings, avoid material increases in borrowing costs, and access capital markets; (vii) the financial condition and credit worthiness of Cat Financial's customers; (viii) inability to realize expected benefits from acquisitions and divestitures, including the acquisition of Bucyrus International, Inc.; (ix) international trade and investment policies; (x) challenges related to Tier 4 emissions compliance; (xi) market acceptance of our products and services; (xii) changes in the competitive environment, including market share, pricing and geographic and product mix of sales; (xiii) successful implementation of capacity expansion projects, cost reduction initiatives and efficiency or productivity initiatives, including the Caterpillar Production System; (xiv) sourcing practices of our dealers or original equipment manufacturers; (xv) compliance with environmental laws and regulations; (xvi) alleged or actual violations of trade or anti-corruption laws and regulations; (xvii) additional tax expense or exposure; (xviii) currency fluctuations; (xix) our or Cat Financial's compliance with financial covenants; (xx) increased pension plan funding obligations; (xxi) union disputes or other employee relations issues; (xxii) significant legal proceedings, claims, lawsuits or investigations; (xxiii) compliance requirements imposed if carbon emissions legislation and/or regulations are adopted; (xxiv) changes in accounting standards; (xxv) failure or breach of IT security; (xxvi) adverse effects of natural disasters; and (xxvii) other factors described in more detail under "Item 1A. Risk Factors" in our Form 10-K filed with the SEC on February 21, 2012 for the year ended December 31, 2011. This filing is available on our website at www.caterpillar.com/secfilings.
SOURCE Caterpillar Inc.
Fidelity shows that 4000 shares just traded at $0.1149
Maybe it's surveys like this:
"The GE Capital Fleet Services’ survey of fleet managers was recently conducted at the 2012 NAFA Institute & Expo in St. Louis.
“Whether identifying ways to reduce maintenance spend or fine-tune vehicle replacement strategies, we continue to experience a high demand from customers on how best to optimize their fleets and drive out cost,” said Mark Hayes, chief marketing officer of GE Capital Fleet Services. “We specialize in working closely with customers to make them successful based on the demands of today’s business environment and the future goals of their organizations.”
According to the survey, in the next 12 months fifty-seven percent of fleet managers will have incorporated alternative fuel vehicles into their fleets. Fewer fleet managers than a year ago said they do not currently have plans to incorporate alternative fuel vehicles over the next 12 months (30 percent today down from 34 percent)."