Register for free to join our community of investors and share your ideas. You will also get access to streaming quotes, interactive charts, trades, portfolio, live options flow and more tools.
Register for free to join our community of investors and share your ideas. You will also get access to streaming quotes, interactive charts, trades, portfolio, live options flow and more tools.
Highly doubt it......don't know if we'll ever see 3's again either.
Market cap is under $250K....way undervalued.
Haha, you guys (or should that be singular?) are (is) ridiculous!!
Nice buy!
I think you must have the wrong company....
Looking forward to an update from the company!!
Go WDRP!
Anyone else think it was odd that 10M showed up on the bid, then 10M got traded at 0.0003 right after???
Thanks! I had been here before, but sold out for a little while. Had to come back though, I see a ton of potential here!
Got my order filled!! Thanks to the seller (he'll be kicking himself later IMO)...
Same here, got an order in for another 2.5M...
I think FEEL's overdue for a bounce, hope I can get some more 3's before it happens though.
I had been out for a couple months, bought back in yesterday at 0.0003.
A ton of potential here....market cap under $200k for a real company with products in stores...seems crazy low.
got a few million shares, will look to add more when funds become available.
Go FEEL!
Very nice volume on the bid side....Looking good, news could send us flying.
Anyone talk to IR lately?
Go WDRP!
Thinking about buying some startup shares....anyone have a more up to date O/S and float than what's in the iBox???
Anyone talk to IR or anyone else with the company lately???
I'll agree with that, but it's not sustainable until there is enough buying pressure to keep it moving. Until then, there's nothing wrong with helping hold bid support and picking up a few cheapies (by a few, I mean 18,000 not 200) in the meantime.
I'll definitely help slap the ask when we start moving up on good buying pressure (hopefully soon!).
I did get 200 shares filled at that price, but it's the person that keeps selling 200 shares right before close bringing us down. Didn't mean to get mad, just frustrated it happened again and that it happened to me when I thought I had an all or none order in...
I don't understand why you're blaming me for having a buy order in (which I thought was all or none) and someone selling 200 shares at the end of day to drop the price....Did you have any orders in today??? Ever hear of bid support?
Actually almost ten cents, 9.99 commission. They shouldn't allow trades under $50-100...
Definitely some B.S. there....
I was the big loser that got 200 shares @ 0.0441. I could've swore I put it in as an All of Nothing trade for 18,000 shares.
What a d*ck....oh well, can't hold us down too much longer.
Anyone talk to Andrew this week? Are we expecting anything soon?
eTrade's showing pre-market trades (5K and 15K) at 0.05???
eTrade's showing 35,000 @ 0.053 x 45,400 @ 0.055
I think you multiply those shnumbers by 100 to get the # of shares at that price, not sure though...
That is very encouraging, looks like no one is betting on WDRP to go below current levels....
Hopefully more news on the way this week?? Robert's meeting with Dave Myers? UL progress? Grants?
Go WDRP!
Can't be sure, but that's what it looked like....bid moving back up.
Looks like the dumb*ss that was selling today final got rid of his shares....congrats to whoever got the cheapies!
Go WDRP!
It'll be interesting to see the specifics of the plan. Should shake things up one way or another...
Good day guys....looking forward to the next PR!
It'll bounce back to .0012+ before EOD IMO...
Another green day....I think that's 7 in a row!
WDRP seems to like giving Thursday morning PR's, wonder if we have another one coming?
Go WDRP!
Good point....cancelled my order.
I've had an order in for the last two days at 0.0002 that still hasn't gotten filled. You'd think I would've gotten at least a partial fill with 125M @ 0.0002 today....might be for the best if it doesn't get filled at this point.
That doesn't make any sense....
They may R/S ENTI prior to the share distribution or R/S PTEL after, but I think that's their only option. AJIMO
WDRP continues to move north....multiday runner!
More news coming???
WDRP continues to move north....multiday runner!
More news coming???
WDRP continues to move north....multiday runner!
More news coming???
Nice buys coming in!
I think this would be a GREEN FLAG ;)
Go WDRP!!!
WDRP - Multiday run in the works, blue skies possible tomorrow!!!
Wanderport Completes "In House" Testing 4:00 PM ET 6/6/11 | Marketwire
Wanderport Corp. (PINKSHEETS: WDRP) is delighted to announce that "in house" testing for the prototyped single cavity microwave energy tank-less water (SCMHU) is now complete. The SCMHU was evaluated and confirms performance improvements were made possible by the new heat exchanger design. In addition, based on what was experienced by the engineering team, Wanderport can now validate the following:
View data
-- The unit demonstrated the capacity to heat water and that it will be
able to efficiently and economically reach temperatures greater than
regulations allow.
-- The company has every reason to believe that any final product
offering, incorporating this technology, will be highly competitive
and likely to offer "Best of Class" performance.
-- The unit demonstrated the capacity to heat water and that it will be able to efficiently and economically reach temperatures greater than regulations allow. -- The company has every reason to believe that any final product offering, incorporating this technology, will be highly competitive and likely to offer "Best of Class" performance.
"I have been working with Mr. Bruno Zoccali of Design 1st Inc. on the prototype/SCMHU and we've done multiple trial runs, enough to allow me to recommend that we send the unit to the third party laboratory (UL(R)), so that we can keep pushing this ahead," said Mr. Robert Simoneau, Wanderport Corporation's Technical Advisor and Product Licensor.
Mr. Zoccali firmly stated, "When you have a single cavity prototype unit that incorporates multiple fundamentals, each potentially lethal in their own right, the chosen procedure is to find a balance between satisfying our need to validate functionality with the obligation to act responsibly, while maintaining momentum towards a final product." Mr. Zoccali continued by saying, "As engineering partners, we agree that we need to better understand and implement any and all safety features as necessary and that Wanderport's decision to work with a leading testing lab will go a long way towards making this happen."
Figure (C)-Actual Chart (June 2011): The graph was derived from the latest of many tests using a 2 channel type K-thermometer/temperature data logger downloaded on to a desktop on SE305 version 3.3.0.0. This particular chart shows 2 cycles of operation and is both consistent and indicative of what has transpired while performing in-house tests for the last month or so. Please note that both X and Y numerical values have been deleted, as it is preferred that precise representation on these values is made with the assistance of an accredited third-party lab. A dashed black line was also inserted representing baseline temperature as an alternate path for T1. Deletions of numerical values and dashed line insertion were done via image altering software solely for the purpose of illustration and clarity.
Note that: T1 and T2 are equal for the first division on X plane. This is a period of stabilizing where thermocouples and water reach a steady plane. Half way through the second division, T1 decreases dramatically while T2 increases dramatically. This first event ends approximately mid-way through the third division.
The second event begins roughly at the beginning of the fourth division, ending mid-way through the fourth. These events correlate the activation of the SCMHU with thermocouples for T1 placed at the input of the heat exchanger located opposite the RF shielding bulkhead in the SCMHU and is subject to any stray microwave energy disturbance and therefore, not a true representation of the temperature getting colder but rather is the method by which this delicate and accurate piece of test equipment is representing the microwave energy at ambient. Therefore, the dashed black line is a more important and accurate representation of baseline temperature. It is imperative to note that thermocouples would never be placed in an operational unit but these sensors are required to be placed in these dangerous environments for the purpose of measuring any temperature, as well as to gather feedback and various parameters.
Figure (C) continued: In conclusion, it can be noted that T2, shown in red, is not subject to as much interference as T1 because the sensor is located in an area that is not exposed to microwave energy. T2 represents the temperature of the water leaving the SCMHU and is raised extremely rapidly from the dashed black line (T1). This temperature rise has been consistent throughout various test durations and leaves no doubt about the heating capabilities of the technology and unit and demonstrates the capacity to heat water efficiently and economically while eventually reaching temperatures greater than regulations allow.
"Based on these extraordinary results, I recommended working with UL(R) as a safety testing lab for reasons that are obvious but also for reasons that are not readily apparent. It is significant to note they are also a certification partner for recognized energy efficiency programs, such as ENERGY STAR(R) and also a recognized resource for EMC testing, including FCC, CE and Industry Canada. I intend on improving our knowledge base rapidly and in actively promoting the inclusion of all the necessary features that I expect would lead us to a fully approved product for commercialization as rapidly as possible," further stated Mr. Simoneau.
Important Notice: All figures in this news release are subject to change without prior notice and are officially filed by Wanderport Corporation (WDRP) on www.otcmarkets.com in "Supplemental Exhibit "H" by choosing the "Financials" tab.)
WDRP - Multiday run in the works, blue skies possible tomorrow!!!
Wanderport Completes "In House" Testing 4:00 PM ET 6/6/11 | Marketwire
Wanderport Corp. (PINKSHEETS: WDRP) is delighted to announce that "in house" testing for the prototyped single cavity microwave energy tank-less water (SCMHU) is now complete. The SCMHU was evaluated and confirms performance improvements were made possible by the new heat exchanger design. In addition, based on what was experienced by the engineering team, Wanderport can now validate the following:
View data
-- The unit demonstrated the capacity to heat water and that it will be
able to efficiently and economically reach temperatures greater than
regulations allow.
-- The company has every reason to believe that any final product
offering, incorporating this technology, will be highly competitive
and likely to offer "Best of Class" performance.
-- The unit demonstrated the capacity to heat water and that it will be able to efficiently and economically reach temperatures greater than regulations allow. -- The company has every reason to believe that any final product offering, incorporating this technology, will be highly competitive and likely to offer "Best of Class" performance.
"I have been working with Mr. Bruno Zoccali of Design 1st Inc. on the prototype/SCMHU and we've done multiple trial runs, enough to allow me to recommend that we send the unit to the third party laboratory (UL(R)), so that we can keep pushing this ahead," said Mr. Robert Simoneau, Wanderport Corporation's Technical Advisor and Product Licensor.
Mr. Zoccali firmly stated, "When you have a single cavity prototype unit that incorporates multiple fundamentals, each potentially lethal in their own right, the chosen procedure is to find a balance between satisfying our need to validate functionality with the obligation to act responsibly, while maintaining momentum towards a final product." Mr. Zoccali continued by saying, "As engineering partners, we agree that we need to better understand and implement any and all safety features as necessary and that Wanderport's decision to work with a leading testing lab will go a long way towards making this happen."
Figure (C)-Actual Chart (June 2011): The graph was derived from the latest of many tests using a 2 channel type K-thermometer/temperature data logger downloaded on to a desktop on SE305 version 3.3.0.0. This particular chart shows 2 cycles of operation and is both consistent and indicative of what has transpired while performing in-house tests for the last month or so. Please note that both X and Y numerical values have been deleted, as it is preferred that precise representation on these values is made with the assistance of an accredited third-party lab. A dashed black line was also inserted representing baseline temperature as an alternate path for T1. Deletions of numerical values and dashed line insertion were done via image altering software solely for the purpose of illustration and clarity.
Note that: T1 and T2 are equal for the first division on X plane. This is a period of stabilizing where thermocouples and water reach a steady plane. Half way through the second division, T1 decreases dramatically while T2 increases dramatically. This first event ends approximately mid-way through the third division.
The second event begins roughly at the beginning of the fourth division, ending mid-way through the fourth. These events correlate the activation of the SCMHU with thermocouples for T1 placed at the input of the heat exchanger located opposite the RF shielding bulkhead in the SCMHU and is subject to any stray microwave energy disturbance and therefore, not a true representation of the temperature getting colder but rather is the method by which this delicate and accurate piece of test equipment is representing the microwave energy at ambient. Therefore, the dashed black line is a more important and accurate representation of baseline temperature. It is imperative to note that thermocouples would never be placed in an operational unit but these sensors are required to be placed in these dangerous environments for the purpose of measuring any temperature, as well as to gather feedback and various parameters.
Figure (C) continued: In conclusion, it can be noted that T2, shown in red, is not subject to as much interference as T1 because the sensor is located in an area that is not exposed to microwave energy. T2 represents the temperature of the water leaving the SCMHU and is raised extremely rapidly from the dashed black line (T1). This temperature rise has been consistent throughout various test durations and leaves no doubt about the heating capabilities of the technology and unit and demonstrates the capacity to heat water efficiently and economically while eventually reaching temperatures greater than regulations allow.
"Based on these extraordinary results, I recommended working with UL(R) as a safety testing lab for reasons that are obvious but also for reasons that are not readily apparent. It is significant to note they are also a certification partner for recognized energy efficiency programs, such as ENERGY STAR(R) and also a recognized resource for EMC testing, including FCC, CE and Industry Canada. I intend on improving our knowledge base rapidly and in actively promoting the inclusion of all the necessary features that I expect would lead us to a fully approved product for commercialization as rapidly as possible," further stated Mr. Simoneau.
Important Notice: All figures in this news release are subject to change without prior notice and are officially filed by Wanderport Corporation (WDRP) on www.otcmarkets.com in "Supplemental Exhibit "H" by choosing the "Financials" tab.)
WDRP - Multiday run in the works, blue skies possible tomorrow!!!
Wanderport Completes "In House" Testing 4:00 PM ET 6/6/11 | Marketwire
Wanderport Corp. (PINKSHEETS: WDRP) is delighted to announce that "in house" testing for the prototyped single cavity microwave energy tank-less water (SCMHU) is now complete. The SCMHU was evaluated and confirms performance improvements were made possible by the new heat exchanger design. In addition, based on what was experienced by the engineering team, Wanderport can now validate the following:
View data
-- The unit demonstrated the capacity to heat water and that it will be
able to efficiently and economically reach temperatures greater than
regulations allow.
-- The company has every reason to believe that any final product
offering, incorporating this technology, will be highly competitive
and likely to offer "Best of Class" performance.
-- The unit demonstrated the capacity to heat water and that it will be able to efficiently and economically reach temperatures greater than regulations allow. -- The company has every reason to believe that any final product offering, incorporating this technology, will be highly competitive and likely to offer "Best of Class" performance.
"I have been working with Mr. Bruno Zoccali of Design 1st Inc. on the prototype/SCMHU and we've done multiple trial runs, enough to allow me to recommend that we send the unit to the third party laboratory (UL(R)), so that we can keep pushing this ahead," said Mr. Robert Simoneau, Wanderport Corporation's Technical Advisor and Product Licensor.
Mr. Zoccali firmly stated, "When you have a single cavity prototype unit that incorporates multiple fundamentals, each potentially lethal in their own right, the chosen procedure is to find a balance between satisfying our need to validate functionality with the obligation to act responsibly, while maintaining momentum towards a final product." Mr. Zoccali continued by saying, "As engineering partners, we agree that we need to better understand and implement any and all safety features as necessary and that Wanderport's decision to work with a leading testing lab will go a long way towards making this happen."
Figure (C)-Actual Chart (June 2011): The graph was derived from the latest of many tests using a 2 channel type K-thermometer/temperature data logger downloaded on to a desktop on SE305 version 3.3.0.0. This particular chart shows 2 cycles of operation and is both consistent and indicative of what has transpired while performing in-house tests for the last month or so. Please note that both X and Y numerical values have been deleted, as it is preferred that precise representation on these values is made with the assistance of an accredited third-party lab. A dashed black line was also inserted representing baseline temperature as an alternate path for T1. Deletions of numerical values and dashed line insertion were done via image altering software solely for the purpose of illustration and clarity.
Note that: T1 and T2 are equal for the first division on X plane. This is a period of stabilizing where thermocouples and water reach a steady plane. Half way through the second division, T1 decreases dramatically while T2 increases dramatically. This first event ends approximately mid-way through the third division.
The second event begins roughly at the beginning of the fourth division, ending mid-way through the fourth. These events correlate the activation of the SCMHU with thermocouples for T1 placed at the input of the heat exchanger located opposite the RF shielding bulkhead in the SCMHU and is subject to any stray microwave energy disturbance and therefore, not a true representation of the temperature getting colder but rather is the method by which this delicate and accurate piece of test equipment is representing the microwave energy at ambient. Therefore, the dashed black line is a more important and accurate representation of baseline temperature. It is imperative to note that thermocouples would never be placed in an operational unit but these sensors are required to be placed in these dangerous environments for the purpose of measuring any temperature, as well as to gather feedback and various parameters.
Figure (C) continued: In conclusion, it can be noted that T2, shown in red, is not subject to as much interference as T1 because the sensor is located in an area that is not exposed to microwave energy. T2 represents the temperature of the water leaving the SCMHU and is raised extremely rapidly from the dashed black line (T1). This temperature rise has been consistent throughout various test durations and leaves no doubt about the heating capabilities of the technology and unit and demonstrates the capacity to heat water efficiently and economically while eventually reaching temperatures greater than regulations allow.
"Based on these extraordinary results, I recommended working with UL(R) as a safety testing lab for reasons that are obvious but also for reasons that are not readily apparent. It is significant to note they are also a certification partner for recognized energy efficiency programs, such as ENERGY STAR(R) and also a recognized resource for EMC testing, including FCC, CE and Industry Canada. I intend on improving our knowledge base rapidly and in actively promoting the inclusion of all the necessary features that I expect would lead us to a fully approved product for commercialization as rapidly as possible," further stated Mr. Simoneau.
Important Notice: All figures in this news release are subject to change without prior notice and are officially filed by Wanderport Corporation (WDRP) on www.otcmarkets.com in "Supplemental Exhibit "H" by choosing the "Financials" tab.)
WDRP - Multiday run in the works, blue skies possible tomorrow!!!
Wanderport Completes "In House" Testing 4:00 PM ET 6/6/11 | Marketwire
Wanderport Corp. (PINKSHEETS: WDRP) is delighted to announce that "in house" testing for the prototyped single cavity microwave energy tank-less water (SCMHU) is now complete. The SCMHU was evaluated and confirms performance improvements were made possible by the new heat exchanger design. In addition, based on what was experienced by the engineering team, Wanderport can now validate the following:
View data
-- The unit demonstrated the capacity to heat water and that it will be
able to efficiently and economically reach temperatures greater than
regulations allow.
-- The company has every reason to believe that any final product
offering, incorporating this technology, will be highly competitive
and likely to offer "Best of Class" performance.
-- The unit demonstrated the capacity to heat water and that it will be able to efficiently and economically reach temperatures greater than regulations allow. -- The company has every reason to believe that any final product offering, incorporating this technology, will be highly competitive and likely to offer "Best of Class" performance.
"I have been working with Mr. Bruno Zoccali of Design 1st Inc. on the prototype/SCMHU and we've done multiple trial runs, enough to allow me to recommend that we send the unit to the third party laboratory (UL(R)), so that we can keep pushing this ahead," said Mr. Robert Simoneau, Wanderport Corporation's Technical Advisor and Product Licensor.
Mr. Zoccali firmly stated, "When you have a single cavity prototype unit that incorporates multiple fundamentals, each potentially lethal in their own right, the chosen procedure is to find a balance between satisfying our need to validate functionality with the obligation to act responsibly, while maintaining momentum towards a final product." Mr. Zoccali continued by saying, "As engineering partners, we agree that we need to better understand and implement any and all safety features as necessary and that Wanderport's decision to work with a leading testing lab will go a long way towards making this happen."
Figure (C)-Actual Chart (June 2011): The graph was derived from the latest of many tests using a 2 channel type K-thermometer/temperature data logger downloaded on to a desktop on SE305 version 3.3.0.0. This particular chart shows 2 cycles of operation and is both consistent and indicative of what has transpired while performing in-house tests for the last month or so. Please note that both X and Y numerical values have been deleted, as it is preferred that precise representation on these values is made with the assistance of an accredited third-party lab. A dashed black line was also inserted representing baseline temperature as an alternate path for T1. Deletions of numerical values and dashed line insertion were done via image altering software solely for the purpose of illustration and clarity.
Note that: T1 and T2 are equal for the first division on X plane. This is a period of stabilizing where thermocouples and water reach a steady plane. Half way through the second division, T1 decreases dramatically while T2 increases dramatically. This first event ends approximately mid-way through the third division.
The second event begins roughly at the beginning of the fourth division, ending mid-way through the fourth. These events correlate the activation of the SCMHU with thermocouples for T1 placed at the input of the heat exchanger located opposite the RF shielding bulkhead in the SCMHU and is subject to any stray microwave energy disturbance and therefore, not a true representation of the temperature getting colder but rather is the method by which this delicate and accurate piece of test equipment is representing the microwave energy at ambient. Therefore, the dashed black line is a more important and accurate representation of baseline temperature. It is imperative to note that thermocouples would never be placed in an operational unit but these sensors are required to be placed in these dangerous environments for the purpose of measuring any temperature, as well as to gather feedback and various parameters.
Figure (C) continued: In conclusion, it can be noted that T2, shown in red, is not subject to as much interference as T1 because the sensor is located in an area that is not exposed to microwave energy. T2 represents the temperature of the water leaving the SCMHU and is raised extremely rapidly from the dashed black line (T1). This temperature rise has been consistent throughout various test durations and leaves no doubt about the heating capabilities of the technology and unit and demonstrates the capacity to heat water efficiently and economically while eventually reaching temperatures greater than regulations allow.
"Based on these extraordinary results, I recommended working with UL(R) as a safety testing lab for reasons that are obvious but also for reasons that are not readily apparent. It is significant to note they are also a certification partner for recognized energy efficiency programs, such as ENERGY STAR(R) and also a recognized resource for EMC testing, including FCC, CE and Industry Canada. I intend on improving our knowledge base rapidly and in actively promoting the inclusion of all the necessary features that I expect would lead us to a fully approved product for commercialization as rapidly as possible," further stated Mr. Simoneau.
Important Notice: All figures in this news release are subject to change without prior notice and are officially filed by Wanderport Corporation (WDRP) on www.otcmarkets.com in "Supplemental Exhibit "H" by choosing the "Financials" tab.)
Today was just the beginning to a very strong week IMO!!
Can't wait to find out what you hear from Andrew....
Go WDRP!!