Register for free to join our community of investors and share your ideas. You will also get access to streaming quotes, interactive charts, trades, portfolio, live options flow and more tools.
Register for free to join our community of investors and share your ideas. You will also get access to streaming quotes, interactive charts, trades, portfolio, live options flow and more tools.
buy/sell ratio or qty - 01 to 02, anyone have?
Should have already turned, a long time ago.
Chris12: GWGO, USXP. long time ago.
Best runners.
Just in today. I did before I saw the post about a R/M.
Read the last 10q that was filed, no imcome on that filing,
has that changed recently? yea, i know do your own DD, but give me break on this.
Ask geting hit, ask size is falling, but that is still a lot of share to move.
Four days at a miniumn ( assuming noone else want to dump ).
yea, but the displayed ratio sure looked good.
Well, I bought in.
I guess the only reall reason I did, was the b/a size.
Over 100mil on bid and 24mil on ask.
And yes I know the MMs are not required to update the buys or sales shown, they dont have to display a thing when it comes down to it.
Like you buyintime, I am here to whenever.
I have never seen anything good come out of a R/M. Not on pennies.
they list walmart as outlet.
One of the walmart in town was listed as having one of the games.
Went there never could find any by LFBG.
If i get a chance, will check the other two walmarts here.
Actually it looks like Walmart has reduced the space for PC games.
Rack use to be a little over 15ft with 5 tiers.
Now the PC game rack is about 4ft and 3 tiers.
I can understand that, with all the rage being the game consoles.
yes, the leds are incapsolated in an epoxy resin. The led lights I am familiar with have the leds surfaced mounted on a pc board.
The pc board before installation is coated with what is called a solder mask ( some what water resistant ).
What i think they are doing is coating the leds and the printed circuit board.
the sprayed coating on the led assembly would prevent humidity from condencing on the board. Which would happend as humidity can get inside the 'sealed' assembly. Items coated with this cause the water to form beads and roll off, since there is less of an adhesion.
Too expensive to coat every part with this, the pole, vanes, lamp holder would be powder coated.
yes, i did and was waiting for the 18s to fall.
Tommorow? I think it is possible. Maybe be more of a response because of the show.
I dont expect any increase in Ask/Volume till Sept 8, 2011 at the open.
The show closes Sept 7, 2011 at 11:00:00 AM CDT.
We want it all!
I read that as SavWatt was going to be there, and if I remember right, others, from their posts believed it too. Maybe I am remembering that wrong too.
I don't have any qualms about somebody correcting me.
Not a spoiled brat here that gets upset when corrected.
I do read the PRs, should have brushed on them.
But i sure thought the pr said they were going to be there.
Oh alright, I will start rereading them.
But when I read a PR and believe that was what i read, then i do not go back and reread them.
Well P2i is displaying. I could see if P2i is getting any type of revenue from SavWatt, they would display their items.
No mention of SavWatt or any of their items mentioned for P2i as an exhibitor.
http://www.virtualmarket.ifa-berlin.de/index.php5?id=227643&fid=2f7631be9d2ac986887dec48cf7e781b&offset=0&highlight=P2i%20Limited&bc_id=16b0c956f2b904020df85fa12a24dc6a&compact=0&tblank=&path=Home&Action=showCompany
But did they not put out a PR that said they were going?
I am getting tired of SavWatt. Beginning to think there is really nothing there. Their PRs are false.
Have gone thru all of the Exhibitors (1,328) and SavWatt is not there, period. I will take the loss on it and move on.
I wonder if they did not have the cash to go.
oh servit, if you ment the German 'no', it is spelled 'nein'.
Sheesh, there went all my dreams of next week.
Only two MMs are listed for SAVW, HDSN and NTFN.
Are they showing on L2?
Could the dilution have started early, but the MMs are still holding at 18 ask.. Just something I have been thinking about the last three days.
In previous post I put forth my thoughts on thinking what the MMs would do to keep from driving price down.
Once they file about the dilution, they can start at any time.
Just seem to remember reading that once the filing is done, that they can and can not be held to the date they quoted for it.
Yea, someone did. But no real dent in ask size.
I would think that the pole height is varible, due to different installation. Dont really think that they would limit themselves with a set pole height.
Well, pole height would be limited by the wind resstance of the top surface area of the vanes, light, battery box.
From the spec on other solar LEDs, seems that they are rated for 60 to 80 mph wind. At something along the height of 30.0 ft.
Purchased! That is the best news yet.
Now if they will only put out a PR or 10q reflecting when they have received the money for install.
Still have CUSIP number on my shares.
After RM woundup with 1,156 shares.
Were the restriction ever removed from the rm with Jupiter Global?
Sell off? Yea, lets get it over with and see if we survive.
Like the recession, lets get it done and start recovery.
Street Name, that was what I thought the default was, well not so much the default, but that was the way it was.
In 05 n 06, Large Cap proxies and such was coming to me from broker. Getting old, but still think I remember it that way.
Have not received any since 07 from my broker or the companies, but don't expect to since I changed to pennies n subs with quick trades.
Updated: I had always thought that about ownership, don't remember where I read it at. Has been 6 years about and always remembered it.
But talking to Scottrade to verify, after the sevit's comment, they said that the company did know the shareholders. No mention of cost to the company from obtaining it.
I told them that I thought all shareholder notices can from the broker, and this did occur with me some years back with ETrade.
Now I am told that proxies and notices come to me from the company itself.
So right now, i think any pat answer is still up in the wind.
Will call ETrade and see what they say.
ETrade tells me the same. The company does know and proxies and notifies come from the company.
Correction SAVW does know how many shares you have.
But really dont think the amount of shares held here really amount to much. JIMO.
thanks sevit. Called Scottrade to verify.
I had searched the town web site and never found it. It back thru the previous town news and articles.
The info you posted was from the town itself?
Found the number for public works street dept, will see if i can call in morn.
(301) 927-1452
I had posted earlier that I thought they were.
But after todays trading, I do not think they have.
I still think that when they do, the MMs may have instruction on how much to sell/release a day without driving the price down below 16 or 15. It defeats the purpose of them trying to raise captial for operations.
Savwatt could try to push their solar LED poles on them. (Maryland)
Solar LED poles I have research will power the lamp for 5 days on battery alone for most of the ones I have found.
Right now i am assuming that SAVW's would too.
And at half the cost the of the Eco-pole.
Trouble is that public works and such must go out for bids and unless they are looking then that's it.
Berlin Time: updated
http://www.timeanddate.com/worldclock/city.html?n=37
Assuming it opens at 9:00 am Berlin time
New York * Fri 3:00 AM
Chicago * Fri 2:00 AM
Denver * Fri 1:00 AM
Phoenix Midnight Thu-Fri
Los Angeles * Midnight Thu-Fri
* Daylight Saving Time.
Yes, I was wrong. Should have looked further.
http://ledlightingbysavwatt.com/page/683/buy-american
I think it is SAVW trying to come up cash.
MM are not going to just dump the shares and drive prices down.
Maybe they will hold for a bottom of 16 or maybe 15.
Just my thought that crossed my mind earlier in day.
Nothing to base it on.
Alright, I cant find him on FB.
Come up with some guy in Wy.
Give me a break here and post the link, or name he goes by on FB.
Searched for: Brendan Magone
Even with all the other manufactures and distributers in this business of solar LED lighting, they still seem to me to at least get enough of market share to make inroads into it.
Right now the way they are going, they will not make it. To me it seems like they will barely hang onto the fringes of it.
None of the PRs, 10q, or 10k have mentioned anything about contracts, significant revenue. Only PRs mention 'intstall', with no monetary value given. I think this is the first co. that has not made mention of how much a contract was worth to them in a PR.
Actually the cost to cities, and universities ( i think them too ), should be available to the public thru Freedom of Information Act.
That to me is hold ing back the PPS. Surely they did not do all this install as a PR stunt.
SavWatt has changed web statement:
at botton of page.
Assembled in the USA
Where did you find the resignation.
His shares are no longer restricted?