Register for free to join our community of investors and share your ideas. You will also get access to streaming quotes, interactive charts, trades, portfolio, live options flow and more tools.
Register for free to join our community of investors and share your ideas. You will also get access to streaming quotes, interactive charts, trades, portfolio, live options flow and more tools.
Excellent Post FLA!
Very, very good. Let's see how it plays out. I continue to add though just in case your scenario doesn't play out. But I have to say that you may have figured out the hidden DFW clue. Or maybe not. Yes, there are so many invariables and those "certain things" that could come into play.
I would say, though, that IF we saw a price decline to the .004 or .003 level, that everyone would back up the truck and load up. As close as were are, I don't see that yet, but anything could happen at this point. We may lose a few shareholders also as we move into the tax loss season, although there are ways that can be played within having the "risk" of SVMI moving up while open is out of the position.
DFW is correct in stating that this is no scam. Bad management in the past? Probably. Fantastic management from here out. Absolutely! I may be making a short term mistake in accumulating at anything I can afford below .008 but I am willing to take that risk. Besides, it's my decision and my money. And I still believe I will be right on over the longer hold.
This situation will play out rapidly over the next 3-4 months. An eternity for a trader, but very short term for me. I remember those that told me I'm a fool for buying into the IHDR hype. Hmmm. I can't hear them anymore. .06 to over .20 in a few weeks and a hell of a lot more to go. Over the long term, of course. The only way I can play.
Call Craig at IHDR or CJ.
You keep asking the same question, but have your every taken the time to make a call?
Yes, How do I attach it to this board? Or do I attach it to someone's email. That I know how to do.
They will not sell for under $5.00
Oh, IMO :)
Bob Blair is Executive VP-Sales.
A super guy. Greg brought him in from Texas to build the warehouse and get the equipment and machinery in order. I met him at the site approx six weeks ago.
Very intelligent in his field. They speak engine-speak, and quite honestly, a lot of it goes over my head. I am learning very rapidly though. I will be visiting shortly once again. Maybe within three weeks.
PS. I have the business cards in my e-mail but do not know yet how to post them to the Savi board. Any help would be appreciated. Remember, though, I am a beginner at this!
Nope, I don't think you are missing something. Look at today's volume, and it appears the word is beginning to spread. Am told we ain't seen nothing yet!
I saw two large DynoValvePro's being tested on a new International diesel engine. It is being tested at the C.E.E. facility portion of the warehouse. It has to test for a minimum of 1000 hours to be certified by the CEE.
I asked about production dates also. Greg does not want to be held to a time frame or promise a certain date. He wants to have everything completed in a precise sequence as to not repeat past delays and/or mistakes. My estimate would have to be put at April or May. Could be sooner if certain things happen as planned. But we all know about unanticipated problems.
At this point in time, the entire facility is being prepped for both production and a research facility. The ceiling equipment cranes have been installed and are operational. Part of the problem with the current delay was that in order to install the cranes, all of the machinery had to be reset in one of two warehouses. Once the first warehouse was equipped with the crane, all of the machinery had to be moved from the second warehouse to the first in order to install crane number to in the second warehouse. A lot of moving, and those are sum huge and heavy machines that had to be relocated. The electrification of the warehouses is now being done.
I will have my daughter scan the cards into her computer and email them to me. I will find a way to get it posted to the board as soon as I get it.
And it is not the same that you are describing.
Hi Guys,
I spoke again today with Brent. I will be meeting with him tomorrow afternoon to get all the details of his visit. But it looks like the word is getting out to us anyway.
Suffice it to say that CKYS is growing exponentially. Many, many exciting things come down the road. Most of what I am reading here this afternoon is pretty close to what we have all been waiting for.
I am not a technician, but our friends who are, are calling this one very nicely. As a fundamentalist, I can only say that IF the AF's do show .027 EPS, then this AM we were selling at a whopping PE of .6. Need I say more?!!
:) I have their new logo on the business cards that Greg and Bob gave to me yesterday. I like it!
Still haven't had the time to put things into a post yet. I did speak with Bob this AM for about 20 minutes, and got a call from the CEO, Greg. I am having absolutely no problem getting through or a call back. Maybe they do read this board after all!
I am here to answer a few questions, but please don't ask me the technical or engineering type questions. I am not an engineer, and even if I was, I am absolutely positive that they would not divulge that info at all.
I am all ears but take it easy on me!
Hi Everyone,
I almost forgot to post this for Brent. I spoke with him for almost two hours today after his meeting with Jim Plant, CEO for CKYS. He was very, very excited with what he learned. I was already a shareholder, and when I told him of the company a week or so ago, he offered to stop by St. George and visit.
He wants me to tell you that he will post about his visit, if not over the weekend, then Monday by the latest.
Take Care
Hi Rockets,
After my conversation with Brent today after his meeting, I might add that you will probably be correct. Much, much higher would be my guess. I already hold a position here prior to Brent's visit. When I told him about this company, he offered to stop in on his way from Salt Lake City to Palm Springs.
I am more excited now than I have been at anytime during the last four weeks!
Hi Moose,
My overseas calls have been rescheduled for 11:00 PM tonight.
Sorry, no photos allowed today. I was allowed to take more still pix of the equipment but chose not to. I did witness the installed cranes, though, and the equipment is now being placed in order to get ready for future production.
I am going back tomorrow but not inside the plant. I will shoot some video for you at the entrance to the plant and maybe I can get a some office shots for you too.
Good Evening Everyone,
Brentjanice wanted me to post a small note to let you know that he met with Mr. Plant, CEO of CKYS, today for two hours. I spoke with Brent for almost two hours after his visit. He wants me to let everyone know that he had an excellent meeting and will be posting about his visit no later than Monday. I will be meeting with him in Palm Springs on Friday.
Take Care
Good Evening Everybody,
Just want to drop a quick note to say I had a very informative meeting today with Greg Sweeney and Bob Blair at Savi. I will post a condensed version of my visit, but I have no time this evening.
Suffice it to say I had a very good meeting, a very informative tour of the equipment, the warehouse, and the dynovalvepro testing zone. And yes, Dynos were being tested while I was there.
I am accumulating, not buying for the short term. I never said I was buying for the short term. Most every stock I own is for the long term. I tend to watch my positions grow through time, as I am not sharp or nimble enough to trade correctly. I usually get my long term picks right, and it is always an "E" ticket.
You are welcome! Thanks for the stock. I hope you are not able to buy any stock down there, if you know what I mean. Should it get there, I will be buying with you.
You are right Bly. But because when what I perceive to be very good news is posted, then we have to listen to endless rants of why that can't happen. I am going to simply update what I see as progress on the plant floor, electrification, etc. along with potential staffing of employees and such.
I would not be expecting much more than that until my visit in December. It's by then that I would expect the plant to be close to operational.
Hi Penny,
Is the chart for CKYS a thing of beauty yet? Own a bunch already, but awaiting your T/A blessing!
Good. I will give you my honest assessment later today or tomorrow. You might want to add a little more for him after that.
Hey BB,
After IHDR makes a small fortune for your son's college education, make sure he majors in law and passes the Bar. Look at all the attorney fees you could save. :)
Always thinking, I am!
Thanks, I will report back and tell only what I am allowed to.
I don't take it personally at all. I am not really down. Like I said my ave. now is under .008, down a bit, but nothing like you guys longer term. I have been averaging down though the last few weeks, and now I have a nice little position. I am hoping I am correct, of course, but only time will tell.
The same thing happened to us at IHDR when it went down. I believe in them, so kept averaging down. Now I have a 3.5 bagger, and am expecting a heck of a lot more than .23.
With Savi the same. I bought some everyweek for eight weeks now. Bought more yesterday, and will buy more next week. If I am wrong, well hopefully IHDR, CKYS, SPRL, or another one will help to offset any lose here.
But I will say it again, I do not think I am wrong on this one either. Both IHDR and I were shouting to buy IHDR at .06 four weeks ago. I think the same will occur here, but to date I am not shouting yet. You will know once I am 100% convinced. That will occur with the first production, maybe in April, maybe in May, maybe in Feb. Who knows? Remember, I don't trade, I build for the longer term. I am not smart enough to figure out the day to day potentials, or to out think the collective emotions out there driving prices daily.
Good Morning BB,
Looking back at all of yours and his info, yes he was right. But I am not a bag holder. My ave. is now under .008. Well, I guess it's a small bag. Hey, does it match my outfit today? :)
Anyway, I can't really pat him on his back as I wasn't around. But if it helps, here goes, "Great Calls Back Then BiPhase." I hope my calls from here forward will warrant a "Good Call Blockman" sometime in the future.
Take Care
I am ready!! I've been ready.
OT. What's your read Freto on CKYS and GBDX. Getting any closer to a breakout.
Did you see our SPRL this AM. Finally some news! Hoping for news on the above two also.
Hi Westeffer,
You are correct! I am working with many utilities regarding the green tags for our little company. Seattle Electric and Puget Sound Electric are two of the most recent. Here in Ca, due to the recent signing of the Envir Law, they are scrambling to meet the mandates implemented. Thoughts from most all are that they is no way Ca can meet those new standards and laws. Don't know, but all the hoopla about green gases and the warming of the earth is creating huge new industries to combat this. I can remember in the mid 70's when I was a stockbroker, all that was spoken was that we are going into a prolonged cooling trend with a potential ice age on the way.
Who really knows, but as long as we are on the right side of the equation there is always money to be made.
My thoughts, John, are why wouldn't they. The are in the business to create electricty. How they make it doesn't matter to them as long as it is profitable for them. And with the EC V they can create the juice clean, with no pollution.
It still looks like somebody else believes in this if you look at the stock. All that volume can't be only from your followers. Maybe this contraption really does work!
:) :)
We'll see, but just a guess.
My guess might be same CEO and a New President. Only a guess though.
Good Post Rags,
You are correct as not to trust anyone that you do not know. Thank you also for watching my back. I should let you know though, I was a stock broker for 14 years from 1975 through 1989. I watch my own back as everyone should.
Much of the disagreement of what we witnessed last week in Mobile could easily be resolved by anyone through the purchase of an airline ticket and a trip to IHDR's testing facilities. The old saying "Seeing is Believing" is probably appropriate here. Unless I inadvertantly went to Las Vegas last Tue and Wed and watched an illusionist performance, I think what I witness and heard over two days is what John has for the most part reported accurately.
I state again, "Seeing is Believing," and anyone agruing or questioning John should take a hike. To Mobile, of course.
Moose, Are you still long IHDR. Did you buy any on the dip?
PS I was the 250k of SAVMI at .0065 near the close. Was bidding at .006 for a couple of hours with no takers. Had to move up before the close.
Hi IHDR Man!
Another great day! Keep up the good work and we'll have all the float tied up the the really good news hits! :)
Love all the objective discussions today. Appears with every "concerned" comment, we creep up a little more. Too bad, though, I wanted more shares at a lower price. :(
Hi John, I like all the negativity (objective posting rather) that you are stimulating today. Hey, have them keep informing us. It appears to make the stock go up.
We uninformed like that! :)
Good Post V,
This has been the answer for weeks now, but for some reason it is not sinking in.
I think you are mixing up the product. You are obviously talking about the DynoValve and DynoValvePro frojm SaviCorp.
You are such a pumper!!
I like it, as long as you keep pumping out the facts. If you build it, they will come. Hey, I heard that somewhere before.
Nope, not at all.
I will ask him for you, even though he wasn't around Savi on any of those dates. But I do appreciate all the negative posts. Got another 200k today and am waiting for more on the bid. Anybody need a tax loss, please fill me.
I am not trying to be a wise guy here, as I am buying. I am just taking advantage of the same old regurgitated news. If they take out Cornell and if they do manufacture a DynoValve with any of the equipment I have seen packed into the warehouse, I might make a dollar or two. So keep the wonderful posts coming!
Take Care
You're right. How about a half circle?!
I said, "Now I can understand it better. Many Thanks."