GTEM PR'd that the faulty tail piece would delay the launch of the test strat back in July and that the new part was to be in during August. Those PR's are not found on the website. Now it took them from August to Dec to replace one faulty tail piece and they are going to move it in a matter of minutes, days, weeks, or months?

So frank they can just float it over the fence? Thanks for the info. Also not to sound negative but does the air space at Edwards extend past the base? I mean if the air space covers Palmdale and surrounding cities won't they still need some sort of permit IF it has to float over a populated area?

Anyone else care to take a stabb at these ?????'s.

When will GTEM get permits to move to Edwards? Will that be a material event that deserves a PR? What other test will be run in this next phase? How high do they intend on floating it this time?

Crash your wasting my time with you comments and can't or don't wish to answer ???'s. Take care and GL.

Loading a truck and unloading a truck is a matter of minutes.


That statement isn't rational at all. You plan on loading highly sophisticated equipment and 1000 of LBs of material, not to mention unloading in a few minutes. Get a life.

Never mind crash. I wish to discuss this with an objective rational person and that isn't you. Take care and GL.

Yes and my ??????? was how long will that take. The company sure doesn't seem to want to give details and you act like you know it all.

And just how do you know this? Seems to me it's a little taller than most power lines will allow and a little to long for a semi.

So then they plan on dismantling it to move it? How long will that take? May still need permits for oversize load on city streets? Just want to know their plan. Could take weeks to get permits, weeks to dismantle and reassemble. I just would like a time frame other than.... The next phase line.

I'm not talking about Edwards. I'm asking do they have a permit from the city of Palmdale to move it to Edwards. I know they have an SOC from Edwards. That was not my ???

Due for another LOI soon or something to hang your hopes on. I really do wish GTEM could get a strat in the air but I just don't think they ever intended to in the first place. We know the WI-Fi works, we know you can stream video from 100 feet in the air, we know you can float a gas filled object 100 feet in the air, we know the solar panels work, and we know the propulsion system works. What we don't know is how to deal with the water discharge at 65,000 feet, keeping it on station at 65,000 feet, will the Wi-Fi work at 65,000 feet, what will happen with the gas at 65,000 feet, and if it can stay aloft for 18 months.
When will GTEM get permits to move to Edwards? Will that be a material event that deserves a PR? What other test will be run in this next phase? How high do they intend on floating it this time?

10 QSB is out. To long to post. Good luck with your spin on this one.

GTEM in Frankurt .31 Euro = .40 US.Volume 18,621

http://finance.yahoo.com/q?s=GTCA.F

Thanks low eom

ATTENTION ALL
TDameriturd has updated my portfolio with the NEW PGSW shares. Etrade has yet to however.

TD still won't let me buy though.

There won't be a Dec short report as the Nasdaq doesn't show pinksheet short positions.

GTEM in Frankurt .33 Volume 12,121

http://finance.yahoo.com/q?s=GTCA.F

The fact that the Transfer Agent has sent and the DTCC has recieved the new PGSW shares tells me the Brokers are short. They don't have enough PGWC to exchange for the PGSW. The Brokers are correct when they say they haven't recieved them yet, but I believe it because they haven't sent in THEIR request for them. That's what they are not telling you. JMO
I also believe they are buying all they can now so as not to have to send in so many PGWC shares to do the exchange.

GTEM frankfurt .33 euros .4313 US. Volume 6,121 bid .31 ask .37

http://finance.yahoo.com/q?s=GTCA.F

low please remove my post 4576 as I have tried 4 times to start a new board for GTEM but Matt keeps removing them. Guess he doesn't like unbiased boards for GTEM. Thanks and keep up the good work. I like your commentary and charts.

GTEM dosen't need bashers they do enough of that all on their own. No wonder the AMEX got them off their exchange.

Insiders need to unload for their new options next year. This happens on a regular basis now.

GTEM new PR should be good for a .10 pop that won't hold either. LOL

I want more in the .004's. Please. I want to put them in my stocking.

Hey Trash that is what I have been saying.

Posted by: cam_66
In reply to: stockmjb22 who wrote msg# 57852 Date:12/15/2006 11:16:51 AM
Post #of 58584

Show me the contract and I'll ride. Till then I'll wait for re-entry in the .40 area. Believe me if they don't follow this up soon I'll be able to buy in the upper .20's again. JMO

Said it on Friday and seems to reacting just like I said. Sorry that it doesn't fit into your perspective but FACTS are FACTS.

Not much of a bounce off the morning low of .43. The MACD is still negative and turnig down further. Momentum is negative and we are not staying above the 15EMA. This all on the 5 min chart. Not looking good for holding .40 today. Good luck folks you'll need it. Now if news comes out well then you may have something.

.70 didn't hold, .60 didn't hold, .50 didn't hold and now how about .40 will that hold? Without news it will drift back to ???? .30 or .20? JMO

Kona what about the brokers and MM's shorting? Are you saying that doesn't happen? Hope I didn't misspell anything or use improper English.

Why no new PGSW shares yet?????? Could it be that we know what is going on and the SEC,DTCC,and the brokers don't want it to get around? Why is it that the DTCC can't exchange the news PGSW shares that they have received from the T/A for the old PGCW? Could it be they don't have enough to do the exchange? Shame on you low life's for doing what you have done. We all know what it is but will never be able to prove it since you are SELF REGULATED. What a crock of sh*t. You are the problem if you would only let us see what you have been doing and getting away with for YEARS!!!!!!!!!

Hey crash you going to ignore mide now? Not trying to be an as* just want you to see that one can be all for GTEM and still be cautious.

I may have sold to early at .57 before the news came out but if I'm not mistaken I would have lost .10 a share today. Don't knock profits they are hard to come buy if you hold to long.

What was the payload weight? size? What new systems were on it? How did or was the new tail piece even on this strat? You know the one they had to replace because they found flaws in it. Did it have a pilot station on it? What are the anticipated window for ( I mean do you permits to move this to Edwards) the next phase? What else will be tested in the next Phase/ That is just off the top of my head. Lack of info is written all over their latest PR. But then again I'm just a lowlife shareholder who doesn't deserve to know WTFIGO.

Another voice of reason here. I was begining to think we were a board of. Well I won't step there either.

It's not a secret now. Best of luck to you. Wish I had that many but to many iorns in the pot right now.

You know crash that not everyone shares your all in approach to GTEM. Many have been burned here by GTEM, and listen is right in my view. Now I am entitled to my view just as listen is theirs. Right? Lack of solid info in GTEM's PR's speaks volumes as to what is really going on and some are better at seeing it then others.

OT.. Please join me here for all points of views on GTEM. Good or bad. I want info and peoples opinion. Thanks.
http://www.investorshub.com/boards/board.asp?board_id=7761

The last post has the wrong board ID.

Hey docS. How is that chart looking now? Just wanted your input. Thanks. I am not liking the 5 min daily here. Just a learner am I.

eventually the price will catch up to the money flow and then they will all be chasing it. BOOM

Finally filled my other order. Thought they were going to pass me by.

Thanks sg. I had to create a new room again for some reason Matt took the board down. It is Globe Tel Lounge. Thanks again. Evidently I can't ask folks to join me through other I-Hub boards.