Register for free to join our community of investors and share your ideas. You will also get access to streaming quotes, interactive charts, trades, portfolio, live options flow and more tools.
Register for free to join our community of investors and share your ideas. You will also get access to streaming quotes, interactive charts, trades, portfolio, live options flow and more tools.
don't make sense to just stop the company after all this hard work bigwilly likes what he sees they should give it another go if they have given up on hcti big will going to get some reeses eggs and regular reeses and back to reeses eggs ooooooooooooooowwwwwwwwoooooooo so excited!!
https://hybridcoatingtech.com/pdf/HCT_brochure_READERSpread_Eng.pdf
bigwilly likes to copy and paste bigwilly was the kid sitting beside you in scool eating his glue yeah! bigwilly
Due For A Growth?:Hybrid Coating Technologies Inc, (OTC US:HCTI)
Avatar NewsPlanet Team Posted onJuly 12, 2019
Trading tendency “Remain Flat” on Thursday, July 11, 2019, of the Hybrid Coating Technologies Inc, HCTI of exchange OTC US.
Review Of The Hybrid Coating Technologies Inc In Stock Exchange Of OTC US:
The Hybrid Coating Technologies Inc (OTC US : HCTI) started the business at $0.0001 and closed at $0.0001 with the change of $0 with 0% with the previoues price $0.0001 during the episode of previous exchanging session.
Volume Indicator:
The Company’s current volume remained at 4120900 with the percent of 273.01 percent. It will also better to share yesterday’s volume of the company i.e.; 1000000. Trading volume facilitate the investor to identify the momentum in a stock and confirm a trend. If trading volume enhance, prices generally moves in the same trend. That is, if a security is continuing higher in an uptrend, the volume of the security should also be increased and vice versa.
High & Low Prices with Gap-Up & Gap-Down:
The Gap-Up $0 is the difference between the current session’s open and the previous session’s High and Gap-up percentage became 0%.
The Gap-Down $0 is the difference between the current session’s open and the previous session’s Low and Gap-down percentage became 0%. Trading comparison of current & last day sessions has value for investors. The current high trading price remained at $0.0001 while previous high price was recorded at $0 and current low trading price remained $0.0001.
Weighted Alpha HCTI:
The Company’s Hybrid Coating Technologies Inc, has the value of Weighted Aplha 0. Weighted Alpha alert that stock has increased or decreased over one-year period with a higher weighting for recent price activity. A Positive sign of weighted alpha shows that the stock has increased while a sign of Negative weighted alpha shows that the stock has decreased.
Moving Average (MA) Signals / Strength / Direction Hybrid Coating Technologies Inc:OTC US:
20Days Moving Average (MA), a short term indicator used to observe price changes. 50Days Moving Average (MA), a medium term indicator used to observe price changes. Moving Strength: is the Strength of the signal compared to its historical performance where maximum is the strongest this signal has been and minimum is the weakest. Moving Direction: Indicates whether the Buy or Sell signal is strenthening or weakening or whether a Hold signal is heading toward a buy or sell signal.
20 Days Moving Average (MA): Percentage : 0001%, Signals Hold having the strength of 0 with the direction of Steady
50 Days Moving Average (MA): Percentage : 0001%, Signals Hold having the strength of 0 with the direction of Steady
09-Days Stochastic %(K) & Historical Volatility:
The percentage value of 09-Days Stochastic (K) of the Company Hybrid Coating Technologies Inc recorded at 50%. This sign shows (on a range of 0.00% – 100.00%) where the price closed in-relation-to its price range over the last 09-Days with a 02-periods exponential moving average applied. The average deviation from the average price over the last 09 Days.09-Day Historical Volatility recorded at 898.42%.
Current & Last Prices (Buy / Sell / Hold):
The Current Price Signals & Last Month Prices Signals of HCTI: Hybrid Coating Technologies Inc:
Current Price Signals “Buy”
Last Month Price Signals “Buy”
One Year Return & Five Years Revenue:
The percentage of 01-Year Return of HCTI recorded at 0%, while the revenue growth percentage over 05-years recorded at -99.94%.
Shares-Out-K / Float K and Beta Hybrid Coating Technologies Inc:
The indicator Shares-Out-k indicates the common shares that have been autorized, issued and purchased by inverstors. The Shares-Out-K recorded at 0. The regular shares, a company has issued that are available to trade (shares outstanding – restricted stock) denoted as Float-K i.e; (0). The Beta 0 value that measure the volatility of a stock’s returns relative to the market.
oh I like the way you talk making me excited for another lunch and snack before dinner!!! bigwilly likes cakes and lobsters and starting to like hcti a little bit more too!!!!
bigwilly thinks too many 1's for sale by retail shareholders in order for this to go the 1's have to be a lot less without news it is like a cheesecake without cheeseeeeee!!
ho ho ho cheetos and sprite none of this matters now hcti appears to be finished hearing joseph illness is really bad and darin has moved on working with polymateresearch and the sec has been notified about this ticker if this is true all that information you provided over the years was helping out darin and joseph up to this point ho ho ho oh no joseph is in really bad condition from what is being said and the sec has been notified ho ho ho oh no my 500 dollars is wasted on lies and joseph funeral cost and darin is reaping all the benefits ho ho ho no bigwilly lost so many calories
bigwilly likes to sit down and eat 3 lobsters in one setting lobster is sooooooooo sooooooooo goooood i like taking my hands and cracking opening that shell and pouring butter all over hhhhhmmmm now bigwilly wants some popcorn too!
ho ho ho oh no sec bigwilly heard the sec has been notified and there is a request to pull the ticker bigwilly should have saved his 500 dollars for more yoohoooos ho ho ho oh no bigwilly also heard some investors are not immune to being involved with hcti and promoting over social medias and they are deleting accounts ho ho ho oh no sec is the real deal bigwilly is going to lose his 500 dollars and so many calories ho ho ho oh no darin and joseph why why all my sweet delicious calories are in your pockets? ho ho ho oh no
ho ho ho then it looks like they have lost their money cause there is 1.5 billion on the ask ho ho ho i wish i had 1.5 billion cheetos ho ho ho
come over here and talk to me you are smart is this a sunken lobster? lobster is so so good with butter i can't stop thinking about lobster now bigwilly hungry!!!!!!
bigwilly got 500 dollars on the other ticker what is the status you in or not bigwilly likes your style what is the status i love pizza the most with extra cheese bigwilly can't get enough of the cheese bigwilly like
bigwilly cant read it nothing there i wish there was a donut there
good luck on this one
are you still in hct*? bigwilly likes your style but bigwilly don't think hct* looks like a baconcheesburger more like a dead possum
bigwilly thinks this one might be going up up up up and away soon cause I smell something a brewing and it aint bacon aaaaaaaawwwwwwwww yes greasy cheesy bacon.
ho ho ho think about it darin is working with nti and that business is still operatings with joseph being dead or sick but they said they cant operate hybrid cause he is being dead or sick so the money they have from the public just disappeared into somewhere i guess is what they are saying and they believe it is in nti so basically it is pretty easy basic maths i had a milkshake french fries a sausage sandwich and pork chops before 10:30 this morning so i was starving before lunch sorry if bigwilly is a little crankaaaaaaaaaaaayyyyyyyyyyyyy!!!!
ho ho ho what more do you need darin is working at nti and the hcti company is not doing business anymore can't wait until dinner tonight still working on my lunch ho ho ho
joseph is a winner ho ho ho if i serve my memory right hcti was posting some electronic devices with their liquid pouring into electronics or something to do with some computer components which i don't know nothing about computers except i can look at girls and order food right from my desk that i have in the floor but this seems interesting enough for ho ho ho big willy big willy thinks joseph is working on something for hcti in bigwilly's opinion ho ho ho who knows
going to order some pizza and cheese steaks and some baked brownies and ice cream oooooooohhhhhhhh bigwilly is getting excited ho ho ho
US20190184373A1
bigwilly did not say it was it is however about the ceo of hcti joseph and the application started in 2017 and it takes 18 months to process and the actual application is pending approval can't wait to see what kristul has in store (seems company has gone silent) for a good reason in bigwillly's opinion bigwilly going to get some fish sticks
2017-12-14
Application filed by Pavel Kudryavtsev, Nikolai Kudriavtsev, Joseph Kristul
2019-06-20
Publication of US20190184373A1
2019-07-07
Application status is Pending
According to the United States Patent and Trademark Office (USPTO), it takes about 22 months to get patent approval after going through the steps to file a patent. If you're eligible for a prioritized examination for plant and utility patents, known as Track One, you might get approval in six to 12 months.
bigwilly heard a birdy new patent by joseph
https://patents.google.com/patent/US20190184373A1/en?assignee=joseph+kristul&after=priority:20170101
Method of Obtaining Inorganic Sorbents for Extracting Lithium from Lithium-Containing Natural and Technological Brines
Abstract
Proposed is a method of obtaining inorganic sorbents for extracting lithium from lithium-containing natural and technological brines. The method is carried by contacting a soluble niobate (V) with an acid in the presence of at least one zirconium (IV) salt to obtain a precipitate of a mixed hydrated niobium and zirconium oxide. Subsequent steps include granulating the precipitate by freezing, converting the product of granulation into a Li-form, calcining the Li-form, and converting the obtained granulated mixed lithium, niobium, and zirconium oxide into an ion-exchanger in an H-form. In the obtained H-form the inorganic sorbent is ready for use in lithium extraction processes.
Images (3)
Classifications
B01J20/3028 Granulating, agglomerating or aggregating
View 6 more classifications
US20190184373A1
United States
Download PDF Find Prior Art Similar
Inventor Pavel KudryavtsevNikolai KudriavtsevJoseph Kristul
Worldwide applications
Application US15/841,760 events
2017-12-14
Application filed by Pavel Kudryavtsev, Nikolai Kudriavtsev, Joseph Kristul
2019-06-20
Publication of US20190184373A1
2019-07-07
Application status is Pending
Info Similar documents External links USPTOUSPTO AssignmentEspacenetGlobal DossierDiscuss
Description
FIELD OF THE INVENTION
[0001]
The invention relates to the field of chemical technology, namely, to the production of selective inorganic sorbents for the extraction of lithium from lithium-containing natural and technological brines and can be used in the extraction of lithium from alkaline and slightly alkaline solutions with a high content of sodium ions and ions of other metals. In particular, the invention relates to the aforementioned method, which is carried out in the presence of oxidizing or reducing agents and by using ion sieves.
DESCRIPTION OF THE PRIOR ART
[0002]
Lithium is historically extracted from two different sources—continental brines and minerals of hard rocks. At the present time, lithium finds use in the production of glass, ceramics, medical substances, metallurgical products, as well as in such fields as nuclear energy, aviation, etc. Demand for lithium will certainly grow when vehicles become greener, and electricity becomes cleaner. World sales of lithium salts currently amount more than $1 billion a year, because this element becomes an important component of lithium-ion batteries, which now feed everything from electric cars to power tools and smartphones.
[0003]
According to forecasts, over the next eight years the demand for lithium will increase by more than 300%. Nevertheless, whenever larger electric companies expand the power of solar energy, demanding the storage of high-density energy Li-ion batteries, the demand for lithium can skyrocket. As an example, Duke Energy (one of the world leaders in production of energy) currently stopped the proposed nuclear power plant in Florida and instead plans to invest in a $6 billion solar and battery infrastructures. The ever-increasing demand for batteries and the need to store high-density energy created an acute dependence of many industries of the world industry on lithium, which triggered a global search for new lithium sources.
[0004]
Nowadays, hydro-mineral raw materials gradually become the main source of lithium. The main attention is paid to the development of methods for processing lithium-containing hydromineral raw materials. The most commonly used in practice is a method of extracting lithium from natural brines by precipitation of sparingly soluble salts. However, from an ecological point of view, more promising are sorption methods of extraction of lithium from natural and technological brines that are poor in lithium content. In view of complexity of the salt composition of hydromineral raw materials, the use of highly selective inorganic ion-exchange materials is the most promising method for recovery of lithium.
[0005]
Chinese Patent Application Publication CN101944600A published on Jan. 12, 2011 (Inventors: Xichang Shi, et Al.) discloses an ion sieve adsorbent for extraction of lithium ions based on lithium-titanium oxide and a method for preparing a precursor for this ion sieve adsorbent suitable for adsorbing enriched lithium from salt lake brines, seawater, and other liquid lithium resources. The method consists of using titanium dioxide and a lithium salt as raw materials, grounding the raw material in a ball grinder, and drying the grounded product for preparing lithium titanate as the aforementioned precursor through a high-temperature solid-phase roasting process. The lithium is then eluted from the precursor (Li2TiO3) by inorganic acid to prepare an ion sieve H2TiO3. According to a preferred embodiment, the process is based on a molar ratio of lithium to titanium of 2:1; anhydrous ethanol or acetone is used as a dispersion medium; grinding is carried out in a ball mill from 2 to 3 hours; the grounded product is calcined at 800° C. for 12 hours; and a lithium Li2TiO3 adsorbent is obtained.
[0006]
U.S. Pat. No. 8,901,032 issued on Dec. 2, 2014 to Stephen Harrison, et al. discloses a method for producing a porous adsorbent based on activated alumina for lithium extraction. The method is carried out by contacting a three-dimensional activated alumina with a lithium salt under conditions sufficient to infuse lithium salts into activated alumina for the selective extraction and recovery of lithium from lithium-containing solutions, including brines. Lithium intercalated sorbent based on activated alumina provides a controlled and maximum permissible lithium to aluminum ratio, and a favorable structural shape and dispersed composition, thereby providing increased throughput for extracting lithium. In certain embodiments, the lithium intercalated sorbent based on activated alumina has a molar fraction ratio of lithium to aluminum in the range of about 0.1 to 0.3, and preferably up to about 0.33. The ratio of lithium to alumina is critical in stabilizing the structural form of the material and maximizing the number of lithium sites available in the matrix for loading and unloading of lithium from the brine solution.
[0007]
International Patent Application Publication No. WO2003041857 A1 published on May 22, 2003 (Inventor: Alexander Ryabstsev, et al.) relates to a method for producing granulated sorbents in the form of the double hydroxide of aluminum and lithium in a waste-free solid phase of aluminum hydroxide and lithium salts in a mixer, with subsequent continuous activation of crystalline DHAL-Cl in a centrifugal mill activator in order to obtain a defective crystalline structure. The obtained product is mixed with chlorinated polyvinyl chloride, as a binding agent, and with liquid methylene chloride. The granulated sorbent is suitable for selective extraction of lithium from chloride salt minerals with an extraction degree of 95%.
[0008]
Also, known is Russian Patent No. 1524253 issued on Feb. 15, 1994 to Melikhov, et al. This patent relates to a method of ion exchange removal of lithium from solutions. The method includes the steps of passing the solutions through a sorption material consisting of a sorbent selective to lithium and based on manganese oxides or manganese and aluminum oxides in a hydrogen form and an auxiliary sorbent in a salt form, followed by their regeneration, respectively, with a solution of nitric acid and alkaline solution. The method is characterized in that, in order to increase the degree of lithium recovery from the natural and technological brines, as well as the degree of regeneration of the auxiliary sorbent and the reduction of the regeneration time, the sorbent is selective to lithium in an alkaline medium based on titanium hydroxide, the transmission is conducted through alternating layers of the selective and auxiliary sorbents, and the regeneration of the auxiliary sorbent is carried out with the original lithium solution at pH 12-13. A hydrated titanium dioxide or a mixed hydroxide of titanium and iron is used as an auxiliary sorbent. A disadvantage of this method is that the obtained sorbent has low stability in the presence of oxidants or reducing agents.
[0009]
In Transactions of Higher-Education Institutions (Izvestiya Vuzov) “Non-ferrous Metallurgy” (Tsvetnaya metallurgiya), 1978, No. 3, pp. 50-53, P. Kudryavtsev, et al. disclose an inorganic ion-exchanger ISN-1 selective to ions of lithium. What is disclosed in this publication, is a method of obtaining an inorganic sorbent for extracting lithium from natural and technological brines. The method involves contacting the soluble niobates (V) with an acid, granulating the resulting precipitate, transferring the obtained product to calcining at an elevated temperature, and then converting the product into an H-form.
SUMMARY OF THE INVENTION
[0010]
The method of the invention is intended for obtaining an inorganic sorbent for extracting lithium from natural and technological brines and relates to the field of chemical technology, namely, to the production of inorganic sorbents selective to certain ions.
[0011]
An objective of the invention is to increase the selectivity and exchange capacity of sorbents to lithium on the basis of niobium oxide, as well as to improve chemical stability of such sorbents in cyclic operations.
[0012]
As mentioned above, the known method of P. Kudryavtsev, et al. involves contacting a soluble niobate (V) solution with an acid to form a precipitate, which is comprised of a mixed hydrated niobium and zirconium oxide. The obtained product is frozen and then defrosted for obtaining a granulated mixed hydrated niobium and zirconium oxide. The following steps include subsequent transfer of the material to washing with a solution of lithium carbonate, calcining the granulated mixed hydrated niobium and zirconium oxide to obtain a granulated mixed lithium, niobium, and zirconium oxide, and transferring the finished product to an H-form by washing with the solution of the acid. The method of the invention differs from the aforementioned conventional method by conducting a reaction of niobates (V) with an acid in the presence of zirconium (IV) salts and at a ratio of niobium (V) to zirconium (IV) in a solution in the range of 1:(0.1 to 0.7). The obtained lithium-form material is calcinated at a temperature in the range of 450° C. to 600° C., and the finished product is then treated with an acid solution, e.g., a nitric acid solution, whereby a target product, i.e., a hydrogen-form sorbent is obtained. Primary area of use: extraction of lithium from complex natural and technological brines including those, which contain oxidants and reducing agents, as well as radioactive elements.
BRIEF DESCRIPTION OF THE DRAWINGS
[0013]
FIG. 1 is a graph that shows dependence of the capacitance on lithium (ELi) and an effect of the ion separation factor in lithium and sodium (PLi,Na) on the content in the sorbent of zirconium ions.
[0014]
FIG. 2 is a graph illustrating the influence of the heat treatment temperature in the synthesis of the material, on the sorption-selective properties and the chemical stability of the sorption materials obtained.
DETAILED DESCRIPTION OF THE INVENTION
[0015]
The invention relates to the field of chemical technology, namely, to the production of selective inorganic sorbents for the extraction of lithium from natural and technological brines. The invention may be used in the extraction of lithium from alkaline and slightly alkaline solutions with a high content of sodium ions and ions of other metals. In particular, the invention relates to the aforementioned method, which is carried out in the presence of oxidizing or reducing agents and by using ion sieves.
[0016]
The term “brines” used in the context of the present patent specification covers any natural or technological solutions that contain lithium.
[0017]
Ionic sieves are inorganic ion-exchange sorbents that exhibit the so-called ion-sieve effect, which is the effect of separation of ions in a solution in accordance with the difference in their ionic radii. Dimension positions in crystal structure of the material corresponds to certain ions, and ions of a larger size cannot enter unspecified positions. Thus, the ion-sieve effect provides high selectivity in the sieve-effect sorbents. A unique feature of the method of the present invention is that the method makes it possible to obtain inorganic ion-exchange sorbents with a specific structure that provides high selectivity especially to lithium ions.
[0018]
It is also important to note that in the context of the present specification the term “mixed hydrated niobium and zirconium oxide” does not mean a mechanical mixture of the hydrated niobium oxide with a hydrated zirconium oxide but rather means a chemical compound of a non-stoichiometric composition.
[0019]
The objective of the invention is to increase the exchange capacity of the sorbent and its selectivity with respect to lithium ions.
[0020]
The objective is achieved by a method of obtaining an inorganic sorbent for extracting lithium from lithium-containing natural and technological brines. The method consists of contacting soluble niobates (V) with an acid in the presence of zirconium (IV) salts at an atomic niobium/zirconium ratio in the range of 1:(0.1 to 0.7) to obtain a mixed hydrated niobium and zirconium oxide, which is then granulated and subsequently converted into a lithium-form sorbent (hereinafter referred to as a sorbent). The granulation is carried out by freezing the obtained precipitate at a temperature of -5 to -7° C. for 24 to 30 hours with subsequent defreezing.
[0021]
This conversion is carried out by treating the obtained product with a lithium-containing compound selected from the group consisting of a solution of lithium hydroxide LiOH and a solution of lithium carbonate Li2CO3. As a result, a Li-form of a granulated mixed hydrated niobium and zirconium oxide is obtained.
[0022]
The obtained Li-form is calcined at an elevated temperature, specifically at 450÷600° C., the finished product is then treated with an acid solution, e.g., a nitric acid solution, to obtain a target product, i.e., a hydrogen-form sorbent (hereinafter referred to as an H-form sorbent).
[0023]
Soluble niobates suitable for use in the method of the invention are represented by alkali metal orthoniobates, such as Li3NbO4, Na3NbO4, K3NbO4, Rb3NbO4, Cs3NbO4.
[0024]
Zirconium salts suitable for the method of the invention can be exemplified by ZrCl4, ZrBr4, ZrI4, ZrOCl2, ZrOI2, Zr(SO4)2, Zr(NO3)4.
[0025]
Examples of H-form sorbents are given below in Table 1 (the Li-forms are similar and therefore are not included).
[0026]
Uniqueness of the proposed method lies in the fact that the step of contacting a soluble niobate (V) with an acid is carried out in the presence of zirconium (IV) salts and in that the ionic ratio of niobium (V) to zirconium (IV) in their interaction ranges from 1 to (0.1÷0.7). Another feature is that calcination of the precipitate in the Li form is carried out at a temperature in the range of 450 to 600° C.
[0027]
The method is carried out as follows:
[0028]
In the first step, a mixed hydrated niobium (V) and zirconium (IV) oxide is produced by contacting a soluble niobate (V) with an acid solution that contains zirconium salts. To obtain a mixed hydrated niobium (V) and zirconium (IV) oxide, a process of coprecipitation is used. This process is carried out by pouring an acid solution of zirconium salts into a solution of a soluble niobate. For this purpose, solutions of hydrochloric acid, nitric acid or sulfuric acid can be used. To carry out this process, acids may have concentration in the range of 0.5 to 1.0 N. Zirconium compounds may be represented by aforementioned zirconium salts.
[0029]
The step of pouring is accompanied by stirring. The content of the components in the miscible solutions is taken at a level providing a ratio of zirconium (IV) to niobium (V) in the range of (0.1 to 0.7) to 1 and obtaining suspensions with pH=5 to 6.
[0030]
An excess of the resulting electrolyte is washed out from the obtained precipitate of a mixed hydrated niobium and zirconium oxide by successive decantation. The obtained precipitate of the mixed hydrated niobium and zirconium oxide is granulated by freezing, and then the granulated product is defrosted. The step of freezing is carried out for 24 to 30 hours at a temperature of -5 to -7° C. After defreezing, a granular material with a particle size of 0.3 to 1.0 mm is obtained.
[0031]
The resulting granular material is placed in an ion-exchange column and treated with a solution of lithium carbonate or lithium hydroxide at a concentration of 0.05 to 0.1 M until no traces of potassium are found in the filtrate. As a result, a product saturated with lithium ions is obtained. The obtained product is comprised of a lithium-saturated granulate, which is discharged from the column, dried in air, and calcined at a temperature in the range of 450 to 600° C. for 2 to 3 hours. After cooling and transferring to the H-form (by treating with 0.1÷0.2 M HNO3), the obtained ion exchanger is ready for sorption of lithium ions.
[0032]
The above conditions for obtaining the sorbent allow to synthesize an ion exchanger, which has increased chemical stability, high exchange capacity, and efficient selectivity to lithium ions.
[0033]
An optimal ratio between niobium and zirconium in the material is chosen on the basis of the experimental data obtained in studying the dependence of the exchange capacitance of the sorbent on lithium and the separation coefficient for lithium and sodium ions on the content of zirconium ions in the sorbent (FIG. 1).
[0034]
FIG. 1 shows dependence of the capacitance on lithium (ELi) and the separation factor for the ion in lithium and sodium (PLi,Na) on the content in the sorbent of zirconium ions, where n=Zr (IV):Nb (V) is the ionic ratio in the sorbent. In this drawing, curve 1 corresponds to ELi obtained with the use of 0.1 N LiOH. Curve 2 corresponds to ELi obtained with the use of a solution of lithium and sodium salts at ionic ratio Li+:Na+=1:10, pH=12. Curve 3 corresponds to PLi,Na obtained with the use of a solution of lithium and sodium salts at ionic ratio Li+:Na+=1:10, pH=12. The calcination temperature of the samples is 520° C.
[0035]
The obtained data shown in FIG. 1 indicate that the maximum value of the exchange capacity and selectivity to lithium ions is exhibited by materials whose composition corresponds to the ratio of niobium to zirconium in the range of 1 to (0.1 to 0.7).
[0036]
To obtain such a composition, it is necessary to keep the ratio of the hydrated niobium oxide to the hydrated zirconium oxide in the solution the same as prior to mixing. In other words, the entire contents of the niobium and zirconium should transfer to a solid state contained in the precipitate.
[0037]
The optimal conditions needed for heat treatment of the obtained granular material saturated with lithium ions were determined from the experimental data relating to sorption properties of sorbent samples prepared with a Zr (IV) to Nb (V) ratio equal in the solid phase to 0.30:1. The samples were calcined at different temperatures. The results are shown in FIG. 2, which illustrates the influence of the heat treatment temperature in the synthesis of the material on the sorption-selective properties and the chemical stability of the sorption materials obtained.
[0038]
In the drawing, curve 1 corresponds to ELi obtained with the use of 0.1 N LiOH; curve 2 corresponds to ELi obtained with the use of a solution of lithium and sodium salts at ionic ratio Li+:Na+=1:10, pH=12; curve 3 corresponds to PLi,Na obtained with the use of a solution of lithium and sodium salts at ionic ratio Li+:Na+=1:10, pH=12; and curve 4 shows sorbent losses (?m) per 1 work cycle in a solution of lithium and sodium salts at the ionic ratio Li+:Na+=1:10, pH=12.
[0039]
The results of the experiments show that the optimum temperature for calcining the Li-form of the granulated mixed hydrated niobium and zirconium oxide to obtain a granulated mixed lithium, niobium, and zirconium oxide (i.e., a tripled mixed oxide, which is a Li-form of an inorganic ion exchanger) is in the range of 450° C. to 600° C. A time needed to keep the material at this temperature for the formation of the sorbent structure should be in the range of 2 to 3 hours. If heat treatment is carried out under these conditions, the obtained sorbent, which in this case possesses the ion-sieve effect, acquires a maximum exchange capacity and selectivity to lithium ions and is characterized by minimal losses in alternating sorption-desorption cycles.
[0040]
The remaining operations of the proposed method for obtaining the granulated sorbent on the basis of precipitate of a mixed hydrated niobium and zirconium oxide and saturating the granulated material with lithium were carried out under the same conditions as in the method disclosed in the aforementioned article of P. Kudryavtsev, et al. More specifically, the cation exchanger ISN-1 was prepared by precipitation of hydrated niobium pentoxide (GPN) by mixing 0.1 M solutions of potassium niobate and hydrochloric acid, granulating the GPN, saturating the granular product with lithium ions from 0.05÷0.1 M solution of lithium carbonate, and then calcinating the product at 400±25° C. for 2÷3 hours. After calcination and conversion to the H-form (treatment with 0.1-0.2 M nitric acid solution), the sorbent was ready for lithium sorption. The obtained sorbent was suitable for extracting lithium from slightly alkaline solutions in the presence of both oxidizing agents and reducing agents.
[0041]
The effectiveness of the proposed method is illustrated by the examples given below. It is understood, however, that these examples should not be construed as limiting the scope of the invention and that they are given only for illustrative purposes.
[0042]
The following methods and instruments were used for processing the materials and measuring properties of the obtained products mentioned in the subsequent examples.
[0043]
Equipment and Procedures Used in the Method of the Invention
[0044]
Ion-Exchange Column
[0045]
As ion-exchange column used in the method of the invention was a standard chromatographic column with a diameter of up to 10 mm. The height of the sorbent layer was maintained in the range of 10 to 15 column diameters. The solution was fed through the column at a constant linear speed, in the range of 1 to 10 mm/s. The feed rate of the solution was maintained by means of a peristaltic pump. During sorption experiments, special measures were taken to prevent air from entering the sorbent layer and to partially dry the sorbent granules.
[0046]
Determination of the Content of Lithium
[0047]
Determination of lithium in solutions was carried out by the method of emission photometry of a flame. The most intense resonance line in the spectrum of lithium, 670.8 nm, was used for the analysis. This line corresponds to the transition between the energy levels 22S1/2 and 22P0 3/2 at the excitation energy of 1.85 eV. The sensitivity of the method, in determining lithium (with the use of the FLAME PHOTOMETER, FP8000 series device; A. KRÜSS Optronic), was 0.001-0.0005 µg Li/ml. The content of lithium was determined from the calibration based on reference solutions prepared based on pure metal salts and their mixtures present in the solutions under study, which were close in proportion to the test solutions. Determination of sodium content was carried out in a similar way.
[0048]
Determination of the Content of Zirconium
[0049]
Determination of the content of zirconium and niobium in the composition of the investigated sorbent samples was carried out by X-ray fluorescence spectroscopy. The experiments were performed on a VRA-30 spectrometer. The source of excitation was a tube with a tungsten anode, operating at U=30 kV, I=15 mA. A LiF single crystal was used as the analyzer crystal. The registration was carried out using a proportional counter.
[0050]
The Determination of the Content of Niobium
[0051]
The determination of the content of niobium was carried out along the line Ka 1,2 , the sensitivity of the method was 0.05%. Determination of the zirconium content was carried out along the line Ka 1 , the sensitivity of the method was 0.003%. The background in the analysis was taken into account by the method of linear interpolation and by using a blank sample. Samples of materials for X-ray fluorescence analysis were prepared by compressing them in the form of tablets with NaCl (S7653 SIGMA-ALDRICH 99.5% (AT)) at a pressure of 4000 kg/cm2. The instrument was calibrated using samples containing fixed amounts of niobium pentoxide (203920 ALDRICH 99.99% trace metals basis) and zirconium dioxide (230693 ALDRICH 99% trace metals basis).
[0052]
Sorption-Selective Parameters
[0053]
The following characteristics are taken as parameters describing sorption-selective properties: a total exchange capacitance ELi0, obtained by using 0.1 N LiOH solution as a sorbent; a selective lithium capacitance Eli1 used for sorption from a solution of lithium and sodium salts at an ionic ratio Li+:Na+ in the range of 1 to 10 at pH=12; and a coefficient PLi,Na of selectivity of the sorbent with respect to lithium, which is a direct parameter that characterizes separation of lithium from sodium and which is represented by the following formula:
P Li,Na =E Li1 ·C Na /E Na1 ·C Li,
where
[0054]
ELi1 is a selective lithium capacity at sorption from a solution of lithium and sodium salts at ionic ratio Li+/Na+ of 1/10 at pH=12 (mg-eqv/g sorb.);
[0055]
ENa1 is a sodium capacity at sorption from a solution of lithium and sodium salts at ionic ratio Li+/Na+ of 1/10 at pH=12 (mg-eqv/g sorb.);
[0056]
CLi is a molar concentration of Li+ in a solution of lithium and sodium salts at ionic ratio Li+/Na+ of 1/10 at pH=12 (mol/l);
[0057]
CNa—molar concentration of Na+ in a solution of lithium and sodium salts at ionic ratio Li+/Na+ of 1/10, pH=12 (mol/l).
EXAMPLES
Example 1
[0058]
A predetermined amount of 0.05 M solution ZrOCl2 in 1.0 M HCl is poured to 2.0 l of a 0.05 M solution of K3NbO4 (pH=12.7) with a vigorous stirring. The pH of the precipitation process is 5 to 6 (correction with HCl). The resulting precipitate of a mixed hydrated niobium and zirconium oxide is washed by successive decantations to a residual concentration of potassium ions equal to 0.08-0.09 g/l and then frozen at t=-6 C for about 30 hours. The freezing produces a granulated material. After thawing, the granulate is placed in an ion-exchange column, and about 4 l of a 0.1 M solution of Li2CO3 is passed. Next, the precipitate of the mixed hydrated niobium and zirconium oxide is discharged from the column, air-dried, then heated to the desired temperature (with a temperature increasing rate of 10 deg/min; specific temperatures are given below in Tables 1 and 2), and held at this temperature for 3 hours. As a result, a sorbent is obtained, the main fraction of which is a granule with a granule size of 0.2÷0.7 mm.
[0059]
The effect of synthesis conditions in obtaining ion exchanger on its sorption properties is summarized in Table 1. This table presents results of tests of sorbents obtained at various conditions of synthesis but within the scope of the present invention. In the ion-exchange test, a solution of the following composition (g/l) is used: Li2CO3—5.5; NaCl: 53.0; NaOH—3.0 (pH=12.1).
TABLE 1
Influence of synthesis conditions on compositions and properties of sorbents
(synthesis under conditions within the scope of the present invention)
The sorbent obtaining
conditions Test results
Zr(IV): Total
Nb(V) ion Selective Output of the
ration in exchange capacity Li—Na working
solution Treatment capacity by separation fraction
during temperature ELi0, Li, ELi1, coefficient, (0.2 ± 0.7 mm),
synthesis T, ° C. Sorbent composition* mg-eqv/g mg-eqv/g PLi,Na mass %
0.191 520 H0.98NbO2.99•0.191ZrO2 3.39 2.52 48.2 96
0.010 520 H0.19NbO2.59•0.191ZrO2 0.70 0.60 37.3 96
0.053 500 H0.38NbO2.99•0.053ZrO2 1.41 1.14 27.7 94
0.069 400 H0.94NbO2.97•0.069ZrO2 3.41 1.57 20.0 91
0.069 550 H0.39NbO2.69•0.069ZrO2 1.41 1.06 25.0 96
0.103 600 H0.35NbO2.67•0.103ZrO2 1.25 0.89 23.4 97
0.136 470 H0.80NbO2.90•0.136ZrO2 2.85 2.24 28.6 92
0.191 440 H1.04NbO3.02•0.191ZrO2 3.61 2.43 24.0 92
0.191 580 H0.75NbO2.88•0.191ZrO2 2.60 1.67 31.0 97
0.300 470 H1.05NbO3.03•0.300ZrO2 3.48 2.31 29.4 91
0.366 550 H0.91NbO2.96•0.366ZrO2 2.93 1.80 34.1 97
0.450 500 H1.05NbO3.02•0.450ZrO2 3.26 1.90 34.6 94
0.660 470 H1.10NbO3.05•0.660ZrO2 3.17 1.40 21.2 92
0.660 520 H0.91NbO2.96•0.660ZrO2 2.62 1.11 30.8 96
*The composition of the sorbent prepared for sorption of lithium (H-form)
[0060]
Table 2 shows results of tests of sorbents obtained at various conditions of synthesis but beyond the scope of the present invention.
TABLE 2
Influence of synthesis conditions on the composition and properties of sorbents
(synthesis under conditions beyond the scope of the present invention)
The sorbent obtaining
conditions Test results
Zr(IV): Total
Nb(V) ion Selective Output of the
ration in exchange capacity Li—Na working
solution Treatment capacity by separation fraction
during temperature ELi0, Li, ELi1, coefficient, (0.2 ± 0.7 mm),
synthesis T, ° C. Sorbent composition* mg-eqv/g mg-eqv/g PLi,Na mass %
0.269 355 H1.09NbO3.05•0.269ZrO2 3.65 2.22 6.1 85
0.660 625 H0.40NbO2.70•0.660ZrO2 1.15 0.66 7.5 96
0.995 400 H1.20NbO3.10•0.995ZrO2 3.09 1.40 6.9 88
0.995 440 H1.16NbO3.08•0.995ZrO2 2.98 1.20 11.5 90
0.995 580 H0.73NbO2.87•0.995ZrO2 1.89 0.60 14.8 94
*The composition of the sorbent prepared for sorption of lithium (H-form)
[0061]
It can be seen from the presented data that the total exchange capacity of the samples of the sorbents ELi0 synthesized under conditions is 2.58±0.56 mg-eqv/g; the selective lithium capacitance is ELi1 is 1.62±0.35 mg-eqv/g; the coefficient PLi,Na of selectivity of the sorbent with respect to lithium reaches values of PLi, Na=30±4, and its value for the optimum composition (i.e., for the conditions within the scope of the present invention) is PLi,Na=48. For samples obtained outside the range of optimal conditions, these values are ELi0=2.5±1.2 mg-eqv/g, ELi1=1.2±0.8 mg-eqv/g, and PLi,Na=9.4±4.6. These data show that obtaining of the sorbents under optimal conditions produce great results, over both the total exchange capacity and the selective capacity of lithium. The differences between optimal and non-optimal synthesis conditions are reflected especially noticeably on coefficient PLi,Na of selectivity of the sorbent with respect to lithium.
[0062]
The advantages of the sorbent produced by the proposed method over the prototype are given in Table 3. Lithium sorption is carried out from the solution with the above composition. The elution of lithium from the sorbent is carried out with 0.1 N HNO3 solution. The table shows average results for 5 cycles of sorbent operation.
Example 2
[0063]
To compare the properties of the sorbents prepared by the method of the invention and conventional methods, weights of sorbents (50 g each) are placed in ion exchange columns with parameters of 3.2 cm2×30 cm. Sorption is conducted from a solution containing (g/l): Li2SO4—5.5; NaCl—56.0; NaOH—3.0; pH=12.1.
[0064]
Tests of sorbents are carried out in the following sequence. The sorbents are loaded into columns and treated with solutions of HNO3 at concentration of 0.2 mol/l. The columns are then washed with water until the reaction of media became neutral, and lithium is sorbed from the solutions of the above compositions (filtration rate: 40-60 ml/h, flowing volume: 1500-1600 ml). After sorption of lithium, the columns are washed with water (300-400 ml), and ion exchangers are regenerated under the action of 0.1-0.2 mol/l of HNO3. At the regeneration stage, the filtration rate is maintained at about 100 ml/h, and 800-900 ml of the solution is passed. After completion of regeneration, the columns are washed with water until the media become neutral, and a new lithium sorption cycle is started. In total, during the tests, five sorption/desorption's cycles are conducted. The averaged test results are shown in Table 3.
TABLE 3
Sorbent Test Results with Model Solutions
Exchange capacity, Li—Na Losses per Column
mg-eqv/g separation one working Treated
Sorbent ELi1 ENa1 coefficient, PLi, Na cycle, % Volumes
According to 2.45 ± 0.20 0.35 ± 0.03 49 ± 5 1.8 95 ± 8
the invention
Conventional 1.42 ± 0.20 0.36 ± 0.04 38 ± 6 2.1 51 ± 7
[0065]
As can be seen from Table 3, the sorbent obtained according to the proposed method has sorption-selective characteristics and chemical stability more than two times higher than the sorbent obtained by the known methods.
[0066]
In the second series of tests, experiments are conducted for testing a synthesized sorbent by sorption from a natural underground brine of high mineralization. The brine has the following composition (g/l): Li+—0.013; Na+—76.0; K+—2.7; Mg2+—3.8; Ca2+—19.5; NH4 +—0.13; Cl-—154; Br-—0.7; I-—0.01; SO4 2-—0.12; HCO3 -—0.07; pH=8.7. Prior to desorption, the sorbent is washed with a 0.1M NH4Cl solution to remove salting-out alkaline earth ions. The desorption is conducted with a solution of 0.1N HNO3.
[0067]
Comparative data on the characteristics of sorbents obtained by the known and proposed methods are presented in Table 4.
TA?
Figure US20190184373A1-20190620-P00001
?4
Sorbent Test Results on Real Natural Brines
Exchange capacity, Li—Na Losses per Column
mg-eqv/g separation one working Treated
Sorbent ELi1 ENa1 coefficient, PLi, Na cycle, % Volumes
According to 2.55 ± 0.15 0.33 ± 0.08 (1.4 ± 0.2) · 104 1.1 4200 ± 200
the invention
Conventional 0.87 ± 0.11 0.18 ± 0.02 (0.9 ± 0.1) · 104 1.3 1800 ± 200
[0068]
The technical and economic advantages of this method in comparison with the base object (the prototype method) are the following:
[0069]
increase in the sorption capacity for lithium and the selectivity of the sorbent to this metal in 1.8÷2.0 times; and
[0070]
20-25% improvement in the operating properties of the sorbent by reducing its losses in repeated cycles of sorption and desorption.
[0071]
Thus, it has be shown that the sorbent obtained by the method of the invention is suitable for industrial production of lithium by extraction from complex natural and technological brines.
[0072]
The method of the invention for obtaining inorganic sorbents for extracting lithium from natural and technological brines was described with reference to specific examples of compositions and technological steps. It is understood, however, that these compositions and process steps were give only as examples and that any changes and modifications are possible within the scope of the attached patent claims. For examples, the units of the synthesis equipment may vary, depending on specific conditions. The brines may be taken from different sources. The sorbents obtained by the method of the invention may find different applications, and the synthesis of the sorbents can be conducted at different temperatures selected according to specific conditions. Various acids can be used in the method.
Claims (20)
Hide Dependent
1. A method of obtaining inorganic sorbents for extracting lithium from lithium-containing natural and technological brines, the method comprising the steps of:
contacting a soluble niobate (V) with an acid in the presence of at least one zirconium (IV) salt to obtain a precipitate of a mixed hydrated niobium and zirconium oxide, which is a non-stoichiometric compound;
granulating the obtained precipitate of a mixed hydrated niobium and zirconium oxide by freezing with subsequent defreezing to obtain a granulated mixed hydrated niobium and zirconium oxide;
converting the obtained granulated mixed hydrated niobium and zirconium oxide into a Li-form of the granulated mixed hydrated niobium and zirconium oxide by treating the granulated mixed hydrated niobium and zirconium oxide with a lithium-containing compound selected from the group consisting of a solution of lithium hydroxide LiOH and a solution of Li2CO3;
calcining the Li-form of the granulated mixed hydrated niobium and zirconium oxide to obtain a granulated mixed lithium, niobium, and zirconium oxide, which comprises a tripled mixed oxide, which is a Li-form of an inorganic ion-exchanger; and
converting the obtained granulated mixed lithium, niobium, and zirconium oxide to an ion-exchanger in an H-form by treating the granulated mixed lithium, niobium, and zirconium oxide with an acid solution.
2. The method of claim 1, wherein the step of contacting a soluble niobate (V) with an acid in the presence of at least one zirconium (IV) salt is carried out with an ion ratio of niobium (V) to zirconium (IV) in the soluble niobate and at least one zirconium (IV) salt, respectively, is in the range of (1 to 0.1) to (1 to 0.7).
3. The method according to claim 1, wherein the soluble niobate (V) is an alkali metal orthoniobate.
4. The method according to claim 3, wherein the alkali metal orthoniobate is selected from the group consisting of Li3NbO4, Na3NbO4, K3NbO4, Rb3NbO4, and Cs3NbO4.
5. The method according to claim 2, wherein the soluble niobate (V) is an alkali metal orthoniobate.
6. The method according to claim 5, wherein the alkali metal orthoniobate is selected from the group consisting of Li3NbO4, Na3NbO4, K3NbO4, Rb3NbO4, and Cs3NbO4.
7. The method according to claim 1, wherein the at least one zirconium (IV) salt is selected from the group consisting of zirconium (IV) oxychloride ZrOCl2, zirconium (IV) tetrachloride ZrCl4, zirconium (IV) oxysulfate ZrOSO4, and zirconium (IV) sulfate Zr(SO4)2.
8. The method according to claim 5, wherein the at least one zirconium (IV) salt is selected from the group consisting of zirconium (IV) oxychloride ZrOCl2, zirconium (IV) tetrachloride ZrCl4, zirconium (IV) oxysulfate ZrOSO4, and zirconium (IV) sulfate Zr(SO4)2.
9. The method of claim 6, wherein the at least one zirconium (IV) salt is selected from the group consisting of zirconium (IV) oxychloride ZrOCl2, zirconium (IV) tetrachloride ZrCl4, zirconium (IV) oxysulfate ZrOSO4, and zirconium (IV) sulfate Zr(SO4)2.
10. The method according to claim 1, wherein the step of freezing is carried out at a temperature in the range of -3° C. to -10° C. during time from 20 hours to 40 hours.
11. The method according to claim 6, wherein the step of freezing is carried out at a temperature in the range of -3° C. to -10° C. during time from 20 hours to 40 hours.
12. The method according to claim 8, wherein the step of freezing is carried out at a temperature in the range of -3° C. to -10° C. during time from 20 hours to 40 hours.
13. The method according to claim 1, wherein the step of converting the obtained granulated mixed hydrated niobium and zirconium oxide into a is carried out with concentration of the lithium-containing compound in the rage of 0.05 M to 0.2 M.
14. The method according to claim 2, wherein the step of converting the obtained granulated mixed hydrated niobium and zirconium oxide into a is carried out with concentration of the lithium-containing compound in the rage of 0.05 M to 0.2 M.
15. The method according to claim 9, wherein the step of converting the obtained granulated mixed hydrated niobium and zirconium oxide into a is carried out with concentration of the lithium-containing compound in the rage of 0.05 M to 0.2 M.
16. The method according to claim 1, wherein the step of calcining the Li-form of the granulated mixed hydrated niobium and zirconium oxide to obtain a granulated mixed lithium, niobium, and zirconium oxide, which comprises a tripled mixed oxide and is a Li-form of an inorganic ion-exchanger, is carried out at a temperature in the range of 450° C. to 600° C.
17. The method according to claim 2, wherein the step of calcining the Li-form of the granulated mixed hydrated niobium and zirconium oxide to obtain a granulated mixed lithium, niobium, and zirconium oxide, which comprises a tripled mixed oxide and is a Li-form of an inorganic ion-exchanger, is carried out at a temperature in the range of 450° C. to 600° C.
18. The method according to claim 9, wherein the step of calcining the Li-form of the granulated mixed hydrated niobium and zirconium oxide to obtain a granulated mixed lithium, niobium, and zirconium oxide, which comprises a tripled mixed oxide and is a Li-form of an inorganic ion-exchanger, is carried out at a temperature in the range of 450° C. to 600° C.
19. The method according to claim 1, wherein an acid used in the step of converting the obtained granulated mixed lithium, niobium, and zirconium oxide to an ion-exchanger in an H-form by treating the granulated mixed lithium, niobium, and zirconium oxide with a solution of acid, is selected from the group consisting of a hydrochloric acid, nitric acid, and sulfuric acid.
20. The method according to claim 9, wherein an acid used in the step of converting the obtained granulated mixed lithium, niobium, and zirconium oxide to an ion-exchanger in an H-form by treating the granulated mixed lithium, niobium, and zirconium oxide with a solution of acid is selected from the group consisting of a hydrochloric acid, nitric acid, and sulfuric acid.
Similar Documents
Publication Publication Date Title
Turcotte et al. 1969 Rare earth dioxymonocarbonates and their decomposition
Ferraro et al. 1966 Comparison of the Infrared Spectra of the Hydrates and Anhydrous Salts in the Systems UO2 (NO3) 2 and Th (NO3) 4
Swain 2017 Recovery and recycling of lithium: A review
Li et al. 2008 Formability of ABX3 (X= F, Cl, Br, I) Halide Perovskites
Stern et al. 1959 Ionic size
Jehng et al. 1991 Structural chemistry and Raman spectra of niobium oxides
Aydinol et al. 1997 Ab initio calculation of the intercalation voltage of lithium-transition-metal oxide electrodes for rechargeable batteries
Navrotsky 2001 Thermochemistry of nanomaterials
JP4094689B2 2008-06-04 Preparation of a composite oxide having oxygen absorption desorption capability
Bach et al. 1991 Birnessite manganese dioxide synthesized via a sol—gel process: a new rechargeable cathodic material for lithium batteries
US6280693B1 2001-08-28 Composition for the recovery of lithium values from brine and process of making/using said composition
CA2478698C 2012-05-29 Process for making nano-sized and sub-micron-sized lithium-transition metal oxides
Shen et al. 1986 Phase transitions and ion exchange behavior of electrolytically prepared manganese dioxide
Ochsenkühn-Petropulu et al. 1995 Selective separation and determination of scandium from yttrium and lanthanides in red mud by a combined ion exchange/solvent extraction method
CN102046536B 2014-05-07 Process for producing lithium titanium spinel
Gruen et al. 1959 Oxidation states and complex ions of uranium in fused chlorides and nitrates
Boulineau et al. 2013 First evidence of manganese–nickel segregation and densification upon cycling in Li-rich layered oxides for lithium batteries
Chitrakar et al. 2000 A New Type of Manganese Oxide (MnO2? 0.5 H2O) Derived from Li1. 6Mn1. 6O4 and Its Lithium Ion-Sieve Properties
Xue et al. 1992 Influence of additives on the ?-to-a transformation of alumina
Clearfield et al. 1991 Intercalation of dodecyl sulfate into layered double hydroxides
Breu et al. 2001 Charge homogeneity in synthetic fluorohectorite
Armstrong et al. 2010 Lithium Coordination Sites in Li x TiO2 (B): A Structural and Computational Study
Cheng et al. 2015 Interrelationships among grain size, surface composition, air stability, and interfacial resistance of Al-substituted Li7La3Zr2O12 solid electrolytes
Chirayil et al. 1998 Hydrothermal synthesis of vanadium oxides
Yuan et al. 2015 Asynchronous crystal cell expansion during lithiation of K+-stabilized a-MnO2
About Send Feedback Public Datasets
bigwilly likes batteries and double chocolate pancakes and watermelon with extra salt bigwilly
ho ho ho TSNP no online store but who knows what could happen ho ho ho can't wait to drink me some chocolate milk and some ho ho hos
ho ho ho why not? if it is related to hcti r u saying it no longer means anything to hcti?? ho ho ho looking back at some of your post you have posted the same ho ho ho roast beef and chicken salad for bigwilly for lunch
ho ho ho no bigwilly going to eat some fried chicken mashed potatoes watermelon with some onion rings and chocolate german cake with a side of vanilla icecream ho ho ho
i bigwilly does not own this stock bigwilly going to eat another lunch soon bigwilly seen this has no online store after dd
bigwilly is bummed out should have bought some extra cheese with my 75 bucks instead of hcti shares i love cheese cheese its good
bigwilly heard and read a lot of good things about this company bigwilly thinks none of it is true now bigwilly going to eat extra food today bigwilly going to eat a lot of cake and drink a lot of coca cola
bigwilly woke up hungry and notice hcti not even on linkedin any longer bigwilly going to eat another breakfast
thanks for the heads up bigwilly appreciates it hope you enjoy your dinner
bigwilly thanks you for the sharing your thoughts. enjoy your dinner
wasnt this one supposed to go through an rs?
yes sometimes i think my sugar goes up and i fall asleep just about anywhere. have you heard anything about hcti lately?
bigwilly woke up from his slumber and got hungry there are some holding a lot of pounds of shares
hcti twitter deleted facebook deleted website dont work ho ho ho company running from something
bigwhilly gets on twitter and sees the pretty girls and noticed the twitter account does not work anymore time for another lunch bigwilly likes the debbie cakes
i like how joseph has taken control of the company and got rid of that blabbermouth darin sent him to the curb that guy ruined hcti darin nellis sales department he couldnt sell a tuna salad to a fish ho ho ho bigwilly needs to back and eat another breakfast
i find it very funny and you can't stop bigwilly from having a big chuckle cause when bigwilly chuckles it is a wave of fun let bigwilly give you a hug cause someone needs it ho ho ho bigwilly thinks joseph kirstul is a great ceo ho ho ho