Replies to post #21596 on Plastic2Oil Inc (PTOI)

[dipinvester]

Shorting JBII, aye?

[ashkelon]

FWIW the replies you are receiving come from a few things.

1. You just joined today and this is your first post which shows that:
2. You haven't read through the iBox
- Most, if not all, of the answers you seek are in the iBox which not only includes detailed information on all things going on but also a recap of Facebook posts and other comments from JB, the CEO, where he has talked about your tire question to no small extent
3. According to the company, this has been said by them before, the large processor will put out the same quality and type of fuel that the small processor did.

Number 3 is the only place that I have any sympathy from you. Many of us, ok all of us, have been waiting on the validating company to finish their work for months now. We also have been waiting on the large processor to be completed for months. Needless to say we all must just wait a little while longer. Many of us, myself included, have been assured either by JB or the IR guy that in February there will be a media even showing off the large processor and that everything works as planned.

Again though you would know this if you had bothered reading anything in the iBox, the stickies hot post, or even the last few days worth of posts.

Cheers.

[rth]

Here's a clue:

1 - Wrong they never said that in a PR

2 - same process

3 - Wrong 99% was never stated.

Tires, waste info is in the ibox

[Zardiw]

I believe the big machine is 'complete'. What we are waiting on is 'validation' of the construction process and the output to facilitate later installations. Everything will be documented, so that any paper work, such as permits etc will have an easier go of it.

The percentages refer to plastic input. Unsorted, unclean plastic. They're not going to be feeding anything else into the machine...hence the 99% fuel output.

As far as tires go, they are not going for the fuel output on that, but the other elastomeric chemicals in tires that can be sold for around .80/lb I believe. At any rate, tires are down the road aways from what I gather.

Bottom line is that our CEO is a very brilliant man, and I'm sure that any issues have been, or will be addressed.

Considering his reputation, it's obvious that he thinks it will all work. I tend to believe him......z