Not only that, but if amspec in conjunction with usse has jointly formulated a "new" biodiesel, then we have a JV arrangement with amspec,and so they are now "partners" in a new venture. As such, we will have access to all amspec clientele when they offer their "new" biodiesel.
Here is the latest list of "The Rivera Process" qualities and mostly unique properties. Not necessarily in order of importance, not all inclusive, subject to change via new additions. As of August 20.
1.) Low Cost - Less than $1 per Gallon to produce (soybeans @ $6 bushel), other Biodiesels on market about $2.50.
2.) High Yield (Quantity) - 5 Gallons of USSE BioFuel per bushel of soybeans. Compared to 1.5 gallons of regular biodiesel.
3.) Faster Yield (Process Time) - 8.5 minutes per batch!! Compared to 24 hours for other biodiesel.
4.) Higher Heat Output - Heating value of 128,000 BTU per gallon, on par with regular diesel. Biodiesel typically has a heating value of 118,000 BTU per gallon; premium gasoline has about 116,000 BTU per gallon.
5.) No engine retrofits needed - USSEC biofuel can be used at 100 percent in diesel engines and with a 50/50 blend for gasoline engines without retrofits or modifications. Its lower viscosity eliminates the formation of gum residues on engine parts that has been a problem with traditional biodiesel fuels, requiring them to be blended with petroleum fuels.
6.) Highly Miscible - Until now, greater than 15% ethanol and diesel was just like oil and water that do not mix (almost limitless combinations of mixtures).
7.) End result < 1% water. Unheard of from Pyrolysis, others contain from 15 to 30 % water.
8.) Produces 3 Components: a) Liquid BioFuel b) Carbon Ash c) BioGas