Register for free to join our community of investors and share your ideas. You will also get access to streaming quotes, interactive charts, trades, portfolio, live options flow and more tools.
Register for free to join our community of investors and share your ideas. You will also get access to streaming quotes, interactive charts, trades, portfolio, live options flow and more tools.
With the growth that we are expecting with CKYS, a conservative PE of 20 would easily be warranted.
I agree that with government contracts in hand and the rigid constraints regarding approvals of government purchases, CKYS' financial will probably be very close to the previously PR'd unaudited EPS of .027.
A simply PE of 20 equates to a price of .54. Let's remember, though, that this reported EPS is only for 6 months. Should the earnings stay flat for the next 6 months, we would then expect to estimated earnings of .054.
Once again, using a PE of 20, well you do the math. I do not believe that I am very far off in what we will be seeing in the near future.
I would venture to say that with what we are witnessing as to pending contracts, etc., we will see a far greater growth rate than flat! If CKYS' anticipated revenues become a reality over the next few quarters, this may be one superb ride.
Will the shares trade down to cheaper levels from here? Nobody knows. But if the above mentioned scenario plays out anywhere close to that, why take the chance of being out of the stock at these levels.
See you all on the boards tomorrow. GLTA!
Bly and Gordon and BiPhase,
I also appreciate your posts, as everyone knows I am no expert in automotive or machinery. I learn more with each post. If there is something that I do not understand, I begin to do a little more DD in an attempt to be better informed of what you guys are posting about.
Keep the dialogue coming. Thanks!
And your response was....?
It's a pretty high handle, but we can probably live with it. I'll let you know in a week or two it we are up or down from here! LOL
Yes, and that was when I was buying at .0105, .011, .013, and again at .0155. Haven't received any since, although I have been addding all the way up to .022 last week. Hope to add another 500k this week. I am beginning to think that time is running out for cheap shares.
If the shorters were in fact shorting when they first contacted me at .0105, then they are taking a haircut at the moment. Can't wait to see how things play out over the next couple of months!
Should be fun! Well, for longs anyway!
She always looks stunning to me! 26 years and going strong! But she still isn't ready. Another 5 minutes she says. Good thing our reservations aren't until 8:00 tonight.
Brent!
Man, my wife better hurry up and get ready. She is taking forever to get ready. Can you tell? Way to much time on my hands tonight. We'll be eating at Cannon's tonight overlooking the Dana Point Harbor.
I just called him for you. He said he only has Borsch on the menu thru Monday. He said you will have to call Domino's, unless you want a cabbage and beet pizza!
Let me know.
Guido is my Italian friend. I'll give you Boris' number. 1-800-BUY-GBDX! :)
Close, but I think you also need to add some AXGC, fast. Looks great! GBDX? Looks good also! Other than SVMI, IHDR, AXGCm and GBDX, you may be right. I don't own the others you mentioned, but AURC and CDCH have been on my radar for some time now. Just have to shake some funds lose, but no way I am selling any of my holdings now. To many retention funds from my construction jobs outstanding, and the projects aren't paying as quickly as they should. Should be a different story around the 15th!
RedCloudPaint,
Hey, the Horse told me to buy the first time around at .007. I didn't, and it kicked me in the heas. So you know the old saying, "It Was The Horses Fault!" The second time the Horse told me to buy at .105....Well you know! That would have been my fault! :)
Las Vegas isn't quite half way for me (about 4.5 hours) but I know some killer restaurants there. Great place for a celebration!
Hey, come to think of it, we might be celebrating any one of six or seven of our future winners!
It's like Brikk said earlier! The Horse sees all. The Horse obviously sees and knows a lot more than Shorty!
Good Evening Brent,
Added some SLJB myself on Friday. Congrats! Time will tell, but I have a feeling that we may have skinned a few cheapy shares down there at .095 - .10. Can you spell $4 to $6 in maybe three or fours months?
Good Eveing RedCloudPaint!
Ahhh! I can smell the delicious aroma of a wonderful Texan dinner in the air! :)
Can You?!
Might be an early week surprise in store for us! We'll see.
Hello Brikk,
Agreed, but if you look at CKYS now, it's still really cheap! Nothing wrong with this price, unless you only have a day or two investment horizon.
Hi Guys!
Just got in from a lovely day of Saturday construction on a lovely SoCal day.
Just getting caught up on a few posts and wanted to state that I also have received an email or two since posting here a few weeks back. I've been PM's of the offshore trusts that are trading here and shorting, shorting and shorting more. I was warned about this since I first invested here at .011 and .0115. Am told I was going to be wiped out and can't survive against these type of investors. I was a friendly warning as I appeared to them to be a nice guy from reading about my postings of other boards. How nice of them to help me. I did answer and asked for advice as to how to play this, but never got a response.
Well, now the share price has more than doubled for me. I guess I am not smart to heed that advice, because as RedCloudPaint and a few others know, I keep adding and adding. Not rich yet, but when CKYS comes through for us all, I will be one happy Blockman!
Is it just me, or does there appear to be an agenda from those "friendly" warnings that a few of us are receiving?
Re Post #6170.....
Does he mean "Subsequent"? Or is there such a word as "Sunsequent"? I thought I was the only one that can't spell. Hey, I just thought of this. Is TW trying to take my "scary" title away? He just gave me that award last week! Oh well, it is past Halloween. "Turkey" title is up for grabs next. Coming close to Thanksgiving you know.
I will haf to brush up on me speling so I cans git that titel!! :) :) :)
Oh well, first attempt with a mini videocam. Next trip will get better and quite a bit more clear and detailed. This was more just to show the doubters that there really is a site with machinery. The one with the overhead crane is probably the best of the five. Hopefully, I'll have some replacements in two to three weeks. I may have to fly to Europe and the Philippines again during that time, and if so, I'll let you know when my next visit is.
Good Post FAU,
And here is a good response, "Call the company a have them answer them to your comfort level." They are very open. The gentleman who could answer those questions for you is there everyday. His business card was posted by Moose a couple of days ago. Allow yourself to do a little DD on your own.
I can't answer any of your concerns as my knowledge of vehicles is extremely limited. When my trucks break down it is a breakdown. When I kick them, and they still don't work, it is a major breakdown!
Very strange as she emailed it to me, and all the videos played on my Mac. She has a PC and they also worked on hers. Don't ask me how they work or why not. I really have no clue. It looks like you only got most of the blurry ones.
Thanks for you help anyway.
Hey Guys...
Now that Halloween is over, what can I do to stay scary other than mispell a few words? I don't want to do that anymore because Kerry might send me to Iraq tomorrow. Not that I wouldn't be honored to serve along with the best forces in the world!
You are welcome, but I sure wished it would have stayed down a little longer. I have a feeling, she may come back down again.
Did you also receive the Windows Movie Maker which had all the video clips on it? My daughter emailed it to you.
We sent 22 pictures. I thought a few more would have turned out a bit better than a few of them yesterday. Oh well, I'll do better in two weeks. Some of the equipment and machinery should be placed around the perimeter by then. Only a couple were placed as off yesterday.
I will also attempt to label a few as to what the actually might do when in operation. I was told of a couple that could, if calibrated to do so, put out as much as 10,000 units (parts-not Dynos) per day.
Hello Moose,
Any of the more in-focus pictures turn out. And any word on those videos? Not all, you just take the pick of what you think looks best.
Hi Board,
I was asked to copy and post my earlier post on the SVMI Board. I will make it a point to post more often as it appears we have a little more interest in SaviCorp than I thought we had.
Posted by: blockman
In reply to: None Date:11/1/2006 5:34:46 PM
Post #of 6048
OK, Let's see....7 phone calls, six PM's, and 11 e-mails. Here goes:
1. No, I do not know why the stock went up today.
2. Yes, I spoke with the company, and they do not know.
3. No, there are no pending PR's that I am aware of.
4. No, I am not celebrating. I am rather, a bit disappointed as I wanted another 2-3 million under .007.
5. Yes, it probably will retrace a little imo.
6. No, I don't know if this is Cornell. I seriously doubt it.
7. Yes (again) I don't think we will see any production prior to April-ish.
8. Yes, although I am not a machinist, am told these machines are more than capable of producing all the parts for the Dynos, and more.
9. Yes I do believe the new management knows what they are doing. (That was really an unnecessary question, but I answered you anyway).
10. Congrats are not necessary, as it is way too soon, and we have a long way to go.
11. No, I have no idea how SaviCorp is going to take care of the Cornell problem.
OK, I believe I answered every message, including the many duplicated ones. I don't seem to know much though.
Maybe I need to call John Kerry and ask him if he knows of any openings in Iraq.
:) :) :)
Wait, I do know who bought today....
Berrybck, come on now, come clean. You were knocking the stock down so you could buy low, right?! LOL
OK, Let's see....7 phone calls, six PM's, and 11 e-mails. Here goes:
1. No, I do not know why the stock went up today.
2. Yes, I spoke with the company, and they do not know.
3. No, there are no pending PR's that I am aware of.
4. No, I am not celebrating. I am rather, a bit disappointed as I wanted another 2-3 million under .007.
5. Yes, it probably will retrace a little imo.
6. No, I don't know if this is Cornell. I seriously doubt it.
7. Yes (again) I don't think we will see any production prior to April-ish.
8. Yes, although I am not a machinist, am told these machines are more than capable of producing all the parts for the Dynos, and more.
9. Yes I do believe the new management knows what they are doing. (That was really an unnecessary question, but I answered you anyway).
10. Congrats are not necessary, as it is way too soon, and we have a long way to go.
11. No, I have no idea how SaviCorp is going to take care of the Cornell problem.
OK, I believe I answered every message, including the many duplicated ones. I don't seem to know much though.
Maybe I need to call John Kerry and ask him if he knows of any openings in Iraq.
Also been doing a little DD at the SaviCorp plant in Calif. You can find a few generic updates from me at the SVMI Board. Another monster in the making. Do not let Cornell scare you off though!
Take Care
Actually at 159,189. Can't seem to get rid of that stupid odd lot.
Still here, and still holding. Did sell a few. Still have a few more than is listed. Wished I more money though. No new projects other than my TAD plants, which we hope to break ground on in the first quarter of '07. Not a public company though, and have no intention of going public either.
Right now no one is bashing or degrading our private company. I like that very much!
The Jan "kickoff" is what the company is basically calling the "opening ceremonies" of the company. The name change from Savi Media to SaviCorp will officially take place. IMO this event will be used as the "introduction" of the DynoValves to the public. Some big names are expected to be invited. I am hearing, and have heard earlier, it will be attended by Schwarzenegger and Haig. Am told that it will still happen towards the end of January.
Once again, this event is not to be confused with actual production at that facility. Lots of things still need to be complted and will happen as theye get closer to the January date.
Yes, many thanks to Moose. I'm doing the easy work. He's doing the hard work in getting the pics posted! I have no clue how to do that.
Additionally, the name change to SaviCorp will be officially take place with the January kickoff.
Hello Everybody and Belated Thanks for the Welcomes!
Here is a post that I wrote on the SVMI Board this PM. Although quite a bit of risk still, this company should be followed now. I do have a small position and try to add a little every week or two. I am not an engineer, mechanical or otherwise, not a machinery expert, nor an automotive expert by any stretch of the imagination. But I do visit most every company that I invest in. Two weeks ago, I flew to Mobile, Alabama to investigate Internal Hydro (IHDR). I wanted to make it to CyberKeys (CKYS) last week, but Brent was nice enough to take his valuable time and visit the company for me, even though he wasn't even a shareholder. I have made six visits to SaviCorp (formerly Savi Media) since the end of August. I may be wrong on this one, but imo I have potential huge homerun in my hands.
I have to apologize, though, with my generic and soft information. I signed a NDA last week, so there will be no specific answers to questions unless they are permissible by the agreement and/or company.
See you on the boards!
Answers to PM's and e-mails:
Yes, it appears the "Grand Opening" of SaviCorp will happen in late Jan. Now please do not confuse this with production. As I have stated numerous times, it looks like production will occur closer to April. Things are moving forward, but at a very precise and defined rate. There are many new things that I learned today during my lengthy visit. On a couple of the pictures (although a bit blurry) you can see the electrical conduit running down the walls of the warehouse which, of course, are being used to electrify the various pieces of equipment and machinery. The overhead cranes (yellow units) are operating and being used to place the heavy machinery in their appropriate positions along the perimeter of the two large rooms.
No, I was not allowed to take any pictures of the DynoValves that are currently being tested. The only reason for this is that htey are being tested on C.E.E. premises, and they would simply not allow it. And yes again, I did view them being tested on my visit last week.
I realize that most of what I have posted is very generic information. I can not go into detail, but imo the company is making great strides in all the right directions. If one was only able to view what is really necessary and required by the C.E.E. in order to get just one type of DynoValve approved, it would open ones eyes.
The Dynos for the gas have gone through all of the testings. Currently, the diesel Dynos are being put through the same vigorous and lengthy tests. Remember, 1,000 hours minimum prior to receiving certification and approval by C.E.E.
As to China. They are awaiting the same results as SaviCorp is. That is, they are also waiting for the C.E.E. Once Savi gets the results from the current rounds, the Chinese are expected to move very quickly.
I asked if any results are available yet from the current testing. Only that Savi is very pleased and encouraged from the early results. Many more hours to go though. Testing just began last week on the International.
I believe that covers most all of the PM's and e-mails. If I missed any, I apologize. Please let me know, and I will get to them tomorrow. Additonally, a few of your questions were forwarded to SaviCorp for appropriate responses as I do not know the answers. I am not a mechanic nor machine operator, but I am one heck of an education. I'm going to have to book me a room at a Holiday Inn Express soon, as to rest my over loaded brain!
Take Care
Yep, That's what he means, and I shared that opinion!
Sorry FLS,
I was writing a lengthy post. Read on. I don't know what happened to all the pix and videos forwarded to Moose.
Moose?...See you tomorrow.