Register for free to join our community of investors and share your ideas. You will also get access to streaming quotes, interactive charts, trades, portfolio, live options flow and more tools.
Register for free to join our community of investors and share your ideas. You will also get access to streaming quotes, interactive charts, trades, portfolio, live options flow and more tools.
Hold your horses first it’s the smart cities, then if that fails we will focus
On that.
I agree and forget TVs it’s a waste of time. It’s all about smart cities now.
That’s where the money’s at.
Maybe Stevie will surprise his valued investors and ex employees finally in this 10k!
Focus Graphite Introduces Its New “Superfine Grade” of Coated Spherical Graphite for Lithium Batteries to the International Battery Industry
Share1Print
October 10, 2017 13:56 ET | Source: Focus Graphite Inc.
photo-release
SEM of Purified Lac Knife Flake Graphite
SEM of Purified Lac Knife Flake Graphite
SEM of Purified Lac Knife Flake Graphite
Focus Graphite Inc.
Figure 1. INITIAL GALVANOSTATIC CHARGE-DISCHARGE CURVES FOR SUPERFINE GRADE OF COATED SPG D50 = 11.9µm
Figure 1. INITIAL GALVANOSTATIC CHARGE-DISCHARGE CURVES FOR SUPERFINE GRADE OF COATED SPG D50 = 11.9µm
Figure 1. INITIAL GALVANOSTATIC CHARGE-DISCHARGE CURVES FOR SUPERFINE GRADE OF COATED SPG D50 = 11.9µm
Focus Graphite Inc.
SEM of Superfine Grade of Lac Knife Spherical Graphite
SEM of Superfine Grade of Lac Knife Spherical Graphite
SEM of Superfine Grade of Lac Knife Spherical Graphite
Focus Graphite Inc.
Figure 2. PARTICLE SIZE DISTRIBUTIONS OF SUPERFINE, FINE AND STANDARD GRADES OF LAC KNIFE SPG
Figure 2. PARTICLE SIZE DISTRIBUTIONS OF SUPERFINE, FINE AND STANDARD GRADES OF LAC KNIFE SPG
Figure 2. PARTICLE SIZE DISTRIBUTIONS OF SUPERFINE, FINE AND STANDARD GRADES OF LAC KNIFE SPG
Focus Graphite Inc.
Table 1. COMPARISON OF THE ELECTROCHEMICAL PERFORMANCE OF THREE GRADES OF LAC KNIFE SPHERICAL GRAPHITE (SPG)
Table 1. COMPARISON OF THE ELECTROCHEMICAL PERFORMANCE OF THREE GRADES OF LAC KNIFE SPHERICAL GRAPHITE (SPG)
Table 1. COMPARISON OF THE ELECTROCHEMICAL PERFORMANCE OF THREE GRADES OF LAC KNIFE SPHERICAL GRAPHITE (SPG)
Focus Graphite Inc.
OTTAWA, Oct. 10, 2017 (GLOBE NEWSWIRE) -- Focus Graphite Inc. (TSX-V:FMS) (OTCQX:FCSMF) (FSE:FKC) is pleased to announce the introduction of a Superfine Grade of coated spherical graphite product sourced from its Lac Knife Graphite Project at Fermont, Quebec.
The Company’s manufacturing accomplishment was achieved under the direction of Dr. Joseph Doninger, Focus’ Director of Manufacturing and Technology, and follows the Company’s original May 27, 2014 announcement of the development of its premium standard (medium) and fine battery grades, and; its subsequent August 8, 2016 announcement of the successful purification of Lac Knife’s fine grade material to 99.99% purity which is shown in the following Scanning Electron Microscope (SEM) photomicrograph of a flake of purified Lac Knife graphite.
A photo accompanying this announcement is available at http://www.globenewswire.com/NewsRoom/AttachmentNg/19dd47dc-41c8-4ce1-b62a-2db97d76a1ae
Focus Graphite’s new Superfine Grade graphite product development was first presented to the 34th International Battery Symposium (IBS) in Fort Lauderdale, Florida, by Dr. Doninger on March 21, 2017.
Highlights include:
Market introduction of Focus’ first Superfine coated spherical graphite
Enlarges Company’s potential customer base
Expands Focus Graphite’s value-added product range
Focus Graphite’s development and introduction of a Superfine Grade to the battery market represents a milestone in the Company’s ongoing efforts to continuously improve its products to meet industry demands and are intended for use in various lithium-ion battery applications. The first cycle Galvanostatic curves in Figure 1 show that the new Superfine Grade of spherical graphite has a very high reversible capacity of 360 mAh/g and low first cycle loss of only 1.19%.
An infographic accompanying this announcement is available at http://www.globenewswire.com/NewsRoom/AttachmentNg/16fab8d7-641a-4f69-8050-dd479b12f773
Dr. Doninger said the main benefit of the Superfine Grade is based upon the physical reality of the graphite’s performance within the anode of a lithium ion battery.
“As the particle size decreases, so does the time it takes for the lithium-ion to transfer into the graphite structure during charging and out during discharging, thereby improving charging rates,” he said. An SEM photomicrograph of the Superfine Grade of the Lac Knife spherical graphite is shown below.
A photo accompanying this announcement is available at http://www.globenewswire.com/NewsRoom/AttachmentNg/494ef0f5-0b43-44e9-8593-6728e2c7b8b9
The particle size distribution curves for the new Superfine Grade of spherical graphite are compared with the Standard and Fine Grade curves in Fig. 2 and show that Focus now offers a wide range of particle sizes to meet the demands of the battery industry.
An infographic accompanying this announcement is available at http://www.globenewswire.com/NewsRoom/AttachmentNg/42ef4124-58ad-4c16-9245-89b15aa59222
Dr. Doninger noted that the high Reversible Capacity of 360 mAh/g, low Irreversible Capacity Loss of 1.19% and low surface area of 0.89 m2/g for the new Superfine Grade of spherical graphite compare very favorably with the Lac Knife’s Standard and Fine grades introduced in 2014 as shown in Table 1.
A table accompanying this announcement is available at http://www.globenewswire.com/NewsRoom/AttachmentNg/8a5bd647-8eb4-4700-9f9e-5893dce130f9
The Company knows of no other junior graphite developer today with a deposit capable of competitively converting their fine flake component to battery grade production.
Focus Graphite President and Chief Executive Officer Gary Economo said the Company’s ongoing R&D and materials testing aims to position Focus as a commercially competitive and important source of new graphite products for next generation energy storage and production.
Focus is currently engaged in battery testing with more than 20 potential end-users and seven universities and government laboratories.
“The key to growth of our value-added products stems from our technology vision of investing in those in-house process developments that meet future demands of the battery manufacturing industry,” Mr. Economo said.
“In this regard, and as evidenced by the periodic publications of data in support of our progress, Focus remains committed to achieving its long-held goal of unlocking shareholder value from that technology vision,” Mr. Economo said.
As a technology graphite developer, Focus is deeply engaged in R&D and development of graphite concentrate and value added products for a low carbon economy.
Focus has established a recent history of technological successes by designing processes leading to superior performing coated spherical graphite for use in battery anodes and high performing expanded graphite for use in Li-Ion battery cathodes.
The Company’s proprietary, low temperature process, developed by a Focus Graphite technical team headed by Dr. Doninger, is believed to be more efficient than very high temperature thermal purification and is suitable for the removal of specific types of impurities found in the Lac Knife graphite deposit.
Focus' low temperature process versus conventional very high temperature purification processes obviates the use of large amounts of energy - one of the largest single cost components of graphite purification.
Focus Graphite has acquired an intimate understanding of both the future needs of the battery manufacturing sector and trends in that sector as a long-standing Board Member of Chicago-based NAATBatt International (the National Alliance for Advanced Transportation Batteries).
Holding the ability to purify Lac Knife's fine flakes expands the company's potential to sell substantially more of the graphite extracted from Lac Knife into high-value, high-tech applications instead of approximately 30 percent being sold for lower value industrial applications.
The path from graphite product development to the battery manufacturers' testing labs is a lengthy, multi-step process.
Staged R&D testing is a prerequisite to the sale, or offtake, of any manufactured graphite for use in lithium-ion, alkaline and lead-acid batteries in the automobile, consumer, medical equipment, tools, hand-held industrial devices and aviation manufacturing industries or with military equipment suppliers.
Qualified Person
Dr. Joseph Doninger, Focus Graphite's Director of Technology and Manufacturing is the Qualified Person under National Instrument 43-101 - Standards of Disclosure for Mineral Projects - and has reviewed and approved the technical content of this news release. Dr. Doninger is an internationally recognized graphite processing expert and himself, the inventor of a number of patents and an author of over 27 technical papers and presentations related to graphite processing and the use of graphite in energy storage systems. Dr. Doninger is a co-editor on the NATO Science Series book titled "New Carbon Based Materials for Electrochemical Energy Storage Systems." Dr. Doninger is also an Honorary Professor at the Department of Chemistry from the Kiev National University of Technologies and Design.
About Focus Graphite
Focus Graphite Inc. is an advanced exploration and mining company with an objective of producing graphite concentrate at its wholly-owned Lac Knife flake graphite deposit located 27 km south of Fermont, Québec. In a second stage, to meet Quebec stakeholder interests of transformation within the province and to add shareholder value, Focus is evaluating the feasibility of producing value added graphite products including battery-grade spherical graphite. Focus Graphite is a technology-oriented graphite mining development company with a vision for building long-term, sustainable shareholder value. Focus also holds a significant equity position in graphene applications developer Grafoid Inc.
For more information about Focus Graphite, please visit www.focusgraphite.com.
Forward Looking Statement
This News Release contains "forward-looking information" within the meaning of Canadian securities legislation. All information contained herein that is not clearly historical in nature may constitute forward-looking information. Generally, such forward-looking information can be identified by the use of forward-looking terminology such as "plans", "expects" or "does not expect", "is expected", "budget", "scheduled", "estimates", "forecasts", "intends", "anticipates" or "does not anticipate", or "believes", or variations of such words and phrases or state that certain actions, events or results "may", "could", "would", "might" or "will be taken", "occur" or "be achieved". Forward-looking information is subject to known and unknown risks, uncertainties and other factors that may cause the actual results, level of activity, performance or achievements of the Company to be materially different from those expressed or implied by such forward-looking information, including but not limited to: (i) volatile stock price; (ii) the general global markets and economic conditions; (iii) the possibility of write-downs and impairments; (iv) the risk associated with exploration, development and operations of mineral deposits; (v) the risk associated with establishing title to mineral properties and assets; (vi) the risks associated with entering into joint ventures; (vii) fluctuations in commodity prices; (viii) the risks associated with uninsurable risks arising during the course of exploration, development and production; (ix) competition faced by the Company in securing experienced personnel and financing; (x) access to adequate infrastructure to support mining, processing, development and exploration activities; (xi) the risks associated with changes in the mining regulatory regime governing the Company; (xii) the risks associated with the various environmental regulations the Company is subject to; (xiii) risks related to regulatory and permitting delays; (xiv) risks related to potential conflicts of interest; (xv) the reliance on key personnel; (xvi) liquidity risks; and (xvii) the risk of potential dilution through the issue of common shares.
Forward-looking information is based on assumptions management believes to be reasonable at the time such statements are made, including but not limited to, continued exploration activities, no material adverse change in metal prices, exploration and development plans proceeding in accordance with plans and such plans achieving their stated expected outcomes, receipt of required regulatory approvals, and such other assumptions and factors as set out herein. Although the Company has attempted to identify important factors that could cause actual results to differ materially from those contained in the forward-looking information, there may be other factors that cause results not to be as anticipated, estimated or intended. There can be no assurance that such forward-looking information will prove to be accurate, as actual results and future events could differ materially from those anticipated in such forward-looking information. Such forward-looking information has been provided for the purpose of assisting investors in understanding the Company's business, operations and exploration plans and may not be appropriate for other purposes. Accordingly, readers should not place undue reliance on forward-looking information. Forward-looking information is made as of the date of this News Release, and the Company does not undertake to update such forward-looking information except in accordance with applicable securities laws.
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the accuracy of this release.
CONTACT:
Focus Graphite Inc.
Mr. Gary Economo
Chief Executive Officer
+1 613-241-4040
geconomo@focusgraphite.com
www.focusgraphite.com??
Focus Graphite Introduces Its New “Superfine Grade” of Coated Spherical Graphite for Lithium Batteries to the International Battery Industry
Share1Print
October 10, 2017 13:56 ET | Source: Focus Graphite Inc.
photo-release
SEM of Purified Lac Knife Flake Graphite
SEM of Purified Lac Knife Flake Graphite
SEM of Purified Lac Knife Flake Graphite
Focus Graphite Inc.
Figure 1. INITIAL GALVANOSTATIC CHARGE-DISCHARGE CURVES FOR SUPERFINE GRADE OF COATED SPG D50 = 11.9µm
Figure 1. INITIAL GALVANOSTATIC CHARGE-DISCHARGE CURVES FOR SUPERFINE GRADE OF COATED SPG D50 = 11.9µm
Figure 1. INITIAL GALVANOSTATIC CHARGE-DISCHARGE CURVES FOR SUPERFINE GRADE OF COATED SPG D50 = 11.9µm
Focus Graphite Inc.
SEM of Superfine Grade of Lac Knife Spherical Graphite
SEM of Superfine Grade of Lac Knife Spherical Graphite
SEM of Superfine Grade of Lac Knife Spherical Graphite
Focus Graphite Inc.
Figure 2. PARTICLE SIZE DISTRIBUTIONS OF SUPERFINE, FINE AND STANDARD GRADES OF LAC KNIFE SPG
Figure 2. PARTICLE SIZE DISTRIBUTIONS OF SUPERFINE, FINE AND STANDARD GRADES OF LAC KNIFE SPG
Figure 2. PARTICLE SIZE DISTRIBUTIONS OF SUPERFINE, FINE AND STANDARD GRADES OF LAC KNIFE SPG
Focus Graphite Inc.
Table 1. COMPARISON OF THE ELECTROCHEMICAL PERFORMANCE OF THREE GRADES OF LAC KNIFE SPHERICAL GRAPHITE (SPG)
Table 1. COMPARISON OF THE ELECTROCHEMICAL PERFORMANCE OF THREE GRADES OF LAC KNIFE SPHERICAL GRAPHITE (SPG)
Table 1. COMPARISON OF THE ELECTROCHEMICAL PERFORMANCE OF THREE GRADES OF LAC KNIFE SPHERICAL GRAPHITE (SPG)
Focus Graphite Inc.
OTTAWA, Oct. 10, 2017 (GLOBE NEWSWIRE) -- Focus Graphite Inc. (TSX-V:FMS) (OTCQX:FCSMF) (FSE:FKC) is pleased to announce the introduction of a Superfine Grade of coated spherical graphite product sourced from its Lac Knife Graphite Project at Fermont, Quebec.
The Company’s manufacturing accomplishment was achieved under the direction of Dr. Joseph Doninger, Focus’ Director of Manufacturing and Technology, and follows the Company’s original May 27, 2014 announcement of the development of its premium standard (medium) and fine battery grades, and; its subsequent August 8, 2016 announcement of the successful purification of Lac Knife’s fine grade material to 99.99% purity which is shown in the following Scanning Electron Microscope (SEM) photomicrograph of a flake of purified Lac Knife graphite.
A photo accompanying this announcement is available at http://www.globenewswire.com/NewsRoom/AttachmentNg/19dd47dc-41c8-4ce1-b62a-2db97d76a1ae
Focus Graphite’s new Superfine Grade graphite product development was first presented to the 34th International Battery Symposium (IBS) in Fort Lauderdale, Florida, by Dr. Doninger on March 21, 2017.
Highlights include:
Market introduction of Focus’ first Superfine coated spherical graphite
Enlarges Company’s potential customer base
Expands Focus Graphite’s value-added product range
Focus Graphite’s development and introduction of a Superfine Grade to the battery market represents a milestone in the Company’s ongoing efforts to continuously improve its products to meet industry demands and are intended for use in various lithium-ion battery applications. The first cycle Galvanostatic curves in Figure 1 show that the new Superfine Grade of spherical graphite has a very high reversible capacity of 360 mAh/g and low first cycle loss of only 1.19%.
An infographic accompanying this announcement is available at http://www.globenewswire.com/NewsRoom/AttachmentNg/16fab8d7-641a-4f69-8050-dd479b12f773
Dr. Doninger said the main benefit of the Superfine Grade is based upon the physical reality of the graphite’s performance within the anode of a lithium ion battery.
“As the particle size decreases, so does the time it takes for the lithium-ion to transfer into the graphite structure during charging and out during discharging, thereby improving charging rates,” he said. An SEM photomicrograph of the Superfine Grade of the Lac Knife spherical graphite is shown below.
A photo accompanying this announcement is available at http://www.globenewswire.com/NewsRoom/AttachmentNg/494ef0f5-0b43-44e9-8593-6728e2c7b8b9
The particle size distribution curves for the new Superfine Grade of spherical graphite are compared with the Standard and Fine Grade curves in Fig. 2 and show that Focus now offers a wide range of particle sizes to meet the demands of the battery industry.
An infographic accompanying this announcement is available at http://www.globenewswire.com/NewsRoom/AttachmentNg/42ef4124-58ad-4c16-9245-89b15aa59222
Dr. Doninger noted that the high Reversible Capacity of 360 mAh/g, low Irreversible Capacity Loss of 1.19% and low surface area of 0.89 m2/g for the new Superfine Grade of spherical graphite compare very favorably with the Lac Knife’s Standard and Fine grades introduced in 2014 as shown in Table 1.
A table accompanying this announcement is available at http://www.globenewswire.com/NewsRoom/AttachmentNg/8a5bd647-8eb4-4700-9f9e-5893dce130f9
The Company knows of no other junior graphite developer today with a deposit capable of competitively converting their fine flake component to battery grade production.
Focus Graphite President and Chief Executive Officer Gary Economo said the Company’s ongoing R&D and materials testing aims to position Focus as a commercially competitive and important source of new graphite products for next generation energy storage and production.
Focus is currently engaged in battery testing with more than 20 potential end-users and seven universities and government laboratories.
“The key to growth of our value-added products stems from our technology vision of investing in those in-house process developments that meet future demands of the battery manufacturing industry,” Mr. Economo said.
“In this regard, and as evidenced by the periodic publications of data in support of our progress, Focus remains committed to achieving its long-held goal of unlocking shareholder value from that technology vision,” Mr. Economo said.
As a technology graphite developer, Focus is deeply engaged in R&D and development of graphite concentrate and value added products for a low carbon economy.
Focus has established a recent history of technological successes by designing processes leading to superior performing coated spherical graphite for use in battery anodes and high performing expanded graphite for use in Li-Ion battery cathodes.
The Company’s proprietary, low temperature process, developed by a Focus Graphite technical team headed by Dr. Doninger, is believed to be more efficient than very high temperature thermal purification and is suitable for the removal of specific types of impurities found in the Lac Knife graphite deposit.
Focus' low temperature process versus conventional very high temperature purification processes obviates the use of large amounts of energy - one of the largest single cost components of graphite purification.
Focus Graphite has acquired an intimate understanding of both the future needs of the battery manufacturing sector and trends in that sector as a long-standing Board Member of Chicago-based NAATBatt International (the National Alliance for Advanced Transportation Batteries).
Holding the ability to purify Lac Knife's fine flakes expands the company's potential to sell substantially more of the graphite extracted from Lac Knife into high-value, high-tech applications instead of approximately 30 percent being sold for lower value industrial applications.
The path from graphite product development to the battery manufacturers' testing labs is a lengthy, multi-step process.
Staged R&D testing is a prerequisite to the sale, or offtake, of any manufactured graphite for use in lithium-ion, alkaline and lead-acid batteries in the automobile, consumer, medical equipment, tools, hand-held industrial devices and aviation manufacturing industries or with military equipment suppliers.
Qualified Person
Dr. Joseph Doninger, Focus Graphite's Director of Technology and Manufacturing is the Qualified Person under National Instrument 43-101 - Standards of Disclosure for Mineral Projects - and has reviewed and approved the technical content of this news release. Dr. Doninger is an internationally recognized graphite processing expert and himself, the inventor of a number of patents and an author of over 27 technical papers and presentations related to graphite processing and the use of graphite in energy storage systems. Dr. Doninger is a co-editor on the NATO Science Series book titled "New Carbon Based Materials for Electrochemical Energy Storage Systems." Dr. Doninger is also an Honorary Professor at the Department of Chemistry from the Kiev National University of Technologies and Design.
About Focus Graphite
Focus Graphite Inc. is an advanced exploration and mining company with an objective of producing graphite concentrate at its wholly-owned Lac Knife flake graphite deposit located 27 km south of Fermont, Québec. In a second stage, to meet Quebec stakeholder interests of transformation within the province and to add shareholder value, Focus is evaluating the feasibility of producing value added graphite products including battery-grade spherical graphite. Focus Graphite is a technology-oriented graphite mining development company with a vision for building long-term, sustainable shareholder value. Focus also holds a significant equity position in graphene applications developer Grafoid Inc.
For more information about Focus Graphite, please visit www.focusgraphite.com.
Forward Looking Statement
This News Release contains "forward-looking information" within the meaning of Canadian securities legislation. All information contained herein that is not clearly historical in nature may constitute forward-looking information. Generally, such forward-looking information can be identified by the use of forward-looking terminology such as "plans", "expects" or "does not expect", "is expected", "budget", "scheduled", "estimates", "forecasts", "intends", "anticipates" or "does not anticipate", or "believes", or variations of such words and phrases or state that certain actions, events or results "may", "could", "would", "might" or "will be taken", "occur" or "be achieved". Forward-looking information is subject to known and unknown risks, uncertainties and other factors that may cause the actual results, level of activity, performance or achievements of the Company to be materially different from those expressed or implied by such forward-looking information, including but not limited to: (i) volatile stock price; (ii) the general global markets and economic conditions; (iii) the possibility of write-downs and impairments; (iv) the risk associated with exploration, development and operations of mineral deposits; (v) the risk associated with establishing title to mineral properties and assets; (vi) the risks associated with entering into joint ventures; (vii) fluctuations in commodity prices; (viii) the risks associated with uninsurable risks arising during the course of exploration, development and production; (ix) competition faced by the Company in securing experienced personnel and financing; (x) access to adequate infrastructure to support mining, processing, development and exploration activities; (xi) the risks associated with changes in the mining regulatory regime governing the Company; (xii) the risks associated with the various environmental regulations the Company is subject to; (xiii) risks related to regulatory and permitting delays; (xiv) risks related to potential conflicts of interest; (xv) the reliance on key personnel; (xvi) liquidity risks; and (xvii) the risk of potential dilution through the issue of common shares.
Forward-looking information is based on assumptions management believes to be reasonable at the time such statements are made, including but not limited to, continued exploration activities, no material adverse change in metal prices, exploration and development plans proceeding in accordance with plans and such plans achieving their stated expected outcomes, receipt of required regulatory approvals, and such other assumptions and factors as set out herein. Although the Company has attempted to identify important factors that could cause actual results to differ materially from those contained in the forward-looking information, there may be other factors that cause results not to be as anticipated, estimated or intended. There can be no assurance that such forward-looking information will prove to be accurate, as actual results and future events could differ materially from those anticipated in such forward-looking information. Such forward-looking information has been provided for the purpose of assisting investors in understanding the Company's business, operations and exploration plans and may not be appropriate for other purposes. Accordingly, readers should not place undue reliance on forward-looking information. Forward-looking information is made as of the date of this News Release, and the Company does not undertake to update such forward-looking information except in accordance with applicable securities laws.
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the accuracy of this release.
CONTACT:
Focus Graphite Inc.
Mr. Gary Economo
Chief Executive Officer
+1 613-241-4040
geconomo@focusgraphite.com
www.focusgraphite.com??
Shush we’re in stealth mode.
You mentioned the garage, that was top secret and you even had the audacity to talk about the rocket; well that just pissed me off now!
Hey but freshfield coming in!
And maybe they will announce multi million online sales and while there at it announce there partners
That’s a man purse I have one too
Kidding aside it's almost ready steve is confecting the prototype in his garage.
Hey stop it we're in stealth mode.
Know what you own. TM
Not everyone has level 2 and real time quotes
Wait a minute they are working with the Jewish general hospital aren't they?
Hope they won't get upset if I take credit for some of predictions!
After all I have been a bag holder for 6 years+
GO QTMM
Cmon Stevie show us what's going down!
Looks promising, you think Apple is working with our qdots?
There's a good chance they are!
After all we do have the worlds best qdots!
Go qtmm!
Qdx inside possibly one day in an apple device near you!
The link
Qd
I never seen that was it ever posted on here?
Everything is there financing is a big issue because this is not gold they need solid offtakes to get financing
Bankers don't have statistics for graphite mines nor they don't understand the business.
Some still don't know what graphene is
Hi
At the agm in may they said they are working on financing and are closer than ever. Its one thing to say it and one thing to execute it. this is 6+ years in the making. If they dont finance by next fall there cooked.
I don't get you or most on here either. So we agree on something.
If something comes out of this, we'll good for you and me. If not and we've been fooled then good for the ones that fooled us.
Now as you know nothing is a certainty only death is.
The problem here from the beginning was the over enthusiastic
Talk and big theory's that never amalgamated to nothing.
The condescending rebuttals of anyone that questioned the high horse of Stevie. He hasn't proven anything, its all on paper.
So if you guys take this really seriously good for you. I won't until something tangible comes out of this and if I do make money then I wasn't a fool for sticking around so long, because after all Stevie's dots did seem interesting from the start.
I did trade this in teens and bought back in even larger positions than six years ago if that appeases you.
Good luck to you.
Well after over 6 years here I resorted
To humour. If this works out I'll still end up laughing.
kidding aside I still have a nice position. If this hits .075 and below I'll buy more.
Dude we have all kind of deals going on. Stevie's Chinese pilgrimage will soon bear fruit. Solterra solar panels fresh off the press from the garage and online multi million sales as said.
Oh freshfield money coming in as we speak!
If none of that happens in 2017.
Well 2018 will be even better! Trust them we have our marketing director reassuring us with evangelical praise.
Also don't forget qdx in a smart city near you!
The gates have been breached finally.
25 might be new bottom!
We have solterra solar panels in steves garage!
Don't forget most big Silicon Valley tech companies started in garages.
Qmc is at the eave of releasing their disruptive qd technology.
Freshfield In the works and multi million qd website sales.
Hang on everyone Stevie is preparing our ride.
2018 will be the year! Forget freshfield if that doesn't come through there's bigger and better fish out there!
Come on Stevie show us long investors the power of our superior dots!
Soon enough qdx in a smart city near you!
I wouldn't worry too much about it
Stevie has many other avenues and tricks up his sleeves.
Qdx in a smart city near you!
Freshfield money coming in soon!
I can almost feel it. Tic toc.
If it doesn't work out with tv's there's so many other opportunities for Stevie to capitalize on.
Qdx soon in a smart city near you!
You forgot sailboats and palm trees.
Let's go Stevie show the valiant longs what you been up to all these years.
Unleas the power of qdx
I'm already in from 4+ years ago
Question is has someone ever called the Jewish to see if the drug is really being tested?
How about that Company that got the contract to make the pills?
If this is true what you are saying
Start a lawsuit if you are so concerned
I absolutely agree it might even come from kaust ,solterra possibly even Apple?
Qdx inside a smart city near you.tm
They are working on solterra solar panels in Stevie's garage.
Soon enough in smart city near you!
Hey don't worry with Stevie at helm with son, they are working in our best interest.
QdX in a smart city near you soon enough!
Hihihoho
You guys take this way too serious
Gonna give yourselves an ulcer.
Better laugh while waiting than to
Act like a pompous know it all.
That's right forget tv's stevie
Let's switch it up to smart cities.
It's an obvious route to take.
How so?
Did Stevie and son tell you this?
this is to list on tsx. its a positive sign.
Hey know what you own
And it takes the time it takes
Ridiculous
What happened did someone else log into your account not as upbeat as usual?
Drumroll
Badum tshhhh