Ditto

I use Fidelity for my trades in GEO:FR
and had the same great results that Gary reported.
Additionally, I have been using Fidelity's
Active Trader Pro 10.0 and have been able to
customize it to my liking.

Bulletin from extraordinary general meeting of Arcam AB (publ) December 6, 2013
Fri , December 6, 2013 11:18 ET

The Extraordinary General Meeting of Arcam AB 6 December 2013 were as follows:

Decision to split ( "split " ) and amendment of articles of association

The AGM approved the Board's proposal to resolve the split of shares and decide if connected amendment of the Articles.

a) Split of shares

A split of shares 4:1 , meaning that 1 (one) share is divided into 4 (four ) shares.

Further information on the procedure for the split will be published in conjunction with the Board of Directors decides on the record date.

b) Amendment of the Articles of Association

In view of the above split of shares , the meeting decided that § 5 ( Number of shares) in the current articles of association be amended to the following wording

The number of shares shall be not less than 12,000,000 and not more than 48 000 , 000.

Resolution authorizing the Board

The meeting resolved to authorize the Board , until the next Annual General Meeting, on one or more occasions, to issue new shares, issue of convertible bonds or warrants. Issue shall be transacted with or without deviation from the shareholders' preferential rights and with or without non-cash , settlement or other conditions . The overall increase of the share capital pursuant to the authorization shall not exceed 1 600 000, representing an increase of share capital from the current 16 741 633,50 to a maximum of 18 341 633.50 , ie an increase by a maximum of just under 10%. The shares will be issued at the current market price .

This authorization is to give the Board flexibility in efforts to finance and facilitate accelerated expansion and development of the Company, its market and products.

Mölndal December 6, 2013
Arcam AB (publ)
Board of Directors

Arcam manufactures equipment to directly from digital three-dimensional models produce components from metal powder , known as Additive Manufacturing. Arcam technology, EBM ® , allows for cost-effective production of products with advanced functionality. Arcam's market is global with customers primarily in orthopedic implants and aerospace industries . The company was founded in 1997 and is listed on NASDAQ OMX. The head office and production facilities are located in Mölndal. Service offices located in USA , UK, Italy and China.

Here is the Google Translation:

Prodways new generation of 3D printers challenge market leader

2013-11-30 13:15 | Posted by : admin | Views : 196 | Comments: 0
Abstract: In May 2013 the French engineering firm Groupe Gorge (GOE) to 4.8 million euros in the price of the acquisition of the 3D printer manufacturer Phidias Technologies company 88% of the shares. Recently , GOE CEO Raphael Gorge said , GOE is now ready to enter the field of 3D printing , and try the new industrial revolution ...

May 2013 French engineering company Groupe Gorge (GOE) to 4.8 million euros in the price of the acquisition of the 3D printer manufacturer Phidias Technologies company 88% of the shares. Recently , GOE CEO Raphael Gorge said , GOE is now ready to enter the field of 3D printing , and try to play an important role in the new industrial revolution .

Phidias Technologies company now renamed Prodways, 2012 sales of 100 million euros , income margin was 15%.

Prodways claims that its combination of UVA LED and DLP mobile MOVINGLight patented technology capable of producing perfect parts. Release Prodways first movable head DLP 3D printer manufacturer image DLP projection head with movement of the irradiation on the photosensitive resin layer by layer and cured . Mobile DLP technology can be used in the construction of a large area of ??the smaller single image projection , so that the printed result will be more accurate, higher precision. Meanwhile Prodways use UVA LED to accelerate the curing reaction , which can improve print speed.

The company said in print large parts respect, it has received a " resolution and accuracy of the world record ." It is expected that the demand for this type of printer is about $ 400 million annually.

Features:

Precision high-speed printing: hundreds of small parts several hours to complete, accuracy of less than 35 microns
Unparalleled Resolution : each pixel over 500 million
Direction in three dimensions (vertical and horizontal ) can achieve high precision, can be used in many fields , such as dental
Large parts of the complex print , still maintain high accuracy
Can be applied to composite and hybrid materials 3D printing
Excellent surface quality with minimal post-processing

MOVINGLight technology was developed by 3D Systems , former chief scientist Andre-Luc Allanic invention , Allanic Phidias Technologies and founded the company in 2007 . Phidias Technologies has so far sold 17 units 3D printers , these machines are mainly in Europe , where Germany is the company's major markets.

One technical advantage is Prodways manufacturing quality composite and hybrid materials. The use of these materials out of mechanical properties, physical properties , appearance and taste components.

"Production efficiency of our machines are our biggest competitors three to four times ." Raphael Gorge told Bloomberg . The company is targeting the dental restoration industry customers, such as dental products manufacturer Align Technology. Gorge said dental restoration industry are the largest 3D printing technology applications worldwide . Their machines can print up to 5 hours 100 tooth model , really impressive.

In 2014 , the company plans to sell more than 10 printers , each priced between 300,000 euros to 400,000 euros , in the high-end market . Prodways while also developing its own resin products with a view to increase its annual revenue .

At this year's EuroMold exhibition , Prodways 4 will showcase its new 3D printer , including:



M350 Producer:

You can print more than 1 meter in diameter , the height of over 55 cm of large components , or both print many small parts . M350 performance parts with extremely precise control of the height .

K20 Producer:

Designed for printing composite parts design . K20 with high viscosity materials ( cream texture ) unique processing capabilities, you can 3D print composite parts , especially ceramic and metallic materials . The results of a very high density printing .



D35 Producer:

In all three dimensions has a very high accuracy , can be used for biomedical and dental applications .





Unless otherwise specified in the articles, website articles are original or compiled, reproduced, please indicate " from the Heavenly Social maker8.com" and link back to this page , thank you !



3D printing technology to realize their dreams

https://europeanequities.nyx.com/en/products/equities/FR0000062671-XPAR/quotes

https://europeanequities.nyx.com/en/products/equities/FR0000062671-XPAR/quotes

Took a starter pos today...thx

news
http://ih.advfn.com/p.php?pid=nmona&article=60051047&symbol=NVIV

NOTICE OF EXTRAORDINARY GENERAL MEETING OF ARCAM AB
Fri , November 8, 2013 02:30 ET

Shareholders of Arcam AB (publ) , corporate identity number 556539-5356 , are hereby invited to an Extraordinary General Meeting on Friday, December 6, 2013 at 16:00 , at the company's premises , Krokslätts Factories 27A , Mölndal. Registration for the meeting is between the hours of 15:30 to 16:00 .

Shareholders wishing to participate in the Meeting

be registered in their own name ( not nominee-registered ) in the Euroclear Sweden AB share register by 29 November 2013

notify the company not later than 4 December 2013 at 12:00 , at the address Arcam AB , Krokslätts Factories 27A , 431 37 Mölndal , or by fax at 031-710 32 01 , or via e-mail carolina@arcam.com .

The number of attending assistants (maximum two ) must be notified at the same time .

In the notification, the shareholder shall state personal or corporate , address and telephone number. Shareholders represented by proxy shall produce a written and dated power of attorney , as at the date of the AGM can not be older than five years. Proxy and representative of a legal person shall submit authorization documents prior to the meeting (signed and dated power of attorney and / or current registration certificate ) .

Shareholders with nominee- registered shares must temporarily re-register their shares in their own name to be entitled to attend the meeting . Such registration must be completed at Euroclear Sweden AB by 29 November 2013 and the nominee must be notified in advance of this date.

Draft Agenda

At an Extraordinary General Meeting , the following matters:

1. opening of the meeting

2nd Election of Chairman of the Meeting

3rd Preparation and approval of voting list

4. Selection of at least one minutes

5th Ask whether the Meeting has been duly convened

6. Adoption of the agenda

7. Decisions on stock split and amendment of the Articles of Association

8. Decision to authorize the Board to issue new shares , convertible debentures or debentures with warrants .

9. closing of the meeting

Motions

Decision on reduction of share ( "split " ) of shares and amendment of articles of association (item 7)

The Board of Directors proposes to the AGM in order to achieve the appropriate number of shares , to decide on the split of shares and adopt coherent change in the Articles of Association.

a) Split of shares

The Board proposes that the Meeting in order to achieve the appropriate number of shares , decide on a split of shares 4:1 , meaning that 1 (one) share is divided into 4 (four ) shares.

b) Amendment of the Articles of Association

In view of the above proposals for split of shares , the Board proposes that § 5 Number of shares, in the present Articles of Association be amended to the following wording

The number of shares shall be not less than 12,000,000 ( 3,000,000 ) and a maximum of 48,000,000 ( 12,000,000 ) .

Decision to authorize the Board to issue new shares , convertible debentures or debentures with warrants (item 8)

The Board proposes that the Meeting authorize the Board, until the next Annual General Meeting, on one or more occasions, to issue new shares, issue of convertible bonds or warrants. The issue shall be made ??with or without deviation from the shareholders ' preferential rights and with or without non-cash , offset, or other terms. The overall increase of the share capital pursuant to the authorization shall not exceed 1 600 000, representing an increase of share capital from the current 16 741 633,50 to a maximum of 18 341 633.50 , ie an increase by a maximum of just under 10%. The shares will be issued at the current market price .

This authorization is to give the Board flexibility in efforts to finance and facilitate accelerated expansion and development of the Company, its market and products.

other Information

Resolution to adopt the points 7 and 8 are valid only if supported by shareholders representing at least two thirds of the votes cast at the meeting at which the shares represented .

Total number of shares and votes in the Company is 4,185,408 at the time of issuing this notice. All shares are of the same kind.

Complete proposal , including background to item 7 will be available to shareholders at the Arcam AB's office , Krokslätts Factories 27A , 431 37 Mölndal, Sweden , and the company's website www.arcam.com , from by 8 November 2013 and will be mailed to the shareholders who so request and state their address.

Shareholders under Chapter 7, § 32 Companies Act ( 2005:551), the right to the Meeting request information from the Board and CEO of circumstances that may affect items on the agenda and circumstances which may affect the company 's financial situation.

Mölndal in November 2013

Arcam AB (publ)

Board of Directors

Arcam manufactures equipment directly from digital three-dimensional models produce components from metal powder , known as Additive Manufacturing. Arcam technology, EBM ® , allows for cost-effective production of products with advanced functionality. Arcam's market is global with customers primarily in orthopedic implants and aerospace industries . The company was founded in 1997 and is listed on NASDAQ OMX. Head office and production facilities are located in Mölndal. Service Center in the USA, UK, Italy and China.

________________________________________________________________________________________

Arcam AB • Krokslätts Factories 27A • SE- 431 37 Mölndal , Sweden • 46-31-710 32 00 • www.arcam.com


For further information please contact:
Magnus René , CEO of Arcam AB
Phone: 031 710 32 00 or . mobile: 0702 79 89 99 or E-mail: magnus.rene @ arcam.com
About Us

Arcam manufactures equipment directly from digital three-dimensional models produce components from metal powder , known as Additive Manufacturing. Arcam technology, EBM ® , allows for cost-effective production of products with advanced functionality. Arcam's market is global with customers primarily in orthopedic implants and aerospace industries . The company was founded in 1997 and is listed on NASDAQ OMX. Head office and production facilities are located in Mölndal. Service Center in the USA, Italy and China.
plug

Arcam
+46 31-710 32 00
info@arcam.com

Documents and Links

release

© Cision

What Does 3D Printing Have To Do With Food Scarcity And Climate Change?

http://thinkprogress.org/climate/2013/10/09/2757331/3d-printing-food/

Outstanding shares according to ihub, is 96.79M.

I ran across this interview in their news feed.

Join the Fool for a chat with Dassault Systèmes Senior VP Al Bunshaft about how 3D design software contributes to innovation in fields from consumer goods to health care.

http://www.fool.com/investing/general/2013/09/19/whats-next-for-dassault-systemes-and-how-it-profit.aspx

Problem has been corrected....Thanks for the info!

The app does not work for me. I can't get past the log in screen since upgrading yesterday AM.

is this the segment?
http://www.nbcnews.com/id/3036789/#52872984

Try bidding with no rounding....i.e. .0397 for example.
JMHO

I'm sorry UK, not sure what you mean.....did you mean this as a reply to the original poster?
I only searched for the link out of curiosity and shared it.
It was based on a weeks timeframe, so not sure what original
poster's point was/is.....

http://www.forbes.com/sites/matthewherper/2013/08/04/the-best-and-worst-performing-biotech-stocks-july-26-to-august-2/?partner=yahootix

Possibly just terminology?
If they gave an estimated date,
they would be held to the fire.
Easier to say postponed indefinitely,
especially, if you do not have a definitive
time frame.
All JMO

excellent! total agreement!

SEAT THE BOARD!

Thank you.....here is the link
http://www.cbsnews.com/video/watch/?id=50145767n

http://www.plastic2oil.com/site/news-releases-master/2013/05/15/jbi-inc-offers-board-of-directors-update

News Releases
JBI, Inc. Offers Board of Directors Update

Posted May 15th, 2013 in 2013 News Releases

Niagara Falls, New York, May 15, 2013 - JBI, Inc. (the “Company” or “JBI”) (OTCQB: JBII), a clean energy company that recycles waste plastic into liquid fuels, announced an update today with regards to its Board of Directors search.

JBI President and CEO Tony Bogolin stated, “Constituting a Board of qualified independent Directors remains a paramount priority for the Company. The process of identifying candidates with the experience and professional ethics that we desire and know that our shareholders expect is not a simple one. We have identified and are in discussions with several highly qualified candidates and are hopeful that completion of the recruiting process and due diligence will result in a positive outcome.”

Matthew Ingham, JBI’s Chief Financial Officer said, “The Company is in discussions with professional recruiting firms that have the capabilities to assist us in continuing to move forward with our search. We are continuing to deploy the resources necessary to complete this very important step in the Company’s history.”

In 2012, JBI, Inc. processed 1.7 million pounds of plastic and produced 317,000 gallons of in-spec end user fuels. For further information about the Company’s first fiscal quarter 2013, including its financial results, readers of this press release should review the Company’s disclosures in its Quarterly Report on Form 10-Q, which is publicly available on the website of the Securities and Exchange Commission at www.sec.gov.

thx....grabbed those for my first position here

Indeed!

one could say the same about trade # 57 at 15:58:29

http://www.facebook.com/Dropps

He said "we make heating oil for local factories"
Hmmmm.........

For the life of me, I don't understand the logic of Agilyx supporters denigrating JBII.

Startup Converts Plastic To Oil, And Finds A Niche

by Daniel Robison

Only 7 percent of plastic waste in the United States is recycled each year, according to the Environmental Protection Agency. A startup company in Niagara Falls says it can increase that amount and reduce the country's dependence on foreign oil at the same time.

It all starts with a machine known as the Plastic-Eating Monster. Thousands of pounds of shredded milk jugs, water bottles and grocery bags tumble into a large tank, where they're melted together and vaporized. This waste comes from landfills and dumps from all over the United States.

"Basically, they've been mining their piles for us and sending them here," says John Bordynuik, who heads his namesake company, JBI Inc. He invented a process that converts plastic into oil by rearranging its hydrocarbon chains.

Vying For Mainstream Acceptance

According to tests by the New York Department of Environmental Conservation, JBI's patented technology is efficient, with close to 90 percent of plastics coming out as fuel. Bordynuik says that makes the case for this kind of recycling to go mainstream.

"When there have been attempts in the past to make fuel from plastic, it's been low-quality, low-flashpoint, kind of sludgy," he says. "In this case here, we're making a very highly refined, consistent product that's within specifications of any standardized fuel."

JBI executive Bob Molodynia points to a spout at the other end of the plastic-eating machine, where a thin, brown liquid drips out.

"You could tap this right now and this is ready to go," he says. "That's a No. 6 fuel. That's what a lot of [companies] like U.S. Steel use, a lot of major companies — that's what they pay the big bucks for, right there."

Each barrel of oil costs about $10 to produce. JBI can sell it for around $100 through a national distributor. The young company is already producing a few thousand gallons of oil a day. It has signed lucrative deals to set up operations next to companies with large volumes of plastic waste.

But in its rush to grow, JBI has been accused by the Securities and Exchange Commission of overvaluing some of its assets in order to raise more funds.

The Stigma Of An 'Alternative Fuel' Label

And Bordynuik says it has been hard to find acceptance from potential oil buyers because JBI's product has been dubbed a "green fuel."

"We don't make a synthetic 'other' product that has problems," he says. "We make an in-spec fuel like everyone else. If anything, the word 'alternative' has a stigma attached to it, more so because of prior attempts."

If JBI has its way, plastics will become a significant source of domestic fuel that reduces the U.S. dependence on foreign oil. But just how "green" is JBI's recycling, when it produces a fossil fuel that pollutes just like any other?

"To enter themselves into this industry, I think that they've all bought into the idea of producing a fuel," says Carson Maxted of Resource Recycling, the plastic recycling industry's trade journal.

Maxted says he's not sure whether converting plastic to oil can be considered recycling, or even environmentally friendly. But he says JBI's methods can co-exist, and even complement, current recycling practices.

"They're getting value from something that would otherwise go to the landfill," he says, "because the plastics most of them are looking for, the plastics that are not easily recycled, they're of low quality or mixed-plastic types, or they're dirty — things that wouldn't be accepted into a recycler."

And because there's no lack of waste-plastic supply, and no lack of demand for oil, Maxted says the technology has the potential to transform both industries.

not until you mentioned it :)
http://www.otcmarkets.com/marketActivity/caveat-emptor-changes

Corporate Actions — Caveat Emptor Status Changes
Mar 6, 2012 JBII JBI, Inc. OTCQB Removed Common Stock

Here's the link 4 anyone interested:

http://www.cbsnews.com/video/watch/?id=7400862n&tag=contentBody;cbsCarousel

CBS Sunday Morning ran a segment
this AM re: Plastics in the Ocean
Titled "Rubbish"!

The "Voice" of the
Plastics industry states:
"We think there are more efficient
ways to incentivize the recycling,
recovery and handling of materials,
....We really believe that plastics
should not be land-filled, that is
absolutely the wrong thing to happen,
we should recycle what we can and
recover the rest of it".

PKG,

I believe this firm is one of the 12.

Story from Bloomberg:

Lawyers Cash In While Investor Clients Get Nothing in Merger Lawsuit Deals

None of the 10 cases that New York-based Faruqi & Faruqi helped to settle during the two years produced cash for clients, according to court records. Legal fees in those 10 cases totaled $6 million, split among plaintiffs’ firms.

http://www.bloomberg.com/news/2012-02-16/lawyers-cash-in-while-investor-clients-get-nothing-in-merger-lawsuit-deals.html

20+30+30=80 x 2=160 tons per day
my crystal ball says:
in our immediate future
jmo
cheers!

they look like the same size drums.
weren't 2 & 3 to be 30 ton?

Shell's "branding"......Shell Nitrogen Enriched Gasolines

"Please visit Shell On The Road on Facebook and learn how Shell Nitrogen Enriched Gasolines protect your engine against gunk and pick up some tips on how to save at the pump".

http://www.shell.us/home/content/usa/products_services/on_the_road/fuels/

Wonder how XTR will "brand" P2O?

http://www.plastic2oil.com/site/fuel-specs

Mr. Robbins was employed by Texon and Sunoco Logistics BOTH located in Texas.

John Colin Robbins, Senior Vice President

Mr. Robbins will build the petroleum team to enable our P2O products to be enhanced and distributed. His proficiency in petroleum products blending and his strong leadership will be invaluable assets to our company's commercial growth, and will contribute to JBI, Inc.'s standing in the environmental sustainability movement.

Robbins brings more than 30 years of knowledge and expertise in operations, marketing and manufacturing of renewable fuels to this key post. He specializes in the blending of ethanol, bio-diesel, butane and petroleum. He has been engaged in the petroleum and bio-fuels industry in a leadership capacity since 1989 with experience extending across North America — but he is most passionate about producing a profitable, environmentally responsible energy product.

Prior to joining JBI, Inc., he was most recently employed by Sunoco Partners Butane Blending LLC as Manager for Engineering, Construction and Operations where he successfully led three departments that designed, built and maintained multiple new butane injection systems in gasoline transfer terminals throughout the United States. He acted as both the General Manager and Director for Engineering, Construction, and Operations at Texon LP from 2007 until 2010. At Texon, Robbins led the engineering team to redesign the butane blending systems, which resulted in remarkable revenue growth.

He has been an active member of various petroleum boards and associations, including: Environmental Director of the Canadian Independent Petroleum Marketers Association's Board of Directors from 1995-2000, a member of the Ontario Petroleum Council from 2003-2004 and Ontario Gasoline Handing Code from 2002-2003, and served on the Canadian Federal Government Legislative Boards on Sulphur in Gasoline in 2001 and Benzene in Gasoline in 1999. He was a recipient of a National Research Council Grant awarded in Canada. Mr. Robbins holds an Honours Bachelor of Science in geology from Brock University.

Texon was bought by Sunoco Logistics
http://www.prnewswire.com/news-releases/sunoco-logistics-partners-lp-acquires-texons-butane-blending-business-97338579.html

Sunoco Logistics located in Texas
http://www.sunocologistics.com/

i count over 50% of the trades
done at 500 or multiples of...

JBI,Inc. Fuel is 0% H20
http://www.plastic2oil.com/site/clean-fuel