ABIGHAMMER''S TOOLS OF THE TRADE(s)

Sticky

ABIGIDIOT

okay. first, and very important sticky post.

Join the InvestorsHub Community

Register for free to join our community of investors and share your ideas. You will also get access to streaming quotes, interactive charts, trades, portfolio, live options flow and more tools.

Live Updating

Older

ABIGIDIOT

11/25/10 11:35 PM

Post #911

Re: #905: @Zardiw - I think you need a Big Hug..........et z

actually, i'm sure your the one that will need one when your fave stock craps its pants, and in turn, you in yours.

but, i'll be here for ya, and i wont even say i told u so.

MorningLightMountain Free

10/31/10 11:59 PM

Post #910

Re: #908: @ABIGIDIOT - i pity the fool who owns a stock

no kidding, and I thought I was bad!!!!!

PS: check this one out, it's been very, very good to me for over a decade......but it ain't no stinky penny stock, this is where the Big Boys play, so you may like it......just have the approximate bank roll, and as usual, buy at your own risk, yada, yada.....

http://investorshub.advfn.com/boards/board.aspx?board_id=3506

fixedops

10/30/10 11:55 PM

Post #909

Re: #908: @ABIGIDIOT - i pity the fool who owns a stock

Shut up and have a Snickers...LOL

ABIGIDIOT

10/30/10 11:46 PM

Post #908

Re: #867: @fixedops - sup csmf's........................

i pity the fool who owns a stock that has me pissed off.....

ABIGIDIOT

08/28/10 12:02 PM

Post #907

Re: #886: @Lawrence 147 - I will take that as a compliment coming

looks like you never heard that old adage about messin with the

bull, usually gets you the horn. oh well......

ABIGIDIOT

08/27/10 1:14 AM

Post #906

Re: #904: @Lawrence 147 - Well you have my apologies for offending your

no problem Lawrence. and i'll put you out of your misery as well here on the ABIGHAMMER board.

you are officially banned.

Zardiw

08/27/10 12:50 AM

Post #905

Re: #904: @Lawrence 147 - Well you have my apologies for offending your

I think you need a Big Hug..........et z

Lawrence 147 Free

08/27/10 12:49 AM

Post #904

Re: #898: @Zardiw - I think that hammer broke when it hit

Well you have my apologies for offending your sensibilities. I have removed your person mark and placed you on ignore; it may just be best that you return the favor in kind so as you flip through the boards you find no other post of mine that may offend you as well.
Had I known that was a sore subject with you then I would have never brought up the subject and you would not have felt the need to launch into such a vulgar tirade.
If it really bothers you that much let me know somehow, I can go back and look up your address and mail you the rats so you can give them a proper burial but you will have to find a way soon or the feral cats the crows or coyotes don’t eat them first.
Hammer leave this message up long enough for Z to make up his mind, then you can do whatever.

ABIGIDIOT

08/26/10 5:27 PM

Post #903

Re: #901: @Zardiw - Both heads apparently.....he he.......et z

Brave.

Zardiw

08/26/10 5:26 PM

Post #902

Re: #900: @ABIGIDIOT - junior leaguers are little match for ABIGHAMMER.

Otherewise referred to as a 24 Pound SLEDGE.....lol.......et z

Zardiw

08/26/10 5:26 PM

Post #901

Re: #899: @ABIGIDIOT - some people dont see the whole pic too

Both heads apparently.....he he.......et z

ABIGIDIOT

08/26/10 5:24 PM

Post #900

Re: #897: @Zardiw - Dude....you got some Big Brass ones mixing it

junior leaguers are little match for ABIGHAMMER.

ABIGIDIOT

08/26/10 5:23 PM

Post #899

Re: #898: @Zardiw - I think that hammer broke when it hit

some people dont see the whole pic too well Z. or, realize

how hard ABIGHAMMER head can be !!!!!

Zardiw

08/25/10 9:16 PM

Post #898

Re: #882: @Lawrence 147 - Will do, I guess when my post start

I think that hammer broke when it hit the BIG Hammer's head....lol......z

Zardiw

08/25/10 9:15 PM

Post #897

Re: #889: @Lawrence 147 - Business for myself been there done that too

Dude....you got some Big Brass ones mixing it up with the Sledge.....lol.......z

ABIGIDIOT

08/22/10 4:25 PM

Post #895

Re: #886: @Lawrence 147 - I will take that as a compliment coming

may have to turn this board premium, for obvious reasons.

Zardiw

08/21/10 8:50 PM

Post #893

Re: #892: @ABIGIDIOT - some of my crew.... we're headed out later

When I was growing up, we all admired the feds. Remember "FBI" with efrem Zimbalist Jr.? Now the federal government isbecoming a joke.

A DEA officer stops at a local ranch to talk with an old rancher. He tells the rancher, “I need to inspect your ranch for illegally grown drugs.” The rancher says, “Okay, but don’t go in that field over there.”

The officer verbally explodes saying, “Mister, I have the authority of the Federal Government with me.”

Reaching into his rear pants pocket, he removes his badge and proudly displays it to the rancher. “See this badge old man? This badge means I am allowed to go wherever I wish... on any land. No questions asked or answers given. Have I made myself clear? Do you understand?”

The rancher nods politely, apologizes, and goes about his chores.

A short time later, the old rancher hears loud screams and sees the officer running for his life chased by the rancher's biggest bull......

With every step the bull is gaining ground on the officer, and it seems likely that he”ll get gored before he reaches safety. The officer is clearly terrified. The rancher throws down his tools, runs to the fence and yells at the top of his lungs......

“Your badge. Show him your Fucking BADGE!

z

ABIGIDIOT

08/21/10 8:29 PM

Post #892

Re: #879: @Zardiw - He's gettin out today....Better watch your back....lol......et z

some of my crew.... we're headed out later to plan for the remote chance theres a downturn in the market :

ABIGIDIOT

08/21/10 8:24 PM

Post #891

Re: #859: @fixedops - lets see here... looks like luv past out

this cat is worse than ABIGHAMMER :

not quite as bright, however. LOLLLLZZZZ

ABIGIDIOT

08/13/10 3:49 PM

Post #890

Re: #889: @Lawrence 147 - Business for myself been there done that too

heh..heh..heh... tell it to the hand. i like that.

i'd consider that, if the hand was attached to a brain, but i can see my effort would be futile at best.

Lawrence 147 Free

08/13/10 3:18 PM

Post #889

Re: #887: @ABIGIDIOT - i call you son, since you clearly need

Business for myself been there done that too hard to find competent workers. As for being given guidance the day some pimple face kid who’s nuts haven’t even fallen sitting on his mommas couch is qualified to give guidance to me is the day I have my kid bring me my 44 and I blow my brains out.
Now let’s look at that fired part; clearly one would need to collect a paycheck to be fired, I collected none from you that is clear, just because you pissed on your own cheerios you feel the need to place blame where it clearly does not belong. Your logic is clearly twisted and liberal; you must be a liberal because that is what they all do, blame their failures on someone else.
Now then should you feel the need to respond, just tell it to the hand that’s all you will be posting to.

ABIGIDIOT

08/13/10 3:16 PM

Post #888

Re: #886: @Lawrence 147 - I will take that as a compliment coming

LOL !!!! nice try Jr.

as even you can see, i quoted your error, before your editing, which of course you applied after my posting.

ABIGIDIOT

08/13/10 3:07 PM

Post #887

Re: #886: @Lawrence 147 - I will take that as a compliment coming

i call you son, since you clearly need guidance in many areas. one, of course blatant area would be spelling.

the "complement", you mean, would be "compliment".

and of course, dont consider it as such. and, to further things, perhaps elder is correct, but "betters" ??

your junior league knowledge of tools, and less than professional abilities in the trade have left you unemployed on two fronts:

a. fired as ASS. MOD of ABIGHAMMER'S TOOLS OF THE TRADE(s)

b. real life

someday, if you ever have the wherewithal to go into business for yourself, for the first time in your illustrious career, you may call upon me for some counsel. until then, bow to the master, son.

I will take that as a complement coming from the master of broken post.

And calling me son is very disrespectful to your elders, if not to say the least betters.

Lawrence 147 Free

08/13/10 2:59 PM

Post #886

Re: #885: @ABIGIDIOT - dont worry son.... you surely dont need my

I will take that as a compliment coming from the master of broken post.

And calling me son is very disrespectful to your elders, if not to say the least betters.

ABIGIDIOT

08/13/10 2:56 PM

Post #885

Re: #882: @Lawrence 147 - Will do, I guess when my post start

dont worry son.... you surely dont need my critique on any of your posts for them to fall apart.

they do quite well on their own.

Lawrence 147 Free

08/13/10 10:08 AM

Post #884

Re: #883: @Zardiw - Check out JBII.....got a permit due any time

Looks like that one is just a little out of my league LOL I only got into WAM*Q’s to flip and wound up married, hell I was just looking for a one night stand and now I have a ring. Honestly though I do mostly subs, not quite as risky.

Zardiw

08/13/10 10:00 AM

Post #883

Re: #882: @Lawrence 147 - Will do, I guess when my post start

Check out JBII.....got a permit due any time now........et z

Lawrence 147 Free

08/13/10 9:55 AM

Post #882

Re: #881: @Zardiw - Stay tuned....lol......et z

Will do, I guess when my post start falling again I’ll know he is out. Take care, good to hear from you again.

Zardiw

08/13/10 9:52 AM

Post #881

Re: #880: @Lawrence 147 - I thought he was out, oh vhey good

Stay tuned....lol......et z

Lawrence 147 Free

08/13/10 9:50 AM

Post #880

Re: #879: @Zardiw - He's gettin out today....Better watch your back....lol......et z

I thought he was out, oh vhey good behavior or some kind of early release.

Zardiw

08/13/10 9:48 AM

Post #879

Re: #878: @Lawrence 147 - Of course you can’t find the symbol, if

He's gettin out today....Better watch your back....lol......et z

Lawrence 147 Free

08/13/10 9:40 AM

Post #878

Re: #877: @Zardiw - COOL. But I can't find the symbol. HAMR?,

Of course you can’t find the symbol, if we told everyone what the symbol is them everyone would want to buy it and I would no longer be able to pay my taxes. I don’t know where hammer is my post stay up longer now I think he must be on vacation again.

Zardiw

08/13/10 9:36 AM

Post #877

Re: #876: @Lawrence 147 - This is the best stock ever; better load

COOL. But I can't find the symbol. HAMR?, HMMR?....et z

Lawrence 147 Free

08/13/10 9:34 AM

Post #876

Re: #874: @Zardiw - Is this a good stock?..........et z

This is the best stock ever; better load up on em while they are cheap because I have it on good authority and from a reliable source tomorrow the company is going to release a 10K that will show the company is worth a thousand times what it trades for today . The best part is that in the 10 K the company states it will start dispersing dives and the record date is Friday.

Zardiw

08/12/10 11:30 PM

Post #875

Re: #868: @ABIGIDIOT - http://www.youtube.com/watch?v=c0IazE79rdc&feature=related

Wassup:

Zardiw

08/12/10 11:27 PM

Post #874

Is this a good stock?..........et z

Lawrence 147 Free

08/10/10 9:41 PM

Post #873

Well …Well… Well, I see the braggadocios owner of the board has given us all of his vast experience as to how he breaks hammers. Bawh ha ha waaaa; indeed the picture of the hammer in my sig is of a very inexpensive hammer , again a tribute to the jail bird. This is what the second time since you started this board? I can also see you are lacking in experience as you have listed the ones you have.

Now then, it is clear he has never driven a faster large enough to present a problem to even the best of hammers. Try driving some 60d’s through some old growth Fir some time as in some over 100 YO beams that were cut from the Virgin Forest of the North West and tell me that you have never knocked the head right off of a hammer. I can assure you it is a knuckle buster and a half as the head of the hammer rest against the head of the spike and the handle travels on past, especially on a 16/12 pitch while standing on a 2X10 plank and this is well before anyone ever got the idea to tie off to the roof somewhere.
As for pre drilling well that was done on the planking that was being nailed down so as not to split it, but the beams were not and I was just a nailer putting it down just as fast as I could, just as I was told to do.

And if I defiled your wall well too bad at least some one wanted to get some action for your board.

ABIGIDIOT

08/09/10 11:05 AM

Post #872

Re: #867: @fixedops - sup csmf's........................

welllll...well....welll... i see one of the former ABIGHAMMER Ass. mods posted a video in my honor, while of course i was in the hooskow.

imagine that. what a nice tribute to me!!!

funny though.... i notice his new siggy shows a broken hammer. theres only a few ways to break hammers, and mostly only happens to relative novices. however, it apparently suits him well.

a. buy shitty hammers.

b. too much stress pulling bent nails out.

c. keep missing the target [nail] and hitting the shaft against something instead.

tsk...tsk...tsk.... sighhhhhhhhhhhhhh... another disappointment in my character assessment.

Lawrence 147 Free

08/01/10 1:17 AM

Post #871

fixedops

07/25/10 10:30 PM

Post #870

Re: #868: @ABIGIDIOT - http://www.youtube.com/watch?v=c0IazE79rdc&feature=related

TOO Funny.................

ABIGIDIOT

07/25/10 10:26 PM

Post #869

Re: #867: @fixedops - sup csmf's........................

LMAOFFF

ABIGIDIOT

07/25/10 10:24 PM

Post #868

Re: #867: @fixedops - sup csmf's........................

fixedops

07/25/10 9:54 PM

Post #867

sup csmf's........................

luv2shop

07/24/10 10:48 AM

Post #866

Re: #865: @fixedops - http://www.youtube.com/watch?v=_5v9ZVoGC2I&feature=related

fixedops

07/24/10 8:13 AM

Post #865

Re: #807: @luv2shop - http://www.youtube.com/watch?v=RXLHUThBib8&feature=related

luv2shop

07/24/10 2:07 AM

Post #864

so for the record...hung over...already started even after a nap. and Nat is still hot. catch up with all you csmf's when i recover.

luv2shop

07/24/10 1:56 AM

Post #861

Re: #812: @ABIGIDIOT - u could have picked a better version.

my brother dated a girl from Brown...he had a t shirt with a slogan "Brown University...graduating generations of women on top"

ABIGIDIOT

07/24/10 12:25 AM

Post #860

Re: #859: @fixedops - lets see here... looks like luv past out

shes a liteweight. not like " 11 shot Ilene" ...LMAOFFFFF

fixedops

07/24/10 12:22 AM

Post #859

Re: #851: @luv2shop - sleep well!

lets see here... looks like luv past out at 11:59:17 PM...

fixedops

07/24/10 12:19 AM

Post #857

Re: #856: @ABIGIDIOT - now i'm confused. Come on Ilene?

to each his or her own...LOL

Older

ABIGHAMMER''S TOOLS OF THE TRADE(s)

Followers	7	Posters	36
Posts (Today)	0	Posts (Total)	911
Created	05/13/10	Type	Premium
Moderator ABIGIDIOT
Assistants

A place for i-hubbers to come to for support, Q & A, not only for their homeowner tools, but vocational tools, too. From dentists to drummers to doctors to dabblers of all types.
We will perservere to assemble the best talent to get the job done. i-box will be chock full of great info !!!
So, welcome to all, just play fair and square. and remember, me and my staff always have a trained eye on ya !!!

ABIGHAMMER's TOOLS OF THE TRADE

Nice video from SIDEDRAFT showing a table saw safety device. pretty cool !!! and, effective. http://investorshub.advfn.com/boards/read_msg.aspx?message_id=50108818

DeWalt DCD950KX 18-Volt Cordless 1/2-Inch Hammer Drill Driver DeWalt DCK265L 18 Volt Cordless Compact Li-lon Drill/Impact Combo Kit Wilton 3230K - 5 x 8 Horizontal Metal-Cutting Bandsaw - Wet, 1/2 HP JET 414486 - 14 Capacity 1HP 1Ph 115/230V Vetical Self-Feed Bandsaw

655PM Duo-Fast Model DF350S

Mobile Sawing & Routing Center-Woodworking Plan

Image for SSU:109-766

Extreme Tools Professional Series ToolBox — 11-Drawer Bottom Roller Cabinet, 56in., Blue, Model# EX5611RCBL | Buy now for just $1299.99!

OBD I & OBD II Code

BEIJING BILL SAYS BUY FROM One of ABIGHAMMERS Tool Girls
CHINA SANK YOU VERY MOOCH MADE IN THE USA

Chicago Dreis & Krump hydraulic brake press with NC control Combination Hydraulic Shear and Brake Press - made in Canada Photo of HMI Ironworker / Punch Press - dual operation model

Model R-18043X CNC Horizontal Point To Point Borer

MODEL CR26872 ABRASIVE BELT GRINDER

------------------------------------------------------------------------------------------------------------------------------------------------------------

HOT FOR TOOLS

http://www.youtube.com/watch?v=AOsmhRkLw_4

http://www.youtube.com/watch?v=aL7xAqwmvVE

http://www.youtube.com/watch?v=cbVKS6NX9t8

http://www.youtube.com/watch?v=Gz2dcPrJpH4&feature=related

http://www.youtube.com/watch?v=3t036YiYdI0

http://www.youtube.com/watch?v=lArOavQYzf4&has_verified=1