Register for free to join our community of investors and share your ideas. You will also get access to streaming quotes, interactive charts, trades, portfolio, live options flow and more tools.
This was all predictable a long time ago
#MDMP; GOOD IDEA....
Welp, I guess that back pressure regulator or the new downhole configuration didn’t work, What’s next? Shut it in for test? Lol
Time for more word salad, let’s get a new tweet.
$CDSG mooon
The info they put out is often meaningless. Wgaf about a back pressure regulator? Tell us oil volumes
Just info, funny how people complain when a company wont put out info, and they complain when they do....lol
Go $MDMP!
Primed and ready to Rock!
Just loaded another round!
Go $MDMP!
Possible they could double their production to 1 barrel of oil per day
What could go wrong issuing millions of shares at .005
I have seen lemonade stands with more revenue. Bwahaaaaaa
Nice Financials.
https://www.otcmarkets.com/stock/MDMP/financials
Operating Expenses. Research and Development.
NADA. ZILCH.
How can that be????
Suckers
Nu Tech Energy has a good search engine. Type Angelo in it. Location is on top and to the right of 'CONTACT US'.
http://www.nutechenergy.com/
You are being played
If there is plenty of fluid, setting the pump below the perforation is ok. The reason to set it above the perforation is to keep the perforations from sitting dry without fluid. This prevents the perforations from scaling up. The only reason to set the pump below the perforations is to keep it from gas locking. If there is plenty of fluid, the pumps will no gas lock so no need to put them below.
$CDSG too massive
'pepeoil
I live in Ohio and MB operating drilled a well in 1990 on my farm , the zone was 4500 feet deep and they drilled 200 feet deeper and set the pump on the bottom and never had any trouble
To keep from sanding up the pump would be the only reason. If fluid starts running out, lowering the pump to 30 to 50 feet above may help.
pepeoil
Why would they set the pump several hundred feet above the frac zone ?
Reconfiguring downhole equipment. Lol. When the wells start running out of fluid, they will try anything. Obviously it was pumping fine when it was moving frac fluid. Now that the frac fluid is diminishing, not so much. Lack of fluid? Gas locked? Hail Mary? Lol. That is usually what promoters do when a well runs dry. Anything to perpetuate the scam. Buy more time…….lol.
I don't see where Nu Tech covers the area(s) mentioned in the press release.
http://www.nutechenergy.com/Regional-Studies/
Tisk Tisk
San Angelo Sands?
http://www.nutechenergy.com/Regional-Studies/
Show me the study. You are being played!
Yeah nice action but this stock hasn't been getting the views.... in the mean time, I'm still BUYING!!
GO $MDMP
Wow some nice action this afternoon
MDM Permian, Inc. Lindley #4-A Drilling Schedule
News Link: https://www.otcmarkets.com/otcapi/company/dns/news/document/57711/content
Carrollton, Texas, March 08, 2022 - MDM Permian Inc. (OTCPK: MDMP) today has announced that plans have been completed to begin the drilling of the Lindley #4-A well in Irion County, Tx.
IRION COUNTY, TEXAS – LINDLEY #A-4
The Lindley #4-A well location is currently permitted to a depth of 2000 ft. targeting the prolific San Angelo Sands. A Tinsley Drilling Company rig is scheduled to move onto the location during the last week of April. The location is very small with rock is at the surface, so steel pits will be utilized and provided by Tinsley. Hot Splash Mud Co. will supply the drilling fluids and PSI Wireline will provide logging services.
NuTech Energy has provided an impressive log analysis and an Advanced Reservoir Characterization of the target zone on the nearby Lindley #A-3 well, which was drilled in 1984, produced from the Canyon Sands at a depth of 6700 ft. and recently plugged due to shallow casing leaks and poor casing integrity.
The Lindley #A-4 location is a direct offset to the #A-3. The expected section is 30 ft. thick and shows high permeability and oil saturation. NuTech analysis indicates that the zone has the potential for over 100,000 BO over the life of the well.
MDM Permian, Inc. will provide more updates as drilling of this exciting well begins.
50 barrel frac fluid -00 crude
40 barrel frac fluid -smell of crude
30 barrel frac fluid -3 barrel crude
20 barrel frac fluid 10% crude
10 barrel frac fluid 20 % crude
????????
to much pump and dump
jmho
5%, 10%, 30%..... what will it be by weeks end??
Don't get caught out of the money!
Here we go!!
General Production for MDM ENERGY, INC yielded absolutely nothing of recent.
For Initial View, click the operator button.
My Date Range was January/2019 thru February/2022.
Other criteria was Onshore County. Which was populated with Midland, Glasscock, Crocket and Howard.
Operator is MDM ENERGY, INC.
http://webapps2.rrc.texas.gov/EWA/productionQueryAction.do
It's a turd. Flush it!
From this page:
http://webapps.rrc.texas.gov/GW10/gw10PublicProcessLogSearchAction.do;jsessionid=csZWNLLb9LUSu7O9PtWQCH5bYqKx086wVpaVj79QQjjDxym_yMIo!-1681704575?methodToCall=init&formData.headerTabSelected=home&formData.pageForwardHndlr.inputValue=home
Select 'Search Operator' located to the right of the OPERATOR NO. field.
On the next page, in the Search by Operator section, select the 'Containing these characters' button. In the Operator Name, type MDM, then select the SEARCH button.
I take it they are now MDM Energy? Anywho, click on MDM ENERGY, INC (556516). Then click the Select Operator button. Doing so will place 556516 in the Operator No. field on the Well Status Report Query.
Yes, there is an easier way, but you'll have to figure that out on your own.
On the Well Status Report Query, with the Operator No. field populated with 556516, click the Search button on the bottom left.
My returned result was: (GW10_117) No results found. How can this be you might ask...?
You are being played
MDMP is a total scam. Read my history on this board. Plenty of links to the Railroad Commission of Texas website. Folks need to do some research and not rely on a tweet. Sad and true!
Man tha was a good one
old Cabble1212 is sure a pumper
jmho
Probably, his car uses more oil than these clowns make
old Cable1212 over on the other site has not posted anything with the news out . I wonder if he got out early ??
jmho
'pepeoil'
in other words just a pump and dump
jmho
Well, the report that they put out was certainly less than impressive. They claim to recover a little oil, water and gas bubbles after perforating. Then swabbed dry. Without more info, I would find it difficult to frac a well with that info.
'pepeoil
The zone had water in it before it was frac correct ?
Now most energy companies would say the zone was wet correct ?
jmho
Yep, how do like these oil cut percentage updates? Sounds better than saying in made 2 bbls of oil or it put nothing in the tank because the heater treater or gun barrel is being loaded up. Lol
100 % correct
jmho
In my opinion they seem to lack the resources to get the job done or maybe they’re just playing us and not really trying “electric motor bearings repaired” coming up with excuses… Stall tactics adding more to the outstanding shares there’s a lot of fishing sneaky things going on and a lot of sheep are buying it.
100 % correct
just a pump and dump , no market for frac water in Texas as far as i know ...
jmho
According to twitter posters, the 200 barrels of water per day is supposed to turn to oil. What happened? 3 barrels of oil? Bwahaaaaaa
And what was it last week? oh, the smell of oil.... to now 5%, I think I can wait and be patient!
what was the production report today ?
5 % crude , maybe 3 barrel if they pumped 50 barrle total
just a pump and dump
jmho
Followers
|
136
|
Posters
|
|
Posts (Today)
|
0
|
Posts (Total)
|
5644
|
Created
|
01/24/13
|
Type
|
Free
|
Moderators |
Audit Services
MDM Permian, Inc. is in the final stages of our audit being performed by M&K CPA’s, Houston, Texas (performing both Tax and Audit services). They will be doing Federal tax returns for both MDM Permian, Inc. and MDM Energy, Inc. They are also performing an audit looking back 2 years that will allow for the company to move to QB. M&K is a PCAOB Registered Firm and can be found at www.mkacpas.com"
3/31/22: “We are excited about the progress we made over the last year.” states Mr. Michael Rafael, President of MDM Energy, Inc. “The company raised a considerable amount of money to fund operations, purchase production, enter rebranding and marketing agreements in preparation for a much larger funding effort for 2022.” MDM Permian, Inc. has also engaged M&K CPAs to conduct an audit that is expected to be completed in April of this year. “Once we have our audited financials, we will apply to up-list to QB status and become fully reporting.”
https://www.otcmarkets.com/stock/MDMP/news/MDM-Permian-Inc-Annual-Report-and-Disclosures-Posted?id=350297Volume | |
Day Range: | |
Bid Price | |
Ask Price | |
Last Trade Time: |