Instigating Alerts

[$tock Rev]

symw PPSI will be responsible for the marketing of the fuel cell, fuel cell hybrid power systems and related technologies

[$tock Rev]

symw SymPowerco and Hybrid Energy Technologies Inc. are partners in the development of hybrid power systems through their jointly owned subsidiary, Polygenic Power Systems Inc. (SymPowerco 70%, HET 30%)

[$tock Rev]

symw The discussions relate to HET's flat plate battery technologies and SymPowerco's Flowing Electrolyte Direct Methanol Fuel Cell (FEDMFC) and how certain design and manufacturing facilities and processes might be combined in shared facilities

[$tock Rev]

symw........Eliminates the large charging stations where the vehicles are “plugged in”

[$tock Rev]

symw imagine the possibilities with charging while running for light aircraft as well

[$tock Rev]

symw Recharges its own batteries while it’s running, never needs to be “plugged in”.

[$tock Rev]

symw Requires far less energy to run due to the reduced weight.

[$tock Rev]

symw......Reduces vehicle structural weight because of less battery weight

[$tock Rev]

symw Eliminates over 60% of the battery weight and cost.

[$tock Rev]

NXPN is considered a Small Cap stock with a market capitalization of $23.9M

[$tock Rev]

SYMW.....GARDNERVILLE, NV--(MARKET WIRE)--May 27, 2009 -- SymPowerco Corporation (Other OTC:SYMW.PK - News) CEO John Davenport announced today that the company's majority-owned subsidiary, Polygenic Power Systems ("PPS"), has been notified that its application for grant funding from a major North American Government Agency has been approved. The funding, when received by PPS and its partners, will support SymPowerco's Flowing Electrolyte Direct Methanol Fuel Cell (FEDMFC) advanced development program

[$tock Rev]

SymPowerco's extensive grant application included detailed development plans for the FEDMFC project including engineering objectives, scalability testing as well as detailed manufacturing and marketing plans. As a result of the funding approval, SymPowerco intends to complete and implement its development plans with its project partners, Hybrid Energy Technologies, Inc. and Carleton University in Ontario, Canada. Development activities under this project are expected to start in late summer or early fall of 2009.

[$tock Rev]

SYMW.....Stated SymPowerco President and CEO, John Davenport, "We at SymPowerco are very pleased that our grant application has been approved. Like all such applications, our application was subject to rigorous academic and industrial peer reviews before final acceptance. We have successfully completed that process and we can now move forward with our plans. We believe that our Flowing Electrolyte Direct Methanol Fuel Cell will be a strong candidate for a wide variety of Hybrid Power System and Fuel Cell markets

[InstigatingAlert]

SPTN $ 27.28 must hold $ 26.85.

.

IA.

[InstigatingAlert]

UXG $ 5.76 must hold $ 5.73.

.

IA.

[InstigatingAlert]

REFR $ 11.02. Must hold $ 10.76.

.

IA.

[InstigatingAlert]

TRAD $ 12.10. Support is $ 11.99.

.

IA.

[InstigatingAlert]

BLTI $ 6.22 I'd wait for a breakout at $ 6.42.

.

IA.

[IzY]

Guys What do you think about this chart ?

I have been in it since last week and it has bounced around a bit and maby now there could be a break out with a little help from news,and it´s good news a realy handsome board they got themselves
there..

What´s your opinion guys?

IzY

[december]

getting ready for the pop........

[IzY]

Great thx,i will take a look..

IzY

[december]

In the $4-$6 million range

[IzY]

Any idea how big they are?

It´s a volatile stock hehe,to bad i didn´t know about this one at 0.015 :)


IzY

[december]

BIG contract news coming

[IzY]

Any trigger in the near term,as of news aqusitions etc?

IzY

[december]

DMTN

Low floats and rising revenues..

[IzY]

Chart of SFNN...

[IzY]

Hi December..

Do you care to tell me more about that company of yours?

Thank you in advance.

One i also like is SFNN..

Good news release today,and the chart may build up for a breakout.

[december]

D Mecatronics Projects Large Revenues and Earnings, and is Pleased to Announce Another Contract


2007-04-09 08:00 ET - News Release

MISSISSAUGA, Ontario, April 9, 2007 (PRIME NEWSWIRE) -- D Mecatronics Inc. (Pink Sheets:DMTN) announced that its financial projections demonstrate the company will enjoy sizeable leaps in revenues and earnings over the next three years. According to its most recent forecast, D Mecatronics expects its total income in 2007 to be $10,120,000, increasing to $15,920,000 in 2008 and climbing to $21,100,000 for calendar 2009. Projected revenues will be derived from one primary source: design and manufacture of automated assembly line systems, used primarily by the automotive industry. The projections have been published in a revised business plan that includes in-depth background information on the company, its structure and management team, descriptions of its products and services, operational plans for its profit centers, as well as management's certified financial statements.

"I believe our projections to be a robust estimate of where D Mecatronics is headed from an earnings perspective," declares D Mecatronics CEO Berardino Paolucci. "In the upcoming year, we will continue offering a succession of extraordinary products and services that will undoubtedly trigger a substantial increase in our revenues. I fully expect D Mecatronics to achieve profitability this year and will provide our shareholders with remarkable financial gains over the next three years."

D Mecatronics offers a diverse range of automation services utilizing the latest proven technologies. D Mecatronics provides robust, scalable, user friendly and nonproprietary solutions that seamlessly can be integrated into existing platforms and systems. D Mecatronics focus's on all the crucial factors like production efficiency, product flexibility and traceability, maintenance and plant performance, and regulatory compliance during all the phases of a project -- from the initial design development to the installation and to future expansions. With high-quality products which reduce manufacturing costs, improve production capacity, decrease downtime, improve reliability and reduce waste, D Mecatronics is proud to announce the receipt of a purchase order valued at US$115,000, to integrate accurate and precise automation to an existing production line.

"High ethical standards and excellent customer service are the core philosophies of our business. We believe in always exceeding customer expectations and in providing extensive support from the design phase all the way through start up," states Drasko Karanovic (President of D&R Technology a wholly owned subsidiary of D Mecatronics Inc.). Mr. Karanovic continues to state, "As systems integrators, we provide solutions that are driven entirely by our customer's needs. Our ability to listen, understand and respond to our customers' requirements is key factors in our success."

The D Mecatronics Inc. logo is available at http://www.primenewswire.com/newsroom/prs/?pkgid=2180

Forward-looking statements in this release are made pursuant to the "safe harbor" provisions of the Private Securities Litigation Reform Act of 1995. Investors are cautioned that such forward-looking statements involve risks and uncertainties, including without limitation, continued acceptance of the Company's products, increased levels of competition for the Company, new products and technological changes, the Company's dependence on third-party suppliers, and other risks detailed from time to time in the Company's periodic reports filed with the Securities and Exchange Commission.

CONTACT: D Mecatronics Inc.
Dino Jr. Paolucci, Vice President & Director
[phone]
[e-mail]
www.dmecatronics.com

[december]

PMCL.PK (Up 29%) , DMTN.PK (Up 33%) ------ Looking Good For This Week

PMCL.PK - Last @ .045 - Up 29%
http://www.stockscores.com/quickreport.asp?ticker=pmcl

DMTN.PK - Last @ .04 - Up 33%
http://www.stockscores.com/quickreport.asp?ticker=dmtn

[IzY]

ILI TECHNOLOGIES RECEIVES US$ 9.5 MILLION ORDER






2007-03-30 16:44 ET - News Release

Mr. Serge Bonnet reports

ILI TECHNOLOGIES RECEIVES US$ 9.5 MILLION ORDER

ILI Technologies (2002) Corp. has received a $9.5-million (U.S.) ($11-million (Canadian)) order for its Thermoflex tubing and associated connectors, and its ESP pump products. This is by far the largest order ever received by ILI and marks the entry into a much larger revenue base for the company.

The first delivery under this contract is scheduled in the second quarter of 2007, to a large Mexican corporation. ILI will use the next few months to produce the product necessary to deliver on this initial purchase order, as well as to build up inventory of Thermoflex tubing for subsequent instalments of the contract throughout 2007 and 2008.

"This is a significant order for our organization, and changes the dynamics of our sales, rentals and distribution activities," stated Serge Bonnet, president of ILI Technologies. "We will strive to deliver on this contract as quickly as possible while continuing to pursue additional significant orders for Thermoflex tubing, and CBM pumps and wire products."

While ILI had dramatically higher corporate sales with the commencement of sales of Thermoflex tubing last summer, the company has only established regular sales channels in Mexico, and continues to pursue additional distribution in the United States and Canada. Thus the sales potential of Thermoflex tubing remains relatively untapped. ILI is also planning the expansion of manufacturing facilities for Thermoflex tubing in order to accommodate expected future orders.

Thermoflex tubing is used primarily in Mexico to replace old flow lines which are in need of replacement or repair, as well as by companies looking for longer-lasting and more efficient methods of flow lining new wells. The product has been proven to be quick and easy to install, and can withstand pressure and corrosion better than standard piping methods


And they are hosting a conference this weekend,takl about all the media attention they will get :)


Oh did i forget to mention IT´S IN US$

Great weekend guys.

IzY

[InstigatingAlert]

LPTH would have been wise to be out at $ 7.00's.

IA.

[InstigatingAlert]

MECA $ 3.77 party finished for this.

IA.

[IzY]

One other annoying thing is my order at DTA,itried to pick up 46000shares at 12,5 cents and the same happend to that one it got no where h.a.h.a

Now DTA is trading at 15 cents,that would have been enough for me :)

Not a friend and pleased with my broker today..

IzY

[IzY]

Yep sama as my thinking to,well today i tried to sell some ILI.V
at 1,25 there was alot of buyers at that level.

BUT the broker i have use´s a middlehand and my order was in the market in my trading window though it did´t show up and was executed.

I called and called and he said there was a problem with their brokers in CAN,so GAH here i am am with a non executed order and the byers are at 1,08 haha.

This is the third time this broker messed up and without any consequence for them,it´s always the little guy that gets beaten.

Well as for ILI.V i would rather not sell them now as my intention was a small 5-10%trade and with the goal of owning them again today.

IzY

[nlightn]

IzY - well,...as the statement goes,..."plan your trade and trade your plan."

it would be to your advantage to set a stop loss right after you place your trade. to protect from any downside. then determine what you want from it?,...5%, 10%, 15%, 20% profit and set a GTC for that.

as the pps rises you might want to raise your sell order in accordance to the profit level you desire.

so the bottom line is to not get greedy and protect your investment,...but let your profits rise when the pps begins to move.

hope that assists.

[IzY]

Hi guys,a question when you post this charts are you in these stocks and how long do you hold them.

What i mean is what kinda profit are you expecting in each trade,and what are your stop losses?

Thanks in advance.

IzY

[nlightn]

NVEC,..poised for another run,...

[nlightn]

CVV,...GET READY for it to TAKE OFF!

[InstigatingAlert]

ZAAP $ 1.02

.

IA.

[InstigatingAlert]

ABY $ 2.80.

breakout to be confirmed at $ 2.84.

.


IA.

[IzY]

CBS.V is also on the move,it could be results are in.

If they are good we´ll probably have a breakout from 40 cents.


Keppeing my fingers crossed.

IzY

[IzY]

The post last friday was when the stock was at 1,03cad :)

One has to be quick..

IzY

[IzY]

Well i am in at 93cents+add 8000shares at 1,05 friday..

I will definitely keep them untill the company gets that order :)

And IA nothing is to late in this company,calculate on the value and you will find out.


IzY

[december]

The next CFRI...............

http://www.investorshub.com/boards/read_msg.asp?message_id=18189495

[InstigatingAlert]

MECA $ 3.33

.

IA.

[InstigatingAlert]

ILI.V time to watch was a week ago, too late now, there are better plays out there.

IA.

[IzY]

Also watch ILI.V


And do your DD :)


Regards IzY

[IzY]

CBS.V


Well not based on the charts CBS ha had 2 good rounds of trading.

A realy good one yesterday whan i got myself a gain of 17% and a another small one today.

Molly stocks is just to hot to stay out of,but as usuall everything that goes up has to come down :)


I will try to get in at a good price again,and this time i will not drop the core position just in case we get good news.

IzY

[nlightn]

IA- i think you are correct that CBS.V could get a little cheaper. at least T/A it is looking that way.

haven't looked at it other than a technical play,...i'll take a view of the www. and see what is there.

TIA for posting CBS.V