InvestorsHub Logo
icon url

scion

09/07/11 11:52 AM

#133122 RE: scion #133118

Additional testing using approved EPA methods will be required at the maximum nominal operating rate of 2000 lbs/hour (WITHIN 10% of 100% peak load) using typical procured feedstock material.

Testing must be completed WITHIN 60 DAYS after maximum production in a single unit is achieved but not later than 180 DAYS after date of permit issuance. A written protocol must be submitted a minimum of 30 DAYS prior to the scheduled test date and must be approved by the Department prior to commencement of testing.

Written results must be submitted to the Department WITHIN 60 DAYS after completion of testing. If all three rotary kiln process units are designed, constructed, and operated in an identical manner, only one unit needs to be tested to represent a typical process. If there is significant variability between the units in as-built construction or in operating parameters, more than one unit may need to be tested.


http://www.sec.gov/Archives/edgar/data/1381105/000121390011003255/f8k061411ex99ii_jbi.htm