Replies to post #52783 on QS Energy Inc (QSEP)

[Quick Sand]

Flu and Jolly

Thank you both for your reply.
And justifying why you remain invested.

It seems you both also agree that the Aot is NOT proven, contrary to repeated obvious lies being told here.

Good luck with your investments !

[zerosnoop]

Lets not forget in all the public filings & updates on the company's web site, it states the previous issues with the PROVEN AOT have been resolved. So it's full steam ahead for the company now.

https://s3.amazonaws.com/content.stockpr.com/qsenergy/files/news/2022/Component_Testing_August_9_2022.pdf

As stated in our previous “July Upcoming Component Testing” update, we anticipated that by August we would be conducting the component testing. As of August 8, 2022, we completed a successful component test. All parts arrived from our vendors last week and we built the stack assembly. All the parts fit as designed with no surprises.

The stack assembly performed as expected. We were able to apply the maximum voltage of the power supply to the stack assembly when submerged in oil. With this updated design, the power supply did NOT shut down due to arcing nor shorting which occurred with the previous design during various testing regimes. We achieved exactly what we hoped to and will now proceed to the hydrostatic test.

Based on the confirmation of these most recent and positive results using the fully assembled AOT, a medium gravity pipeline spec oil (API 23) was procured and pumped into the AOT. We ran the AOT with the reworked original grid pack for an hour at 10 kV and saw no anomalies and no short circuits, confirming our belief that the short condition was a result of failed insulation. We were then able to apply 20 kV to the oil despite utilizing a reworked original grid pack. This high voltage result seems to demonstrate that we have solved the problems reported in June of 2020. Subsequent testing in the laboratory showed the oil (API 23) would support a voltage of 40 kV. Between the laboratory data and issues found during recent component testing we are in the process of confirming the final design criteria for a new grid pack which represents the remaining 20% necessary for full treatment effect.

We have also validated that a new design concept for the grid pack will reduce arcing and allowed us to apply full voltage during a recent test. A 3rd party engineering firm with proper experience and three-dimensional modeling software was engaged.

In August 2022 we completed the testing of the stack assembly. The stack assembly did not suffer the arcing problems we saw when testing a stack assembly made from parts of the full size AOT. It appears that we have accomplished the goal of eliminating the sources of arcing that prevented us from achieving treatment voltages with this new design.

The power supply did not shut down due to arcing nor any other issues and we were able to test the stack assembly up to 40 kV in oil; the maximum output of the power supply. While we do not expect to see free water in pipeline quality crude oil, we wanted to see the effect of free water on the stack assembly. We added sufficient water to disrupt normal operation, but we were able to slowly increase voltage to treatment voltage over a time. This gives us confidence that if water were to enter the system, we would be able to return a full size AOT to normal operating conditions.

we would also consider designing, testing and commercializing a smaller scale AOT unit targeting upstream, trucking and rail applications. This strategy could reduce development time and costs, with the intention of moving back into the midstream crude oil pipeline market subsequent to successful commercial operations at a smaller scale.