Replies to post #39341 on Sigma Labs Inc (SASI)

[3dtdman]

T&L, thank you! Some very interesting info there:
"EWI will use Sigma Labs' PrintRite3D® system to collect in-process data during the coupon production by training the pyrometer sensor directly above one of the mechanical test coupons."

Goals:
•Develop core parameters for nickel alloy 400 on an EOS M280 laser powder bed fusion additive manufacturing machine.
•Generate preliminary XY and Z mechanicalproperty data and produce coupons for a weldability trial and salt fog testing
•Generate Post Process Quality Metric data (PPQM) and establish
In-Process Quality Metrics™ (IPQM™) from Sigma Labs' PrintRite3D® data collected during parameter development."

Also, interesting paper from Innovation Engineering - WordPress.com on the same Google site:

https://ikhlaqsidhu.files.wordpress.com/2015/08/3dp-paper.pdf

[MDuffy]

EWI will use Sigma Labs' PrintRite3D® system to collect in-process data during the coupon production by training the pyrometer sensor directly above one of the mechanical test coupons. https://ewi.org/eto/wp-content/uploads/2015/amcEWI715/MO_01_Summer_2015_Members_Only.pdf

Generate Post Process Quality Metric data (PPQM) and establish In-Process Quality MetricsTM (IPQMTM) from Sigma Labs' PrintRite3D® data collected during parameter development.

Also- in looking up your search- came across this:

http://additiveworld.com/upload/file/Sigma%20Labs%20Presentation%20AI%20Mtg%2020150304_REV1.pdf

We may have had this posted before- I just don't recall seeing SEVEN of our machines out there- including two in England, one in AZ, and one in Pennsylvania? Any theories?

[This was before we brought France and Belgium into the picture, too…]

[GetRich1day]

Nice find. Thanks T&L!