Frontier Lithium Inc (FL)

[MoneyMan]

HLM Identifies strong Rubidium grades up to 0.53% Rb20 over 14 meters on the PAK Rare Metals Project in Northwestern Ontario

Sudbury, Ontario –April 24, 2013 - Houston Lake Mining Inc. (TSX.V: HLM), is a mining exploration company which is actively exploring for the rare metals lithium, cesium, tantalum, and rubidium by currently focusing on its 100% owned and optioned PAK Rare Metals Project in northwestern Ontario, Canada. HLM is pleased to announce some of the remaining results from its 2012 Channel Sample Program on the Pakeagama Lake pegmatite, located at the 1,792 hectare (4,424 acre) PAK Rare Metals Project.

In September 2012, Peter J. Vanstone, P.Geo. the qualified person (QP) for the project, conducted a 91 sample channel sampling program on the Pakeagama Lake pegmatite in order to confirm historical results and to add additional channel samples while further sampling by distinct geologic zones. In addition to the high grade lithium oxide results up to 4.74 Li20 over 15 meters, and strong tantalum oxide results up to 192ppm Ta205 over 14 meters reported by HLM in January, 2013, the program has also identified rubidium (Rb) oxides in a distinct pegmatite zone as discussed below:

http://www.houstonlakemining.com/index.php/news-mainmenu-54/2013-news-releases/325-hlm-identifies-strong-rubidium-grades-up-to-0-53-rb20-over-14-meters-on-the-pak-rare-metals-project-in-northwestern-ontario

The Central Intermediate Zone (CIZ) is located in the upper portions of the pegmatite. It is in contact with both the Upper Intermediate Zone (UIZ) and Upper Wall Zone, and persists to the southeast edge of the outcrop where it is believed the pegmatite continues under the till cover. Channel 19 is located in the central portion of the exposed CIZ where the zone consists predominantly of grey K-feldspar with minor lithian mica + quartz alteration. To the southeast, the K-feldspar is altered to a mica+quartz mixture and was sampled by Channel 7R (highest rubidium grades found to date in the exposed pegmatite). Samples from this channel consisted of similarly sized fragments of randomly oriented K-feldspar with varying degrees of mica+quartz alteration. In the adjacent area to the northeast of Channel 7R, the alteration consists of K-feldspars more or less completely replaced with a lithian mica + quartz mixture where veinlets and patches of lepidolite occur. This altered zone, which was sampled by Channel 1, contains strong tantalum and rubidium grades over a significant width.

When considering the CIZ as outlined in Table 1, the distance between channels 19 and 1 is approximately 35m. Overall, this zone has an exposed surficial expression of approximately 100m in length and remains open to both the southeast and northwest.

The Pakeagama Lake pegmatite does not currently have a resource, however the mineralogy of the CIZ and the presence of lepidolite is similar to the CIZ described in the Tanco pegmatite. The Tanco pegmatite is located southwest of the PAK Rare Metals Project in southeastern Manitoba and has recently ceased mining production from their CIZ zone.

"In addition to the high-grade lithium results of up to 4.74 Li20 over 15 meters, and high tantalum results of up to 192ppm over 14 meters encountered and reported in January, these strong rubidium grades from the program entrench the Pakeagama Lake pegmatite as a leading high-grade, multi-element exploration target for rare metals in North America. Furthermore, within the next three to five weeks, HLM will begin receiving assay results from our Phase I, 1,000-meter diamond drill program that commenced in March." said Trevor R. Walker, President of HLM.

Due Diligence

All scientific and technical information in this release has been reviewed and approved by Peter J. Vanstone, P.Geo. who is the qualified person (QP) under the definitions established by National Instrument 43-101. Under HLM’s QA/QC procedures, channels are cut with a motorized circular diamond saw, and are 4 cm wide and 10 cm deep. The channels are oriented perpendicular to the strike of the pegmatite internal mineralogical zones and are cut continuously across the zones. The samples are removed using a hammer and chisel. The length of a channel is determined by the width of the pegmatite zone. Offset channels are cut where deemed appropriate. Sample lengths typically are 1 metre but can be less depending on zone mineralogy and boundaries. Samples are described, placed into a poly sample bag with a numbered sample tag and then shipped to the assay lab for quantitative analysis for select elements. All HLM samples are currently being assayed by Activation Laboratories Ltd. with all samples being delivered to their Thunder Bay facility. Sample blanks along with tantalum certified reference samples and lithium-rubidium-cesium standard samples are routinely inserted into the sample stream in accordance with industry best practices. At the completion of each program, approximately 10% of the channel sample pulps are submitted to a secondary ISO certified laboratory for assay verification.

About Houston Lake Mining Inc.

HLM is a mining exploration company that is specialized in rare metals and actively exploring for lithium, cesium, tantalum, and rubidium by currently focusing on its 100% owned and optioned PAK Rare Metals Project in northwestern Ontario, Canada. HLM has a total of 70,236,695 common shares issued and outstanding. For additional information, please visit www.houstonlakemining.com.

Company Contact Information

Henry J. Kloepper, CEO, Trevor R. Walker, President
2736 Belisle Drive
Val Caron, ON.
P3N 1B3 CANADA
T. +001 705.897.7622
F. +001 705.897.7618