Plastic2Oil Inc (PTOI)

[Artiztic1]

The video shows absolutely nothing under the hopper that could feed 2,000 lb. bails. It's telling that no bails are shown and the only plastic that is shown is flakes.

JB only says while standing near a bag of flakes that:

"The plastic here goes into this hopper and into what we call feeding the beast at 2000lbs per hour" 3:00 minute mark

Then he goes on to show plastic flakes going up the conveyor and says at the 3:09 mark:

"We take waste plastics the plastics go up the conveyor belt are fed into a spool the spool is where we remove any oxygen in the plastics with a nitrogen purge, the plastics then enter an auger the auger then feeds it into the pre-melt reactor"

You would think after allegedly losing half a year developing the pre-melt he would have shown or at least talked about being able to accept bails, whole plastics or ragger tail the very reason it was designed, it's certainly telling that he neither talked nor showed any bails or whole un-shredded plastics entering the pre-melt.