Plastic2Oil Inc (PTOI)

[fourkids_9pets]

CC QUESTIONS >>>> LAST CALL

i've sent off my question to IR
re: commercial roll out re: procs
and time frame >> if anyone wants
to add questions that *realistically*
can be addressed by mgmt during the CC
i'm more than happy to compile them and
forward on to IR by next friday (24th)

clearly there are no guarantees and if folks
would rather bypass a public arena they can
send their queries on directly to [e-mail]

edit>>>>

EMAIL IN FROM JBI's IR

Re: JBII CC

Hide Details
FROM:
John Zervas
TO:
XXXXXXXXXXXX
Message flagged Friday, February 17, 2012 2:25 PM
Dear Kris,

Thank you for your inquiry and your support for JBI, Inc. I look forward
to review the list of questions that you compile and will bring it to
the attention of senior management.

Thank you and regards,

John Zervas
JBI, Inc - Investor Relations

==================================================

if interested >> just copy each question and paste
in below the last one or respond to this post >> i
will try and update 2 x daily from now until the 24th

1) what is mgmt's definition of commercial roll out pertaining
to processors produced per month or Q in 2012 and what is the
expectation for going forward 12 months (2013)

sent via PM (used with permission) and from posts in direct response
to mine or containing CC questions >>

2) Will our current business partners ( Indigo, Xtr, and Coco) take all the output of 3 processors at maximum capacity?

3) Does Rock Tenn prefer to use all or a majority of the fuel output from the processors put at their facilities?

4) were the 2 30T kilns from China ever used (2&3 maybe)?

5) has JBI definitely decided to standardize with a 20T kiln size because of truck limitations for modular transportation to RKT sites?

5.5) My question, relative to questions 4&5: Has the pre-melt reactor (term used in the January 20th PR) eliminated the need for the rotating drum reactors completely?

6) One question which should be asked is when John plans to approach national media for a presentation of JBII.

7) What is JBII doing to combat the NSS/Manipulation of this stock. F/U: If management does not think the stock is being manipulated what is their explanation for the non-stop attacks? FWIW, I total understand if JB does not wish to expose his defensive tactics against manipulators.

8) Are there any other sites planned as JBII sites (no JV) like the NF facility?

9) Do they have the second RKT site on the drawing board yet?

10) whats the goal for quanitiy of p2o machines for 2012

11) JB's thoughts on PIPE's/Dividends/Spin-Off's/Buyouts/CopyCat Competition?

12) Have they truly completed the modularization of the entire system and are the fabricators and all involved ready at hand to fill orders?

13) With 2 & 3 up and running and the new building finished, what does JB think will be the company's biggest hurdle to overcome?

14) How hard is it to switch the machine over to procuce naptha for the massive deal with XTR?

15) Can we just dedicate a processor for each type?

16) How do you define "cash flow positive" as used in the following, from the last 10Q?:
"Management’s highest priority continues to be bringing processor #2 and #3 online so the Company can become cash flow positive."

17) How soon will the new building be ready to start manufacturing the modular processor systems

18) What are realistic goals for the number of processors running in 2012 and 2013? And how are they going to be financed?

19) How much fuel is processor #1 producing/selling on a consistent weekly basis?

20) What’s the percentage of plastic derived fuel, that’ll be blended with purchased third party fuels for resale to XTR?

21) How many processors will be needed to meet the full quantities required by XTR, to fully eliminate the need to blend plastic derived fuel with third party fuels?

22) Has any blended fuel been delivered to XTR to date?

23) What’s the maximum output of Naphtha per processor?

24) Will the time to process change, by tuning the processor to produce more Naphtha?

25) The DEC recently increased feed rate to 4,000 lbs. or two tons per hour per processor. This increase would result with a need of approximately 120 tons of free plastic needed per day, for running three shifts with an hour down time per shift at maximum input feeds. Is the company currently receiving at least 120 tons of free plastic that can be processed per day to meet this need?

26) What’s the total current cost of materials, labor and time to build each new processor?

27) Is the number one processor operating at the full allowed capacity yet, if not when, same question for 2&3?

28) Will 2&3 need to be tested to satisfy the DEC prior to running commercially?

29) What is the company’s expected net profit or earnings per share, per processor - on an annual basis, for Niagara Falls plant vs the first Rock Tenn site?

30) How long before the company expects fuel to be produced from the first RockTenn site?

31) Is there a profit sharing agreement on the scrap steel from the raggertail, or is all the scrap steel property of JBI?

32) Can the scrap steel be sold in its expected condition after plastic processing, or will further cleaning be necessary?

33) What’s the current market price for the type/grade of steel in the raggertail after processing?

34) How many barrels of fuel are currently in inventory, for each type of fuel that was produced from plastic?

35) When the company uses “In Spec” in their fuel definitions are they saying that the fuel produced is within the “ASTM” specifications for that particular grade, if not what specification are they referring to?

36) What is the longest time processor one has run for at one time? How much plastic did it consume in that time? How much sellable product did it produce during that run (#2/#6 or whatever)? How many people were involved in any way in running the machine during the entire run? What was the source of the plastic? What did it cost ie if free was freight paid by the provider or JBI? Was all the output either sold or used for customer testing? Was this run before or after the pre-melt was added? Was the processor running at capacity the entire period?

37) If they can provide any info on uplisting that would be appreciated.

38) Given that the processors are most efficient when run without shutting down, when can we expect to see 24/7 operations, with minimal time for shutdown? The January 20th PR ( http://www.plastic2oil.com/site/news-releases-master/2012/01/20/final-report-from-recent-plastic2oil-stack-test-reconfirms-process-viability) stated "Normally, residue and metals would be removed from the pre-melt periodically during operation." Does this mean that residue/metals can be removed without shutdown of the system?

39) Has the company secured the commitments from outside sources to provide enough waste plastic to allow 24/7 operations at the Niagara Falls facility on an ongoing basis?

40) Given that the processor can only achieve a maximum output of naphtha of 40% (60% diesel), how will the company achieve XTR's delivery requirements? Will XTR only be accepting road-ready naphtha, or will they also be accepting road-ready diesel?

41) Will we be given the opportunity to see the newly configured system(s) in its entirety?

42) has the modular processor build-out -start/finish time frame been established, or is major tweaking still evolved?

43) How soon will the new building be ready to start manufacturing the modular processor systems?

44) Any input on this year's AGM?

45) Question about processor downtime: According to the 10 q the processor does not need to be stopped for cleaning of residue. Also, the catalyst allows the processor to operate at lowish temperatures.
So, what are the reasons the processor may need to be stopped each day? How about the pre-melt? Can that be run 24/7 no problem?


====

apologies if i've missed any ~ i will keep adding any and all
questions up till tomorrow when i'll send them onto IR some
time after noon so IR has time to review and cull b4 sending
them off to mgmt

i went back and realized i had posted snow's question (no. 6)
re: media twice (pulled no. 38 as a duplicate question)

38) When does JBII expect to approach national media for a presentation of JBII.

oh and i got my CC email :)

====
4kids
all jmo