AI
Monday, May 02, 2011 1:16:49 AM
JBII -- NEW PICS AND NEW INFO ON THE WEBSITE:
"JBI anticipates a rapid expansion of P2O sites using modular prefabrication techniques."
"The residue was tested and has a heating value of 10,600 BTU." <~~~and can be sold?
"The residue removal system works while the processor is producing fuel so the process does not have to be cooled down to remove residue."
"The process has significant redundant quality controls to ensure fuel quality."
"significant technology to guarantee fuel quality"
"Additives are injected while fuel is made to enhance effectiveness."
"JBI's system costs a small fraction of what major competitors charge for their technology, and our efficiency and output is greater."
"•The product is refined and separated fuels without the high cost of a distillation tower."
"•Our process is permitted to use its off-gas as fuel (8% of feedstock) therefore conversion costs are very low: 67kWh electricity for motors, and pumps, and approx. $7/hr for natural gas top up (if required)."
"•Significant labs have validated our technology: IsleChem (process), CRA (Stack Test), Intertek and Petrolabs (fuel testing), and a rigorous permit process with the NYSDEC (NY State)."
"John Bordynuik has designed further enhancements to the P2O processor, including two columns supporting 4 catalyst trays. In addition, he has added significant technology to guarantee fuel quality, along with installing an inline fuel additive injecting system on both heavy and light fuel condensing systems. He has also engineered a hot-tap residue removal process. Quality control includes two columns for control and specificity of fuel fractions, a cyclone (particulate removal in vapor), fuel filters (particulate removal in liquid), and a centrifuge (additional redundant particulate trap), as well as column enhancements to guarantee particulate free fuel. Fuel additives are injected inline while fuel is being produced to increase their effectiveness. The residue removal system now works while the processor is running, so the reactor does not have to be cooled down and stopped to remove residue."
http://plastic2oil.com/plastic2oil-business.aspx
http://plastic2oil.com/plastic2oil-business/process.aspx
There's some other things throughout the site I don't recall seeing before. A lot more details about the process. Poke around.
"JBI anticipates a rapid expansion of P2O sites using modular prefabrication techniques."
"The residue was tested and has a heating value of 10,600 BTU." <~~~and can be sold?
"The residue removal system works while the processor is producing fuel so the process does not have to be cooled down to remove residue."
"The process has significant redundant quality controls to ensure fuel quality."
"significant technology to guarantee fuel quality"
"Additives are injected while fuel is made to enhance effectiveness."
"JBI's system costs a small fraction of what major competitors charge for their technology, and our efficiency and output is greater."
"•The product is refined and separated fuels without the high cost of a distillation tower."
"•Our process is permitted to use its off-gas as fuel (8% of feedstock) therefore conversion costs are very low: 67kWh electricity for motors, and pumps, and approx. $7/hr for natural gas top up (if required)."
"•Significant labs have validated our technology: IsleChem (process), CRA (Stack Test), Intertek and Petrolabs (fuel testing), and a rigorous permit process with the NYSDEC (NY State)."
"John Bordynuik has designed further enhancements to the P2O processor, including two columns supporting 4 catalyst trays. In addition, he has added significant technology to guarantee fuel quality, along with installing an inline fuel additive injecting system on both heavy and light fuel condensing systems. He has also engineered a hot-tap residue removal process. Quality control includes two columns for control and specificity of fuel fractions, a cyclone (particulate removal in vapor), fuel filters (particulate removal in liquid), and a centrifuge (additional redundant particulate trap), as well as column enhancements to guarantee particulate free fuel. Fuel additives are injected inline while fuel is being produced to increase their effectiveness. The residue removal system now works while the processor is running, so the reactor does not have to be cooled down and stopped to remove residue."
http://plastic2oil.com/plastic2oil-business.aspx
http://plastic2oil.com/plastic2oil-business/process.aspx
There's some other things throughout the site I don't recall seeing before. A lot more details about the process. Poke around.
Raw
Research & analysis on some of my favorite stocks is located on the sticky note on the SwingTrade board.
http://investorshub.advfn.com/boards/board.aspx?board_id=1781
Join the InvestorsHub Community
Register for free to join our community of investors and share your ideas. You will also get access to streaming quotes, interactive charts, trades, portfolio, live options flow and more tools.
