Plastic2Oil Inc (PTOI)

[scion]

Air Pollution Control Permit Conditions

Schedule B - Order on Consent File No. 10-54

Procured feedstock shall be source separated recyclable polyolefins and polyethylenes. Prior to acceptance for processing all feed stocks will be qualified and inspected by plant staff.

Detailed Description of the Process for Procurement of the Plastic Feedstock

JBI will carefully review potential sources of recycle grade plastic for use as a raw material feedstock. This material will be acquired from the industrial market place. Plastic types which have been determined to be acceptable for utilization as feedstock include:

Polypropylene (PP), Low Density Polyethylene (LDPE), and High Density Polyethylene (HDPE). No Halogenated plastics such as Polyvinyl Chloride (PVC) will be accepted by JBI.

All sources of plastic feed will be prequalified by JBI personnel before agreeing to accept the material. This prequalification procedure will consist of visual inspection by JBI personnel, review of the MSDS for the material where available, and possible test results from material samples when testing is deemed necessary. Typical plastic materials which can be utilized as feedstocks include plastic parts and cuttings, packaging film, shopping bag film, strapping and mixed color regrind. These materials are typically produced by vacuum forming, injection molding, casting, or tooling.

Air Pollution Control Permit Conditions
Page 10
http://www.sec.gov/Archives/edgar/data/1381105/000121390010005243/f8k121510ex99i_jbi.htm