In case you aren't aware note that the size vessel(the handy class)CWRN will use til the dredging is complete(reported to be in Dec but could be early Jan)have their own loading systems-multiple cranes and I believe conveyor options-multiple reasons CWRN will use them til the bulk mineral terminal is dredged /upgraded w conveyors....
The port apparently presently has a 40 foot depth and is being dredged to 15 meters(49.5') according to previous reports.
From Wikipedia
Although there is no official definition in terms of exact tonnages, Handysize most usually refers to a dry bulk vessel (or, less commonly, to a product tanker) with deadweight of about 15,000–35,000 tons. Above this size are Handymax bulkers (typically 35,000 - 58,000 tons deadweight); there is no well-defined or widely accepted size sector below 15,000 tons.
Handysize is also sometimes used to refer to the span of up to 60,000 tons, with Handymax being a subclassification, rather than a larger category.[1]
Handysize is numerically the most common size of bulk carrier, with nearly 2000 units in service totalling about 43 million tons. Handysize ships are very flexible because their size allows them to enter smaller ports, and in most cases they are 'geared' - i.e. fitted with cranes - which means that they can load and discharge cargoes at ports which lack cranes or other cargo handling systems. Compared to larger bulk carriers, handysizes carry a wider variety of cargo types. These include steel products, grain, metal ores, phosphate, cement, logs, woodchips and other types of so-called 'break bulk cargo'.
.... The most common industry-standard specification handysize bulker is now about 32,000 metric tons of deadweight on a summer draft of about 10 metres (33 ft), and features 5 cargo holds with hydraulically operated hatch covers, with four 30 metric ton cranes for cargo handling....
