Plastic2Oil Inc (PTOI)

[Ranb2khz]

The "BIG PICTURE":




With this "BIG PICTURE" in mind, let's go back and review what you've learned thus far about the P2O portion of the synergy JBI:





http://www.plastic2oil.com/





The Plastic2Oil Advantage

* Unlike existing plastic-to-oil operations, JBI's process accepts raw unwashed, mixed plastics.

* The output from the laboratory processor was evaluated by an independent lab and passed ASTM testing.

* Minimal external energy required.

* Processor footprint requires less than 500 square feet (46 square meters).

* Approximately one litre of oil is extracted for every kilogram of plastic.

* Continuous feeding of plastic optimizes production output.

* The reusable catalyst is produced economically by JBI'S PAK-IT.


The Plastic2Oil Initiative





Plastic to Oil

A solution to the world's plastic recycling problem

The Company will commence operations with Plastic2Oil: our focus is on producing fuel from recyclable plastic products.

While mining through the research archive, John Bordynuik found the solution to a process involving breaking down plastic molecules. Bordynuik had explored this in the past but there was no research available at that time to solve the catalyst problem (the high energy to crack plastic). This research was conducted when plastic was in its infancy and oil prices were very low. It appears the research was conducted for non-commercial purposes and had no commercial value at the time. Our research has revealed that this process and catalyst is not presently used. By integrating this technology into a large batch processor we can accomplish the important facts listed to the right.

Important Facts

* Approximately one liter of oil is extracted from a kilogram of plastic.

* The gas emitted (a by-product) provides the energy necessary to fuel the process.

* Due to a catalyst (trade secret) and a highly optimized process, oil can be extracted in 4 hours from a large source of raw unwashed, mixed plastics.

* The process can be highly automated.





Rubber to Oil

A solution to one of the world's biggest enviromental problems.

Tires, an environmental nightmare the world over.

Millions of automotive tires are scrapped everyday, in all parts of the developed world. Almost all of these tires end up in landfill sites where they take many many years to decompose. Stacks of old tires also present potential health risks, scrap tire piles can become homes to pests and provide the perfect environment for mosquitoes to breed, they are a potential fire hazard, and they can contaminate surface water run-off.

Important Facts

* A standard car tire can produce about the same Btu's as around 9.5 litres of gasoline.

* The gas emitted (a by-product) provides the energy necessary to fuel the process.

* Due to a catalyst (trade secret) and a highly optimized process, oil can be extracted in 2 to 4 hours from a large source of tires.

* The steel found in tires, is separated by our process, and sold to metal recyclers.

* The carbon black that is a remnant of our process can be mixed with the tire oil and used as a fuel or used in asphalt production.

* The process can be highly automated.





John Bordynuik Inc., is the world's premier data recovery firm.

There are millions of legacy 7-track and 9-track data tapes in storage by organizations around the globe because they hold valuable information, but are not readable. Many times these tapes are not readable due to the environment they were stored in, or simply their age. Most companies are resistant to disposing of these tapes because they hold such important data relevant to the organization.

John Bordynuik of John Bordynuik Inc., has developed a hardware and software solution to this problem, and as a result is able to recover the data on these tapes. They are currently sole sourced by NASA, and MIT, to recover all their legacy tape data. Once these tapes are read, and the data is supplied to the customer and verified as good, the tapes are to be destroyed. This is where Plastic2Oil comes in. We will take these tapes and run them through our process turning them into oil.

Click on the link below for more information on the tape recovery process done by John Bordynuik, Inc.:

http://www.johnbordynuik.com

Important Facts

After the data on computer backup tapes have been recovered by John Bordynuik, Inc., they are then recycled into oil by our Plastic2Oil process.