Diamond A Energy (fka DAECE)

[photonwav]

OT z1 well comment....

due to the many emails we are recieving asking for facts on the z1..mainly from readers of the lycos msev board (waste of time)...

first remember we were the longest longs on msev always had the scoops and DD.
then they started delays and excuses etc...so unlike the others on that board we spent the money to GO to TEXAS and find out.
REMEMBER it was i who posted 2 weeks before the last msev 10q that the consultants and bernie and the fgd crew should SHOULD bring in the well BEFORE they take more shares or options...2 WEEKS before they filed i brought it to all attention i could see it coming...but NO they put hands in cookie jar AGAIN.


so where are you now if you still hold msev?...well if you were the many emailing for our updates below is what they were..I will post the linage of updates..no one else has permission..but you will clearly see...FACTS as always...

today we will CALL the tx rrc and see what production you must have to be a commercial well....

FACT..prs from msev etc were saying they would release the flow rates ASAP..the last pr..no flow rates and going to plan b...
WHICH btw we suggested months ago when you read our updates...no we have nothing to do with msev and wish now we never did..like most we took a bath also...but..unlike most we went to see for ourselves and shared our findings...
btw conpare these against the prs from the companies..the dates and you will clearly see we posted facts, verified them and let you draw your own conclusions....

past email updates on the z1....
Below is the Z-1 Well Update and links to our Free
video presentation.

This material is Copyright Protected by Diamond A Energy thus any unauthorized use, misuse or reproductions of this material will be fully prosecuted under the Law. This is not to be posted on any public Forum.


Here is the Link for the FREE video presentation of an Oil and Gas well Acidizing process
http://www.diamondaenergy.com/acidizing_a_well.htm

Here is the Link for the FREE video presentation of an Oil and Gas well Fracturing process:
http://www.diamondaenergy.com/videos.htm

9-14-2002 z1 well update:

Below is the link to photo's of the z1 well taken 9-13-2002
NOTICE the Haliburton flow meter shows the total gas flows since the pump
jack was installed 8-17-2002, that have flown through the meter.
They have said they are going for the oil in the Mississippi.
http://www.diamondaenergy.com/z-1_update_09-14-2002.htm



09/09/2002 z1 well update:

They have HAD a separator installed on the z1 since we posted the photo's on 08-17-2002.
When you view these photo's the separator is the large silver tank in the view taken 08/17/2002 and 09/01/2002.

The 09/01/2002 Photos showed the installation of the larger motor.

http://www.diamondaenergy.com/pics_seperator.htm


09/05/2002
As of 2:30 PM Central Time
The pumpjack was not running
at all.

9/01/2002 z1 well update:

The pump jack was not running today.
Here is the link to photo of the new engine they installed yesterday, last update:
9/01/2002 z1 well update.
http://www.diamondaenergy.com/new_z-1_pictures.htm


08/30/2002 Z-1 Well Update:
As of this AM there was a crew onsight installing a larger engine on the pump jack.

08/27/2002 z1 well update:
As of Yesterday Evening:

The pump jack is still slowly pumping.
It is our opinion the fracturing of the Mississippi has bought in?
Apparently Mike Myers feels the debris, water, etc., can be removed.
ONLY time can tell.
Jason, when we asked last week why not just go for the Primary (the Bend Conglomerate) , he replied the Operator wants the oil in the Mississippi.

There are no substantial flows to release at this time.
IN OUR OPINION one way or the other there will be delay.....
Either to hopefully correct the Mississippi and whatever is happening down there....or plan b.

08/17/2002 NEW Z-1 PICTURES TAKEN SATURDAY
http://www.diamondaenergy.com/new_z-1_pic.htm

8/17/2002 Z-1 well update

Today the pump jack was running.
There is a Haliburton Mc2 Flow Analyzer. (About a $3k unit)
The pump jack is a rebuilt Lufkin 160 grasshopper (reported earlier)
The Lufkin was running a 48-inch stroke on a cycle of approximately
7 strokes per minute.
Photos will be available later.


8/16/2002 Z-1 well update Pepto Bismal?
Thursday much to our surprise (S&T Well Service) with a pulling unit on site. There were hands with the unit and swabbing the well.

Remember fracturing the Mississippi in these parts is a rare and relatively new process (and maybe never want too). Time will tell,.
In hindsight it seems to us pull up the well and fracture the primary zone the Conglomerate Bend and get the Mississippi on the next well.....But, we are not Mike Myers.
The well was left open and naked Thursday night.

Today all is back in place, the pump jack reassembled and the well shut in.
We have not contacted Jason however he stands by the Monday/ Tuesday time schedule for flows. This by a third party that talked with him today.

Pepto Bismal......check
Grecian formula....check


Thank You
Diamond Energy Corporation.

This material is Copyright Protected by Diamond A Energy thus any unauthorized use, misuse or reproductions of this material will be fully prosecuted under the Law