InvestorsHub Logo
Followers 62
Posts 19919
Boards Moderated 0
Alias Born 02/19/2007

Re: None

Friday, 01/02/2009 6:28:24 PM

Friday, January 02, 2009 6:28:24 PM

Post# of 432
So they had to repair it?? Must of hit the extreme pressures again? Am I seeing this right. So you stack mud on top to stop a blow out. Am I right on that?

Blowout preventer
From Wikipedia, the free encyclopedia
(Redirected from Blow Out Preventer)
Jump to: navigation, search

Two sets of blowout preventors for a well being drilled in Northern ItalyA blowout preventer (BOP) is a large valve that encases an oil well at surface. During drilling or well interventions, the valve may be closed if overpressure from an oil reservoir causes formation fluids such as oil and natural gas to back up within the wellbore and threaten the rig. By closing this valve (usually operated remotely via hydraulic actuators), the drilling crew can prevent explosive pressure release, thus regaining control of the reservoir pressure. Once this is accomplished, often the drilling mud density within the hole can be increased until enough fluid pressure is being placed on the reservoir, and the BOP can be opened for drilling to resume. The invention and use of BOPs resulted in the end of oil gushers, which were dangerous and costly.


http://en.wikipedia.org/wiki/Blow_Out_Preventer

Live Your Dreams