Asia Electrical Power International Group (fka AEPW)

[Superbee383]

Intellectual Property


Patents


We carry one patent for our SRM 16-12/24 SF6 GIS Ring Main Unit. We obtained this patent from the National Intellectual Property Bureau in April 2000. The patent life is 10 years and expires April 2010.

The significance of carrying a patent on this product is that at the time, we expected to generate the majority of our revenues from this model and wanted protection from any loss of revenue from the pirating of this product by various sources and from sales in illegal markets. However, this product has continuously been pirated despite the patent.

We do not carry any patents for our other products because the cost of obtaining a patent outweighs the benefits as copyright infringement laws in PRC are relatively new and enforcement to our knowledge is rare.

Since PRC joined the World Trade Organization, the Trademark Law was amended in 2001 and Implementing Rules in late 2002, and amended its copyright law.

Enforcement of copyright infringement in PRC has also been addressed, including recent changes that stiffened penalties for patent, trademark or copyright infringement, and the use of preliminary injunctions, and added criminal liability as an available remedy to trademark infringement.

In light of these new amendments, we may apply for patents on the remainder of our products in 2007.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Yumpin yiminy.. these switches, etc., are Greek to me:

Principal Products, Services and Their Markets


We design, manufacture and market electrical power systems designed to monitor and control the flow of electrical energy and to provide protection to motors, transformers and other electrically powered equipment.

We carry a wide range of products which are generally configured together in various combinations to form a whole electric power and management system. The combinations vary depending on the needs of the customer and design specifications.

Our produce line is as follows:


Switchgears are use in combination with control, measurement, protection and command devices with which they are associated. Switchgears are commonly used in association with the electric power system, or grid, with the combination of electrical disconnects and/or circuit breakers used to isolate electrical equipment. Switchgear is used both to de-energize equipment to allow work to be done and to clear faults downstream.

- 5 -


--------------------------------------------------------------------------------

SRM 16-12/24 SF6 GIS Ring Main Unit


This product is used in conjunction with existing power systems to pass electrical current from one area to another; to allow for continuous flow of electricity. This product uses SF6 sulphurhexaflouride, a non-poisonous electronegative gas as insulation to protect the components. This product also has arc extinguishing properties through the use of circuit breakers. An arc is sparking which results when there are higher than normal levels of current and results in increased temperature in the unit. This occurs when the level of electricity used at one time exceeds a maximum level. The circuit breaker detects excessive power demands in a circuit and self-interrupts the arc when high levels of current occur. It is used primarily in connection with the generation, transmission, distribution and conversion of electric power.

This product consists of the AFL 12/24 D Load Break Switch, VDM6/12, VS1 12/24 and the BP1 Vacuum Circuit Breakers. This product is suitable for end-user or network node.

AGW 12/24 Outdoor Ring Main Unit


This product is the outdoor counterpart of the SRM 16-12/24 SF6 GIS Ring Main Unit with automatic temperature control. This product consists of the VS1-12/24, VDM6-12 and BP series vacuum circuit breakers and the AFL 12/24D Load break switch.

AGN 12/24 SF6 Ring Main Unit


This product is similar to the SRM 16-12/24 SF6 GIS Ring Main Unit however it consist of the VS1-12/24, VDM6-12 and BP series vacuum circuit breakers and the AFL 12/24D Load break switch.

KYN 12/24 Metal Clad Switchgear


This product is a complete set of distribution devices with 3.6 -2KV, 24KV used mainly in power plants, and mining industries.

Load Break Switches interrupts normal load currents in low voltage distribution networks.

EK24 GIS Load Break Switch


This product is an indoor high-voltage SF6 load switch and switchgear with a rated voltage of 12KV/24KV. It consists of SF6 gas as an arc-extinguishing property and insulation medium. This product includes three switch locations for on/off switching suitable for uses requiring controls at different locations. This product is adaptable with outdoor type cable cabinets.

AFL 12/24D Load Break Switch


This product is an indoor high-voltage SF6 load switch and switchgear with a rated voltage of 12KV. It consists of SF6 gas as an arc-extinguishing property and insulation medium. This product includes three switch locations for on/off switching suitable for uses requiring controls at different locations. This product is adaptable with outdoor type cable cabinets.

AFW 12/24 Overhead Load Break Switch


This product is an outdoor high-voltage SF6 load switch is the outdoor overhead type distribution equipment with the rated voltage of 12KV and the three-phase alternating current of 50Hz. It is mainly used to make and break rated current or regulate overload current on aerial circuit, which is suitable for systems such as electric network transformer substations and mining and industrial enterprises.

- 6 -


--------------------------------------------------------------------------------

AFLA 12/24D SF6 Load Break Switch


This product is an indoor high-voltage SF6 load switch and switchgear with a rated voltage of 12KV. It consists of SF6 gas as an arc-extinguishing property and insulation medium. This product includes three switch locations for on/off switching suitable for uses requiring controls at different locations. This product is adaptable with outdoor type cable cabinets however are mainly used indoors.

Circuit Breakers are electric device that, like a fuse, interrupts an electric current in a circuit when the current becomes too high.

VDM6/12 Vacuum


This product is an indoor high voltage vacuum circuit breaker with permanent magnetic mechanism with a rated voltage of 12KV and the three-phase alternating current of 50Hz and is used to switch on/off various types of electrical load. It is suitable for various types of electrical networks however used especially in industries requiring the generation of higher voltages and longer operating times.

VS1 12/24 Vacuum Circuit Breaker


This product is the outdoor counterpart of the VDM6/12 Vacuum.

AZW 12/24 Outdoor Circuit Breaker


This product is an indoor high voltage vacuum circuit breaker with permanent magnetic mechanism with a rated voltage of 12KV-24KV and the three-phase alternating current of 50Hz and is used to switch on/off various types of electrical load. It is suitable for various types of electrical networks however used especially in industries requiring the generation of higher voltages and longer operating times.

BP1/BP2 Vacuum Circuit Breaker


This product is not manufactured by the Company and is imported by suppliers in the Ukraine. It has a vacuum circuit breaker with permanent magnetic mechanism with a rated voltage of 10KV/12KV/24KV.