InvestorsHub Logo
Followers 35
Posts 3892
Boards Moderated 0
Alias Born 09/20/2012

Re: None

Tuesday, 03/17/2020 8:32:26 AM

Tuesday, March 17, 2020 8:32:26 AM

Post# of 931
I think we knew this was coming. Ouch.
LAKEWOOD, COLORADO, March 17, 2020 – General Moly, Inc. (General Moly or the “Company”) (NYSE American and TSX: GMO), the only western-exchange listed, pure-play molybdenum (“moly”) mineral development company, previously announced that on September 12, 2019, it received a deficiency letter (“Letter”) from the NYSE American stock exchange indicating that pursuant to Section 1003(f)(v) of the NYSE American Company Guide, the Company’s common stock has been selling for a low price per share for a substantial period of time. The Letter stated that the Company must demonstrate an improved share price improvement or effect a reverse stock split of its common stock by no later than March 12, 2020, in order to maintain the listing of the Company’s common stock on the NYSE American.
On March 12, 2020, the Company was advised by the NYSE American that the Company did not cure its price deficiency for both the absolute and average stock prices for the Company to exceed $0.20 by the end of the six-month period on March 12, 2020. The GMO stock price was trading then at $0.16 on an absolute and $0.20 on an average basis.
Given the recent downdraft of the financial markets with COVID-19 concerns as well as a weaker GMO stock price, the Company will seek shareholder approval at its next Annual Meeting of Stockholders in 2020 to affect a reverse stock split to raise its trading price and remedy the NYSE American listing deficiency. The Company has notified the NYSE American of the Company’s Board of Directors’ action to set a record date of April 27, 2020 and schedule the Company’s Annual Meeting of Stockholders in Lakewood, Colorado on June 19, 2020. The Company anticipates mailing its Proxy Statement, inclusive of a proposal to authorize the Board to consider a reverse stock split and Annual Report to stockholders in early May of 2020.
The NYSE American has granted the Company additional time until its 2020 Annual Meeting of Stockholders to implement a reverse stock split.
Chief Executive Officer Bruce D. Hansen commented, “These are challenging times for us all as global citizens in a pandemic. The moly price has weakened in recent days to below $10 per pound but is still above $9 per pound, while our stock price, which was over 20 cents largely through February, has also declined.”
In the interim, the Company's common stock remains listed on the NYSE American, under the trading symbol “GMO”, subject to the Company’s compliance with other continued listing requirements and subject to the trading price remaining above a required $0.06 minimum per share. The NYSE American has added the designation of “.BC” to indicate that the Company is below compliance with the listing standards set forth in the Company Guide. The NYSE American notification of continued listing deficiency does not affect the Company’s business operations or its reporting obligations under the Securities and Exchange Commission regulations. If the Company is unable to regain compliance, or if the stockholders fail to approve the proposed reverse stock split, the NYSE American has indicated it will initiate procedures to suspend and delist the Company’s common stock. Should that occur, the Company will consider alternative listing options.
About General Moly
General Moly is a U.S.-based, molybdenum mineral exploration and development company listed on the NYSE American, recently known as the NYSE MKT and former American Stock Exchange, and the Toronto Stock Exchange under the symbol GMO. The Company’s primary asset, an 80% interest in the Mt. Hope Project located in central Nevada, is considered one of the world’s largest and highest grade molybdenum deposits. Combined with the Company’s wholly-owned Liberty Project, a molybdenum and copper property also located in central Nevada, General Moly’s goal is to become the largest primary molybdenum producer in the world.
Molybdenum is a metallic element used primarily as an alloy agent in steel manufacturing. When added to steel, molybdenum enhances steel strength, resistance to corrosion and extreme temperature performance. In the chemical and petrochemical industries, molybdenum is used in catalysts, especially for cleaner burning fuels by removing sulfur from liquid fuels, and in corrosion inhibitors, high performance lubricants and polymers.
Contact:
Scott Roswell
(303) 928-8591
info@generalmoly.com
Website: www.generalmoly.com
Join InvestorsHub

Join the InvestorsHub Community

Register for free to join our community of investors and share your ideas. You will also get access to streaming quotes, interactive charts, trades, portfolio, live options flow and more tools.