QS Energy Inc (QSEP)

[mr_sano]

The fun never stops at the QSEP fantasy factory!

“Dr. Christopher Gallagher explained, “At full commercial scale, our AOT device operates as a complex and dynamic system. Over the past few months, we have advanced our understanding of the oil flow and electric field interactions of this system both in the lab and in the field. As expected, AOT demonstration operations and testing with the repaired power supply were limited due largely to the combined effects of crude oil conductivity and operating limits of the installed power supply. Though limited, results of these in-field tests were consistent with recent laboratory tests performed both at our Tomball facility and at Temple University. Based on testing to date, we continue to move forward confident in our plans to reconfigure the AOT and re-start AOT demonstration operations before the end of the year. In the meantime, we will continue testing to further improve our understanding of this complex system.”

Wait…” over the past few months” QSEP has “advance our understanding of oil flow and EF interactions”…WTF have they been doing for greater part of the decade other than burning cash and converting it into paper! Another absurd paid for “EXPERT” view. Company is so pathetic it has to resort to this type of contracted damage control. The explanation doesn’t even hold up!

“As expected, AOT demonstration operations and testing with the repaired power supply were limited due largely to the combined effects of crude oil conductivity and operating limits of the installed power supply”

So now its not JUST the power supply it’s the combined effects of conductivity AND limits of the PS! Wow, how about the fact that the flow is turbulent and is comprised of a batched viscous flammable feedstock that is pumped through electrified grid packs situated within the pipe which adds another 1000 variables to the equation! Bernoulli's head is spinning!

As for the power supply excuse ….it’s been stated by Tao and the company that AOT needs only to generate a 1.6kV High Voltage low (nanoamps)amp field. Below are the specs for just one series of Glassman Power supplies products. These are off the shelf ready to buy. They range from 1kV to 150kV with current ranging from 3.0 Amps to .25 milliamps. Both are adjustable to 0 from the maximum rated spec. So maybe all these QSEP engineers can explain why all these power supplies options would only provide "limited" performance. Jeez, this has to be the story of this company's life. Limited performance…and its all bad!

https://www.xppower.com/Portals/0/pdfs/SF_LH.pdf