Followers | 15 |
Posts | 6788 |
Boards Moderated | 1 |
Alias Born | 06/06/2007 |
![](http://investorshub.advfn.com/images/default_ih_profile2_4848.jpg?cb=0)
Tuesday, November 28, 2017 8:21:29 AM
BGMZF BGM.v BGM Intersects 14.69 G/T Au Over 28.50 Metres at Shaft Zone
by @newswire on November 28, 2017
NEW DEPTH EXTENSION ALSO YIELDS 13.48 G/T OVER 16.60 METRES
TORONTO, Nov. 28, 2017 /CNW/ - Barkerville Gold Mines Ltd. (TSXV: BGM) (the "Company" or "Barkerville") is pleased to announce additional drilling results from the ongoing 160,000 metre Phase II Island Mountain exploration and infill drilling program at the Company's flagship Cariboo Gold Project. The Company is currently exploring and delineating the Valley and Shaft Zones with nine drill rigs. Detailed drilling results, a drill hole location plan map and vertical sections are presented at the end of this release. The exact geometry and hence true width of the mineralized zones cannot be assuredly concluded at this time therefore core lengths are reported.
Drillhole Location Map (CNW Group/Barkerville Gold Mines Ltd.)
Significant Gold Zones Intersected at Shaft Zone
The Company is very pleased to report that a potentially new mineralized corridor has been discovered at depth on Island Mountain. Phase II drillhole IM-17-191 intersected three separate vein systems grading 19.16 g/t Au over 9.70 metres, 13.48 g/t Au over 16.60 metres and 14.69 g/t Au over 28.50 metres at vertical depths ranging from 485 to 540 metres below surface. Due to the scarcity of drilling in this area, it is unclear whether the new mineralization correlates as a depth extension to the interpreted Gamma Corridor or represents a previously unidentified new corridor. A Gamma Corridor section with widened viewing envelope is presented at the end of this release for reference.
Previously disclosed Phase II drillhole IM-17-145 is located 50 metres southwest of the new intersections having graded 17.34 g/t Au over 7.05 metres. Situated 150 metres to the northeast, drillhole CM-17-018 intersected similar veining grading 8.16 g/t Au over 4.00 metres near the end of the hole and may not have been drilled far enough to test the new mineralization. No other drilling occurs down dip or down plunge of the IM-17-191 intersections and as such are open for immediate expansion.
Chris Lodder, President and CEO commented, "The Island Mountain infill drilling continues to expand the Shaft Zone vein corridors in all directions and with several new intersections awaiting results. In January 2018, we will mobilize two rigs to begin initial drill testing of regional targets, while the remaining rigs will continue to focus on Cow and Island Mountain".
Shaft Zone - Corridors Discussion
The sandstone hosted veining which constitutes the newly named Alpha, Beta and Gamma Corridors of the Shaft Zone are manifested as an anastomosing network of high vein density with an overall sub-vertical dip and northeast strike. Based upon drilling results to date, estimated horizontal widths of the corridors are variable and range from 5 to 35 metres. These corridors, as well as others that are developing in the Shaft and Valley Zones have been defined from surface to a vertical depth of 600 metres and remain open for expansion to depth and down plunge. Drillhole spacing in the corridors currently averages 25 metres between drilling sections with vertical drilling separations ranging from 20 to 75 metres with hole spacing increasing to depth. Gold grades are intimately associated with vein-hosted pyrite as well as pyritic, intensely silicified wall rock haloes in close proximity to the veins.
Qualified Persons
Exploration activities at the Cariboo Gold Project are administered on site by the Company's Exploration Manager, Maggie Layman, P.Geo. As per National Instrument 43-101 Standards of Disclosure for Mineral Projects, Paul Geddes, P.Geo. Vice President Exploration, is the Qualified Person for the Company and has prepared, validated and approved the technical and scientific content of this news release. The Company strictly adheres to CIM Best Practices Guidelines in conducting, documenting, and reporting its exploration activities on the Cariboo Gold Project.
Quality Assurance – Quality Control
Once received from the drill and processed, all drill core samples are sawn in half, labelled and bagged. The remaining drill core is subsequently stored on site at the Company's secure facility in Wells, BC. Numbered security tags are applied to lab shipments for chain of custody requirements. The Company inserts quality control (QC) samples at regular intervals in the sample stream, including blanks and reference materials with all sample shipments to monitor laboratory performance. The QAQC program was designed and approved by Lynda Bloom, P.Geo. of Analytical Solutions Ltd., and is overseen by the Company's Qualified Person, Paul Geddes, P.Geo, Vice President Exploration.
Drill core samples are submitted to ALS Geochemistry's analytical facility in North Vancouver, British Columbia for preparation and analysis. The ALS facility is accredited to the ISO/IEC 17025 standard for gold assays and all analytical methods include quality control materials at set frequencies with established data acceptance criteria. The entire sample is crushed and 250 grams is pulverized. Analysis for gold is by 50g fire assay fusion with atomic absorption (AAS) finish with a lower limit of 0.01 ppm and upper limit of 100 ppm. Samples with gold assays greater than 100 ppm are re-analyzed using a 1,000g screen metallic fire assay. A selected number of samples are also analyzed using a 48 multi-elemental geochemical package by a 4-acid digestion, followed by Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES) and Inductively Coupled Plasma Mass Spectroscopy (ICP-MS).
About Barkerville Gold Mines Ltd.
The Company is focused on developing its extensive land package located in the historical Cariboo Mining District of central British Columbia. Barkerville's mineral tenures cover 2,110 square kilometres along a strike length of 67 kilometres which includes several past producing hard rock mines of the historic Barkerville Gold Mining Camp near the town of Wells, British Columbia. The QR Project, located approximately 110 kilometres by highway and all weather road from Wells was acquired by Barkerville in 2010 and boasts a fully permitted 900 tonne/day gold milling and tailings facility. Test mining of the Bonanza Ledge open pit was completed in March of 2015 with 91,489 tonnes of material milled producing 25,464 ounces of gold. The Company has completed several drilling and exploration programs over the past 20 years and has compiled this data with all historical information in order develop geologic models which are assisting management in defining new deposits in the Cariboo Gold Project. An extensive drill program is currently underway with the goal of delineating additional high grade gold mineralization.
Cautionary Statement on Forward-Looking Information
Neither the TSX Venture Exchange ('TSXV') nor its Regulation Services Provider (as that term is defined in the policies of the TSXV) accepts responsibility for the adequacy or accuracy of this release. No stock exchange, securities commission or other regulatory authority has approved or disapproved the information contained herein. This news release contains forward-looking information which is not comprised of historical facts. Forward-looking information involves risks, uncertainties and other factors that could cause actual events, results, performance, prospects and opportunities to differ materially from those expressed or implied by such forward-looking information. Forward looking information in this news release includes, but is not limited to, the Company's objectives, goals or future plans, statements regarding exploration results and exploration plans. Factors that could cause actual results to differ materially from such forward-looking information include, but are not limited to, capital and operating costs varying significantly from estimates, the preliminary nature of metallurgical test results, delays in obtaining or failures to obtain required governmental, environmental or other project approvals, uncertainties relating to the availability and costs of financing needed in the future, changes in equity markets, inflation, fluctuations in commodity prices, delays in the development of projects and the other risks involved in the mineral exploration and development industry, and those risks set out in the Company's public documents filed on SEDAR. Although the Company believes that the assumptions and factors used in preparing the forward-looking information in this news release are reasonable, undue reliance should not be placed on such information, which only applies as of the date of this news release, and no assurance can be given that such events will occur in the disclosed time frames or at all. The Company disclaims any intention or obligation to update or revise any forward-looking information, whether as a result of new information, future events or otherwise, other than as required by law.
Table 1: Length weighted gold composites for Shaft Zone Phase II drillholes:
HOLE-ID
FROM (M)
TO (M)
CORE LENGTH (M)
AU (G/T)
IM-17-190
ASSAYS PENDING
IM-17-191
194.45
196.25
1.80
7.10
INCLUDING
195.10
195.75
0.65
12.05
IM-17-191
344.50
345.10
0.60
153.00
IM-17-191
389.75
390.30
0.55
15.60
IM-17-191
419.00
422.00
3.00
8.03
INCLUDING
420.60
421.10
0.50
29.90
AND
421.10
422.00
0.90
7.73
IM-17-191
433.85
434.30
0.45
6.59
IM-17-191
478.45
479.05
0.60
10.00
IM-17-191
491.00
491.50
0.50
44.90
IM-17-191
553.00
553.65
0.65
12.70
IM-17-191
569.55
570.05
0.50
36.40
IM-17-191
571.85
572.50
0.65
14.30
IM-17-191
580.35
583.70
3.35
6.47
INCLUDING
580.35
581.10
0.75
10.90
AND
583.15
583.70
0.55
14.65
IM-17-191
588.00
597.70
9.70
19.16
INCLUDING
588.70
589.90
1.20
13.90
AND
589.90
590.75
0.85
14.65
AND
594.10
594.80
0.70
208.00
IM-17-191
606.35
622.95
16.60
13.48
INCLUDING
606.35
607.05
0.70
44.00
AND
610.15
611.10
0.95
21.30
AND
614.70
615.30
0.60
18.15
AND
617.40
617.95
0.55
19.80
AND
618.55
619.10
0.55
39.40
AND
619.10
619.60
0.50
11.55
AND
620.90
622.10
1.20
32.20
AND
622.10
622.95
0.85
72.80
IM-17-191
647.00
675.50
28.50
14.69
INCLUDING
647.00
647.50
0.50
19.75
AND
649.00
649.55
0.55
11.65
AND
653.80
654.30
0.50
16.25
AND
654.85
655.35
0.50
19.10
AND
657.90
658.50
0.60
20.40
AND
658.50
659.20
0.70
20.20
AND
659.20
660.15
0.95
26.40
AND
660.15
660.65
0.50
36.70
AND
662.90
663.95
1.05
15.75
AND
665.55
666.15
0.60
30.40
AND
666.15
666.85
0.70
42.20
AND
666.85
667.35
0.50
22.10
AND
668.40
669.35
0.95
22.40
AND
669.35
669.85
0.50
15.55
AND
671.00
671.55
0.55
34.20
AND
671.55
672.30
0.75
16.20
AND
672.30
673.40
1.10
44.60
AND
673.40
674.40
1.00
97.60
AND
675.00
675.50
0.50
14.25
IM-17-192
ASSAYS PENDING
IM-17-193
ASSAYS PENDING
IM-17-194
168.00
174.40
6.40
6.02
INCLUDING
168.00
169.50
1.50
10.30
AND
171.15
172.00
0.85
9.13
IM-17-194
444.60
445.15
0.55
7.18
IM-17-194
510.50
511.90
1.40
56.90
INCLUDING
510.50
511.25
0.75
88.10
AND
511.25
511.90
0.65
20.90
IM-17-194
656.65
657.65
1.00
7.98
IM-17-194
659.65
660.65
1.00
18.85
True widths cannot be accurately determined from the information available therefore core lengths are reported. Intervals
not recovered by drilling were assigned zero grade. Top cuts have not been applied to high grade assays.
Table 2: Drillhole Collar Orientations:
HOLE-ID
AZIMUTH
DIP
IM-17-191
130.00
-65.00
IM-17-194
136.10
-48.70
Gamma Corridor Longitudinal Section Shaft Zone (CNW Group/Barkerville Gold Mines Ltd.)
Island Mountain Vertical Section Shaft Zone (CNW Group/Barkerville Gold Mines Ltd.)
Barkerville Gold Mines logo (CNW Group/Barkerville Gold Mines Ltd.)
SOURCE Barkerville Gold Mines Ltd.
View original content with multimedia: http://www.newswire.ca/en/releases/archive/November2017/28/c4485.html
by @newswire on November 28, 2017
NEW DEPTH EXTENSION ALSO YIELDS 13.48 G/T OVER 16.60 METRES
TORONTO, Nov. 28, 2017 /CNW/ - Barkerville Gold Mines Ltd. (TSXV: BGM) (the "Company" or "Barkerville") is pleased to announce additional drilling results from the ongoing 160,000 metre Phase II Island Mountain exploration and infill drilling program at the Company's flagship Cariboo Gold Project. The Company is currently exploring and delineating the Valley and Shaft Zones with nine drill rigs. Detailed drilling results, a drill hole location plan map and vertical sections are presented at the end of this release. The exact geometry and hence true width of the mineralized zones cannot be assuredly concluded at this time therefore core lengths are reported.
Drillhole Location Map (CNW Group/Barkerville Gold Mines Ltd.)
Significant Gold Zones Intersected at Shaft Zone
The Company is very pleased to report that a potentially new mineralized corridor has been discovered at depth on Island Mountain. Phase II drillhole IM-17-191 intersected three separate vein systems grading 19.16 g/t Au over 9.70 metres, 13.48 g/t Au over 16.60 metres and 14.69 g/t Au over 28.50 metres at vertical depths ranging from 485 to 540 metres below surface. Due to the scarcity of drilling in this area, it is unclear whether the new mineralization correlates as a depth extension to the interpreted Gamma Corridor or represents a previously unidentified new corridor. A Gamma Corridor section with widened viewing envelope is presented at the end of this release for reference.
Previously disclosed Phase II drillhole IM-17-145 is located 50 metres southwest of the new intersections having graded 17.34 g/t Au over 7.05 metres. Situated 150 metres to the northeast, drillhole CM-17-018 intersected similar veining grading 8.16 g/t Au over 4.00 metres near the end of the hole and may not have been drilled far enough to test the new mineralization. No other drilling occurs down dip or down plunge of the IM-17-191 intersections and as such are open for immediate expansion.
Chris Lodder, President and CEO commented, "The Island Mountain infill drilling continues to expand the Shaft Zone vein corridors in all directions and with several new intersections awaiting results. In January 2018, we will mobilize two rigs to begin initial drill testing of regional targets, while the remaining rigs will continue to focus on Cow and Island Mountain".
Shaft Zone - Corridors Discussion
The sandstone hosted veining which constitutes the newly named Alpha, Beta and Gamma Corridors of the Shaft Zone are manifested as an anastomosing network of high vein density with an overall sub-vertical dip and northeast strike. Based upon drilling results to date, estimated horizontal widths of the corridors are variable and range from 5 to 35 metres. These corridors, as well as others that are developing in the Shaft and Valley Zones have been defined from surface to a vertical depth of 600 metres and remain open for expansion to depth and down plunge. Drillhole spacing in the corridors currently averages 25 metres between drilling sections with vertical drilling separations ranging from 20 to 75 metres with hole spacing increasing to depth. Gold grades are intimately associated with vein-hosted pyrite as well as pyritic, intensely silicified wall rock haloes in close proximity to the veins.
Qualified Persons
Exploration activities at the Cariboo Gold Project are administered on site by the Company's Exploration Manager, Maggie Layman, P.Geo. As per National Instrument 43-101 Standards of Disclosure for Mineral Projects, Paul Geddes, P.Geo. Vice President Exploration, is the Qualified Person for the Company and has prepared, validated and approved the technical and scientific content of this news release. The Company strictly adheres to CIM Best Practices Guidelines in conducting, documenting, and reporting its exploration activities on the Cariboo Gold Project.
Quality Assurance – Quality Control
Once received from the drill and processed, all drill core samples are sawn in half, labelled and bagged. The remaining drill core is subsequently stored on site at the Company's secure facility in Wells, BC. Numbered security tags are applied to lab shipments for chain of custody requirements. The Company inserts quality control (QC) samples at regular intervals in the sample stream, including blanks and reference materials with all sample shipments to monitor laboratory performance. The QAQC program was designed and approved by Lynda Bloom, P.Geo. of Analytical Solutions Ltd., and is overseen by the Company's Qualified Person, Paul Geddes, P.Geo, Vice President Exploration.
Drill core samples are submitted to ALS Geochemistry's analytical facility in North Vancouver, British Columbia for preparation and analysis. The ALS facility is accredited to the ISO/IEC 17025 standard for gold assays and all analytical methods include quality control materials at set frequencies with established data acceptance criteria. The entire sample is crushed and 250 grams is pulverized. Analysis for gold is by 50g fire assay fusion with atomic absorption (AAS) finish with a lower limit of 0.01 ppm and upper limit of 100 ppm. Samples with gold assays greater than 100 ppm are re-analyzed using a 1,000g screen metallic fire assay. A selected number of samples are also analyzed using a 48 multi-elemental geochemical package by a 4-acid digestion, followed by Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES) and Inductively Coupled Plasma Mass Spectroscopy (ICP-MS).
About Barkerville Gold Mines Ltd.
The Company is focused on developing its extensive land package located in the historical Cariboo Mining District of central British Columbia. Barkerville's mineral tenures cover 2,110 square kilometres along a strike length of 67 kilometres which includes several past producing hard rock mines of the historic Barkerville Gold Mining Camp near the town of Wells, British Columbia. The QR Project, located approximately 110 kilometres by highway and all weather road from Wells was acquired by Barkerville in 2010 and boasts a fully permitted 900 tonne/day gold milling and tailings facility. Test mining of the Bonanza Ledge open pit was completed in March of 2015 with 91,489 tonnes of material milled producing 25,464 ounces of gold. The Company has completed several drilling and exploration programs over the past 20 years and has compiled this data with all historical information in order develop geologic models which are assisting management in defining new deposits in the Cariboo Gold Project. An extensive drill program is currently underway with the goal of delineating additional high grade gold mineralization.
Cautionary Statement on Forward-Looking Information
Neither the TSX Venture Exchange ('TSXV') nor its Regulation Services Provider (as that term is defined in the policies of the TSXV) accepts responsibility for the adequacy or accuracy of this release. No stock exchange, securities commission or other regulatory authority has approved or disapproved the information contained herein. This news release contains forward-looking information which is not comprised of historical facts. Forward-looking information involves risks, uncertainties and other factors that could cause actual events, results, performance, prospects and opportunities to differ materially from those expressed or implied by such forward-looking information. Forward looking information in this news release includes, but is not limited to, the Company's objectives, goals or future plans, statements regarding exploration results and exploration plans. Factors that could cause actual results to differ materially from such forward-looking information include, but are not limited to, capital and operating costs varying significantly from estimates, the preliminary nature of metallurgical test results, delays in obtaining or failures to obtain required governmental, environmental or other project approvals, uncertainties relating to the availability and costs of financing needed in the future, changes in equity markets, inflation, fluctuations in commodity prices, delays in the development of projects and the other risks involved in the mineral exploration and development industry, and those risks set out in the Company's public documents filed on SEDAR. Although the Company believes that the assumptions and factors used in preparing the forward-looking information in this news release are reasonable, undue reliance should not be placed on such information, which only applies as of the date of this news release, and no assurance can be given that such events will occur in the disclosed time frames or at all. The Company disclaims any intention or obligation to update or revise any forward-looking information, whether as a result of new information, future events or otherwise, other than as required by law.
Table 1: Length weighted gold composites for Shaft Zone Phase II drillholes:
HOLE-ID
FROM (M)
TO (M)
CORE LENGTH (M)
AU (G/T)
IM-17-190
ASSAYS PENDING
IM-17-191
194.45
196.25
1.80
7.10
INCLUDING
195.10
195.75
0.65
12.05
IM-17-191
344.50
345.10
0.60
153.00
IM-17-191
389.75
390.30
0.55
15.60
IM-17-191
419.00
422.00
3.00
8.03
INCLUDING
420.60
421.10
0.50
29.90
AND
421.10
422.00
0.90
7.73
IM-17-191
433.85
434.30
0.45
6.59
IM-17-191
478.45
479.05
0.60
10.00
IM-17-191
491.00
491.50
0.50
44.90
IM-17-191
553.00
553.65
0.65
12.70
IM-17-191
569.55
570.05
0.50
36.40
IM-17-191
571.85
572.50
0.65
14.30
IM-17-191
580.35
583.70
3.35
6.47
INCLUDING
580.35
581.10
0.75
10.90
AND
583.15
583.70
0.55
14.65
IM-17-191
588.00
597.70
9.70
19.16
INCLUDING
588.70
589.90
1.20
13.90
AND
589.90
590.75
0.85
14.65
AND
594.10
594.80
0.70
208.00
IM-17-191
606.35
622.95
16.60
13.48
INCLUDING
606.35
607.05
0.70
44.00
AND
610.15
611.10
0.95
21.30
AND
614.70
615.30
0.60
18.15
AND
617.40
617.95
0.55
19.80
AND
618.55
619.10
0.55
39.40
AND
619.10
619.60
0.50
11.55
AND
620.90
622.10
1.20
32.20
AND
622.10
622.95
0.85
72.80
IM-17-191
647.00
675.50
28.50
14.69
INCLUDING
647.00
647.50
0.50
19.75
AND
649.00
649.55
0.55
11.65
AND
653.80
654.30
0.50
16.25
AND
654.85
655.35
0.50
19.10
AND
657.90
658.50
0.60
20.40
AND
658.50
659.20
0.70
20.20
AND
659.20
660.15
0.95
26.40
AND
660.15
660.65
0.50
36.70
AND
662.90
663.95
1.05
15.75
AND
665.55
666.15
0.60
30.40
AND
666.15
666.85
0.70
42.20
AND
666.85
667.35
0.50
22.10
AND
668.40
669.35
0.95
22.40
AND
669.35
669.85
0.50
15.55
AND
671.00
671.55
0.55
34.20
AND
671.55
672.30
0.75
16.20
AND
672.30
673.40
1.10
44.60
AND
673.40
674.40
1.00
97.60
AND
675.00
675.50
0.50
14.25
IM-17-192
ASSAYS PENDING
IM-17-193
ASSAYS PENDING
IM-17-194
168.00
174.40
6.40
6.02
INCLUDING
168.00
169.50
1.50
10.30
AND
171.15
172.00
0.85
9.13
IM-17-194
444.60
445.15
0.55
7.18
IM-17-194
510.50
511.90
1.40
56.90
INCLUDING
510.50
511.25
0.75
88.10
AND
511.25
511.90
0.65
20.90
IM-17-194
656.65
657.65
1.00
7.98
IM-17-194
659.65
660.65
1.00
18.85
True widths cannot be accurately determined from the information available therefore core lengths are reported. Intervals
not recovered by drilling were assigned zero grade. Top cuts have not been applied to high grade assays.
Table 2: Drillhole Collar Orientations:
HOLE-ID
AZIMUTH
DIP
IM-17-191
130.00
-65.00
IM-17-194
136.10
-48.70
Gamma Corridor Longitudinal Section Shaft Zone (CNW Group/Barkerville Gold Mines Ltd.)
Island Mountain Vertical Section Shaft Zone (CNW Group/Barkerville Gold Mines Ltd.)
Barkerville Gold Mines logo (CNW Group/Barkerville Gold Mines Ltd.)
SOURCE Barkerville Gold Mines Ltd.
View original content with multimedia: http://www.newswire.ca/en/releases/archive/November2017/28/c4485.html
Join the InvestorsHub Community
Register for free to join our community of investors and share your ideas. You will also get access to streaming quotes, interactive charts, trades, portfolio, live options flow and more tools.