Applied DNA Sciences Inc (APDN)

[mcsharkey]

Yeah Parkmart, on your concern I feel it important to know who paid for the development and testing of the black ink used in the Videojet 1860: [/quote]. You did acknowledge the US Department of Defense.

Just for shits and grins. I carry this data around in my back pocket, willing to drop it down like a dime into the collection plate, CAUSE I BELIEVE. Operational parameters our joy juice remains legible in (for post op forensics and data collection in crashes, and shoot downs and shoot ups all over.

why not use something that's edible and capable of retaining readibility after crashing to Earth like a meteor:[/quote]SigNature DNA Tested on metal, ceramic and epoxy surfaces, and exceeded the limits of the following conditions

•Thermal Cycle* –MIL-STD-883 TM 1010: 100 cycles, -65oC to +150oC (satellite orbit)
•Thermal Shock* – MIL-STD-883 TM 1011: -65oC to +125oC; 15 cycles
•Unbiased HAST* –JESD22-A118, 130oC/85% RH; 100 hours
•Cyclic Moisture Resistance* –MIL-STD-883 TM 1004 (+25oC - 65oC, -10oC); 100 cycles
•Resistance to Solvents –MIL-STD-883 TM 2015
*Conducted by Silicon Cert Laboratories without applied voltage.
•Simulated wave solder immerse in solder*; JESD22-B102E, Sn96.5Ag3.0Cu0.5, at 245o C for 5 seconds
•Simulated solder reflow solder*; JESD22-B102E reflow at 260oC
•Ten X-ray exposures*; MIL-STD-883 TM 2012 Radiography
•Salt Atmosphere*; MIL-STD-883 TM 1009 Condition D, 35o C, 240 hours
•Resistance of Insulating Surfaces**ASTM D-257 07 Sample exceeded the measuring capability of the Megaohmeter. Surface Resistivity (./square) is greater than 5.24E+15; SigNature DNA is non-conductive

*Conducted by Silicon Cert Laboratories without applied voltage.
**Conducted by Intertek
SigNature DNA Tested on metal, ceramic and epoxy surfaces •Outgas Testing***; ASTM E 595, Vacuum < 5x10-5 torr – 24hrs @125oC, DNA falls 30-80% below the rejection criteria
•Non nutrient for fungus****; MIL-STD-810G METHOD 508.6: Resistance to Fungus Test; all SigNature® DNA-embedded inks are NEGATIVE in 28 day test
•Ionizing radiation*****; MIL-STD-883 METHOD 1019.7: DNA survives RHA level H; radiation total dose 106
***Conducted by Pacific Testing Laboratories
****Conducted by APDN Laboratories
*****Conducted by Aeroflex-rad

SigNature DNA Tested on metal, ceramic and epoxy surfaces

applied.log.notag.jpg