Hemp Inc (HEMP)

[Det_Robert_Thorne]

I am talking about decorticator room

There is duct work you can see it in the back when he's walking in. Those are the wires that are going to be run in the pipes so they are not exposed.

It has changed dramatically. Get real lol It was dump now everything is clean, put together and about to be up and running.

That's a really SMART decision to buy in a bankruptcy action. Get it for ten cents on the dollar.

I don't know what ductwork you're talking about, but I'm talking about the decorticator equipment that he pans to, starting at about the 45 second mark in the video:

https://www.facebook.com/KingOfPot/videos/10210360742551375/

The first thing we see as he shows the ceiling isn't ductwork, but one of the steel columns and beams that support the ceiling:



Then, when he finally does show the decorticator, we see little change between Oct 5, when he posted a photo of his dogs under the same equipment, and Dec 20, more than two months later. Note in the following photo that:

1) What looks like it could be ductwork is actually wiring trays that were installed one year ago (IIRC)

2) There are still no ducts connected at the obvious connection points on the equipment

3) The wire coils on the floor and hanging from the equipment haven't been moved.



As to buying equipment at a bankruptcy auction, since it wasn't running at the time, there was no way to know if breakdowns and inability to get replacement parts for the ten-year-old, one-off equipment were the reason that Kenactiv Innovations went bankrupt.

Last year at this time, Perlowin was talking about getting the decorticator running by the end of 2Q/16, yet in February, 2016, he stopped talking about it, and then switched his focus to the mill.

Why do you think that is?

Finally, read this post of mine from Feb 18, 2016, which highlights a Yahoo Message Board post where the writer claims that a case of mistaken identity confirmed the rumor that there was a problem with a broken crankshaft that would take months to remanufacture:

http://investorshub.advfn.com/boards/read_msg.aspx?message_id=120618716&txt2find=broken|crank