Plastic2Oil Inc (PTOI)

[MorningLightMountain]

However, when the normal plastic (polyethylene, polypropylene or poly olefins) was co-fed, it was
determined that this ratio of oil to plastic was insufficient to wet out the plastic due to the large surface area
of the plastic.

Consequently the ratio of oil to plastic had to be increased to 0.2 gallons of oil/lb of plastic to properly wet
out the plastic.

that never ceases to amaze me, 0.2 gallons of oil typically weighs more than the one pound of plastic.......

by mass, it truly is more of an oil to oil process than "normal" plastic to oil.....