Register for free to join our community of investors and share your ideas. You will also get access to streaming quotes, interactive charts, trades, portfolio, live options flow and more tools.
Register for free to join our community of investors and share your ideas. You will also get access to streaming quotes, interactive charts, trades, portfolio, live options flow and more tools.
Guess I'm the only one that knows about this Gem!!! Wowza!
Same here, this one has gone south fast! :-/
Amen. ?? sure hope they have some amazingly spectacular news in the near future. Let's get going green please!
On my iPhone app, saw Macy's, Burlington, and Pillsbury... BIG money!
Fully agreed, planning to finish my accumulation Monday, before blast off. Could be in penny land with great 10k Imo. Gltu!!
Been following this board awhile and this is one of the first truly intelligent and reasonable posts I've read so far. Thank you for posting and I fully agree!
Gltu!
I agree. I know the article says m270 but the M290 will more than likely be what they order.
Received complete transcript of today's conference from SeekingAlpha:
http://m.seekingalpha.com/article/2731525-sigma-labs-sglb-ceo-mark-cola-on-q3-2014-results-earnings-call-transcript?source=email_rt_article_readmore&uprof=45&dr=1
Looks great to me! Thanks for crunching the numbers!
Great webinar today...looks like we can expect a GREAT Q4 earnings report.
Regarding the upcoming conference Mr. Cola mentioned, looks like there are two and they are invitation only.
Project Title: Consortium for Additive Manufacturing Materials
Lead: Pennsylvania State University
Award Number: 70NANB14H058
Posting Date: September 29, 2014
Planned public meetings/workshops for strategic road
mapping (as of 9/15/14):
January 28-30, 2015
Penn Stater Conference Center, University Park, PA. This is a
preliminary strategic planning and roadmapping meeting. Attendance will be by invitation only.
April 22-24, 2015
Penn Stater Conference Center, University Park, PA. This is
a final strategic planning and roadmapping meeting. Attendance will be by invitation only.
http://www.nist.gov/amo/upload/PennState_Calendar.pdf
Thank you! Hope we get a good answer!
Bought in at 10.80, look at this baby climb!!
Yes, I'm holding out hope webcast is very positive. Still wish for some printer contracts before end of year and a photo release of installed printer perhaps?
Gltu!
Patiently waiting for the big day we go green!
Really appreciate your post.
Any of the "big" names in 3d printing realm all seem to have ties to Sigma labs In some way (materialise, EOS, Ge and their fuel nozzles, not to mention military Applications)
2015 will be the year of great growth for all 3d printing imo especially this little company.
I really think we'll get some left-field news here soon regarding contracts, maybe before webcast?
Thanks again for sharing your insight!
Kudos for your find. I really believe that there is a connection there. This is definitely something we should ask next week during the Q&A session..
Okay, I emailed him regarding webinar as well and he said the presentation slideshow will be posted prior to the conference (as previous webinars have) he also said that they will discuss Q3 earning and hold a Q&A session afterwards.
If history repeats itself, we should expect news prior to the webinar as in the past...
Glta! Happy as always to be here!
Nice close today! Imo Euromold will bump this up more this week!
NEW logo!!! Can someone add this up top?
https://presentations.inxpo.com/FileLibrary/558/4/SIGMA_presentation_logo.jpg
Love the TM
BIG!!!!
We have the opportunity to see what's inside every part that's being built, as it's being produced, so companies are working to produce cameras and feedback systems and so forth so that problems can be solved.
Heller: The future emphasis of 3D printing manufacturing is going to be more emphasis on quality controls, quality assurance, validating the technology.
Wohlers: That's correct. That's a big part of it, absolutely.
Looks like just in time! Man what a run so far today!
I have no doubt EOS will be the printer of choice for GE. Just wait for the order!
Bought back in today, sold around a year ago around $80 and don't believe these prices will stay this low very long...
Glta!!
Email reply:
Thank You for pointing out this publication to me. The raw productivity of metal 3D printing remains an area of great interest and continuing work here at Interactive Machines, Inc. However, we have not had any discussion with Beyond 6 Sigma/Sigma Labs. in this topic area during 2014.
Best Regards;
Francis Yopak
Interactive Machines, Inc.
So guess thats pretty much dead in the water?
Sent an email off to Mr. Yopak, will let you know what (if any) response I get. Thanks for reminding the board of this article!
Thanks for the post! Glad to hear printer is installed and will be up and running soon...perhaps ahead of schedule?!
National Geographic Magazine Article December 2014
Many mentions of GE and their fuel nozzles throughout the article.
http://ngm.nationalgeographic.com/2014/12/3d-printer/smith-text
Love it. Can't hurt to try, right??
P.s I feel ya. Product was launched Sept 8th....it's time to announce some sales!
3D printing segment on CNBC
http://finance.yahoo.com/video/trading-3-d-pro-loves-221700675.html?.tsrc=applewf
$ONVO
http://finance.yahoo.com/video/trading-3-d-pro-loves-221700675.html?.tsrc=applewf
CNBC special report on 3d printing
"For the first time, the engine, called LEAP, flew with 19 fuel nozzles 3D-printed by a computer-guided laser from layers of metal powder"
“We designed these nozzles to efficiently feed fuel into the jet engine, but they are also a work of art,” says Greg Morris, a 3D-printing pioneer who leads additive manufacturing research at GE Aviation. (GE Aviation acquired his company, Morris Technologies, in 2012.) “Methods like 3D printing give designers new freedoms and unleash their imagination. You couldn’t make this nozzle any other way.”
"We want to maximize its use across all of GE’s businesses."
http://www.gereports.com/post/102897646835/new-research-center-will-take-3d-printing-to-the-next#prclt-iopscz12
(Apologies is posted already, but thought sharing again plus highlights would be beneficial)
$SGLB
Great info, thank you! I'll have to check it out.
Strategically, what time would make best sense to announce revenue/contracts? What are requirements of announcing? (I.e. Before ink dries or do they have a few days leeway?)
I would think beginning of December, to give market a few weeks before holidays to reflect it. Just my 2 cents.
Yes! I suspect a VERY Merry Christmas this year.
23 days....
Yes!
Thoughts regarding this:
Initial revenue is expected as early as the fourth quarter of 2014. (From Inspect)
Do we think this is the Big GE order? Or something from left field?
P.S we're halfway through 4th Quarter!
You are absolutely right. This is a pretty unique board as it has so many great members on it. Warm "fuzzies" from my Sigma-maniacs family...
So sorry for your loss. Prayers to you and your family during this time.
I have that "gut" feeling too that this quarter will bring some significant news for the company.
I'm locked and loaded.
Lol, no problem. Overall, Q3 looks about like I'd expect. Don't forget this is for ending Sept. 30th and I'm sure much has transpired since then. I'm still expecting contracts of some sort before Thanksgiving...all these conferences I'm sure they've attracted some interest in parts production.
Glta!
What about this:
"The Company continues its previously-announced work with Materialise NV of Belgium, GE, Adurant Technologies, and other organizations to test, advance, and strengthen Sigma Labs’ propriety IPQA® technology."