Register for free to join our community of investors and share your ideas. You will also get access to streaming quotes, interactive charts, trades, portfolio, live options flow and more tools.
Register for free to join our community of investors and share your ideas. You will also get access to streaming quotes, interactive charts, trades, portfolio, live options flow and more tools.
Let's do a penny!Was in the red $6k two months ago and now I am green $6k. Don't think I will ever see red again on my PLNI account. I'm averaged in at .0064 but my first lot was at .0143, then a lot in the .008's, then the .004's. I say this because you folks averaged in higher just hold on. Your day is coming and it's coming fast. Starting to get very exciting, but I want Nano's $1 before I sell and will be patient as well. GLTA!
Dumb question about the level II colors i.e. wht, pink, green.
What do they stand for white are buys, pink ?, green ?
Here we go! .05 in no time!
The spread is nearly 10%. Anytime the relative spread widens to this point expect liquidity to dry up. Hence a low volume today.
The MM's are not buying! eom
TAKI, me as well. I've been in this for nine months and
it's starting to get exciting. Just broke even again today.
Hopefully only up from here. Could be a life changer for me with 2.2mm shares; GLTA.
Moving north slowly but surely. .0064 bid .0065 ask.
Two legit trades were made at .062 today.
Somebody had a bad typo day and will wait a while to
break even on that boo boo! Then again; maybe
they only need to wait until Febuary 1st to break even.
I just saw the 900% as well. I went directly to the PR's
because I thought I was going to sh"t. Just a goof though!
Must be a glimpse of things to come!
BTW; VFIN at .0065 as of 12:50pm
Top four MM's all tied for the ask at .0063. Getting better!
Yeah but VFIN just went on the ask for .0062 with NITE right behind them at the .0063. Let's see how it shakes out!
I agree; take care of this Nano! It's old and obvious DD that
a beginner can find and always spun in a negative manner.
I need his opinions like I need a hemorrhoid.
Look at the 52 week high of .019 and the PR's surrounding
the timeline when it hit that PPS. That news was mostly PR appearences by Turek, the Semco acquistion annoucement, the 200 million share buyback, etc. None of them compared to what has been proposed to be annouced by months end and we are that much further into company developments i.e. ProMold, etc. I don't think .01 is out of the question if the PR's come out. People that I trust have talked to the company in the past few months and have heard a short term PPS of .05 and as high as .16 or better by the end of within 2006 or better. I am not a pumper and have been in the pennies for less than a year. These are speculative PPS goals estimated by PLNI sources via DD. On the other hand if news does not come out and we go into Febuary then the old "credibility" problems that have plagued PLNI in the past may reflect in the PPS until the news does come out. Just my opinion and GLTA!
Nano, If/when it goes to $1 I will be wiping myself for months.
Is anyone in the black this week and by how much if you don't mind me asking? I was up $3k when it hit in the 8's last week, but I am long on this so I hold. I'm averaged in at .0064 with 2.2mm shares. I am upside down $800 now or a good weeks worth of groceries at BJ's. With the potential of what this amount of shares will do for me over the next two-three years; I consider any of the above chicken feed! I won't take profits until its at .50 or better and I realize it will fluctuate all over the map until then!I'm 46 yrs old and I want PLNI to retire me at the age of 50. That is my price point not just a "profit" which is a relative term of course. Good luck to the day traders/shorts who just want a new ATV or motorcycle out of this. You may only need to wait another few weeks so start shopping. I'd be curious to hear other peoples goals on PLNI. GLTA
Been with this stock for six months now through thick and thin.
Was in the red $6k two weeks ago and now I am in the black $3k and its only going to get better. This one is a life changer at 2mm shares plus. Anyone else in the black yet?
Well Said KG4! Been in since August. I lurk and read most posts, the past PR's, and have made a couple of calls, etc.
I rarely post on any of the three boards. Too much has been said by everyone but the company. I have some doubts but I am a 80% believer that this will make all of us "longs" (one year plus) wealthy. If within that other 20% I lose my $10k then it was green money from a $122k real estate investment gain anyway.
You can tell which ones are using "grocery" money and which ones are not. I am tired of listening to the crying and the bashing on RB, SI and IHUB. Either suck it up, get out, or go to gambler's anonymous.
fynley; 100% in agreement! "Patience is a virtue".
Plasticons new future value. Based on Promold's revenues and Semco's revenues, the pattern value, the mold's value, the $1M in backlogs, etc. Can anyone estimate EPS and the
the PPS based on that from your past experiences?
I know we need the audit but based on what the estimates and DD has shown. Someone posted this estimate a few months ago.
540,000 averaged in at .0093
So if MM's are manipulating the PLNI PPS
then will the acquisition with Pro-mold on
the 9th and Semco on the 17th reverse the trend?
If not then what does? Time? Audit? Increased earnings
over the next year or three?
Thank you nanopatent for clearing up the 5billion share mess.
This company will "succeed" at their own pace and knowledge
of the manufacturing and distribution of plastic hardware
to the DOT and building industry's. The demand is in the billions/year. There has been too much DD verifying the validity of Bluelinx distribution, Pro-mold and Semco acquisitions by many folks to nullify the truth. I believe the acquisition dates will be met, the orders will increase, the audit will come shortly after and I will be a millionaire within the next few years thanks to PLNI. If you don't believe the above then the answer is simple. "Sell" when your time is right, take your loss of money and loss of faith in PLNI with emotional strength because I don't want to read the weakness but I'm sure the crying will continue here, on RB and elsewhere. I am upside down on this thousands of dollars since I'm averaged in at .0121, but "I will hold my tickets" for years if that's what kind of patience it takes. Keep the faith!
An injection molding manufacturer does not commit millions of dollars in capitol equipment i.e. unless they have the business to support it. The PPS seems to be refecting more confidence today.
They say "MM's"???????
1.9million shares @ .0123 right before bell again!
South .0005 and its the beginning of a new month
and quarter. Any ideas about this?
3,000,000 shares @.0129 right before the bell.
What causes this?
Up .0011 to .013 on this PR. I say keep them coming regardless
of what the "emotional bashers" say! Trade on logic; not
emotions.
Being "green" to pennies and all the excitement over
a conference call; I thought we would see a gain
today not a .0012 loss so far. Any educators out there
to help me understand this game???
This maybe off this forums subject matter. If it is I apologize
ahead of time. I am a newbie to pennies and I am enjoying the ride. I started in Febuary and I've flipped four stocks; I'm up about 25% and have put all my dollars into PLNI for now and hope to hold them for years.
So historically what does unaudited financials do for a stock price and then what will the audited do? Are we expecting higher PLNI profits for this fiscal year hence higher share price?
Pundit's claim was to "double or better over six to twelve months". I don't find doubling over six months to be that enthusiastic a goal but maybe I am too green to pennies.
I understand nobody has a "crystal ball" but maybe some of you have experience in a similar situation. Thanks to all who are educating me on PLNI and pennies in general.
I get it now! Thanks nano!
Where is "Latest pundit's predictions" on PLNI
Within investorshubs boards or elsewhere?
Nice job Nano. Thank you for becoming new moderator!
Plasticon Announces New Direct Customer Service Line With BLUELINX, the Largest Building Materials Distributor in the U.S.
Good Morning Folks!
Its great to be part of a very active stock and message board for a change. I am new to pennies and I'm finding it to be very exciting. Here's my two cents:
I'm a mechanical design engineer and work for a fortune 100 defense contractor. While my forte is not in FEA (Finite Element Analysis). I contracted and consulted for 42 different high tech manufacturers over the last 27 yrs. I have been exposed to many steel and plastic structures though not in the civil engineering sector i.e. bridges. Fifteen years ago I designed a biomedical plastic connector made of a polycarbonate plastic i.e. one of the strongest plastics out there. It was to be inserted permanently into the human body. These parts needed to withstand certain biomed acids, fluids, needed lots of life cycle testing, etc so the material did not break up within the body. The connector was a success.
While this example proves nothing about plastic holding up bridges, it does show what certain plastics can do.
Certain plastics that are glass filled reinforced or fiber reinforced, etc can achieve the strength of steel today with much higher anti-corrosive properties than steel.
Recycled plastics that are cleaned, filtered, reprocessed, etc and combined with other materials can withstand huge loads. GE, among other manufacturers have volumes on plastics and they go out of revision yearly if not monthly due to R&D in the plastics industry. A part by itself under a load vs an assembly of parts under the same load will create much different and stronger structural characteristics. Anti-corrosiveness seems to be a big part of plasticons equation which makes plenty of sense over steel whether chromated or not. Cost of steel vs plastic also seems to be a factor. Steel is much more expensive to extrude or forge vs injected or extruded plastics technology.
I do not doubt Plasticon's ability to create a structural plastic part that directly applies to a subsequent process or structural assembly that can hold up a bridge i.e. rebar rod stock! The technology is out there! I am a shareholder.
Does anybody know when earnings come out for HKBV?
Great activity!
This is nice to see! Are we getting any news soon? We had a few months in a row but nothing since the soccer sponser.
Some investors jumped in at .005???????????????
Lots of potential here!Can someone point me to any historical data for companies like Red Bull? Especially their days in the pennies. I want to see what other beverage company growth patterns have been.