Register for free to join our community of investors and share your ideas. You will also get access to streaming quotes, interactive charts, trades, portfolio, live options flow and more tools.
Register for free to join our community of investors and share your ideas. You will also get access to streaming quotes, interactive charts, trades, portfolio, live options flow and more tools.
OPPS.. I mispelled "Aging". Could someone please correct it for me when they get the time.
I don't know any other way to spell it. It doesn't show up as a misspelled word on my spellchecker.
OPPS and mispelled do though.
Phil
Primer is not made to cover, it's made to seal and prime.
Since you are using Gardz, it will serve as a primer.
Now, if you skim coat with drywall mud over the Gardz, you are going to have to seal the skimmed spots. You can just spot prime over those spots though, and you can use the Gardz to do that so you don't have to buy a white primer.
Most quality acrylic finish coats are self priming. Read your label thoroughly and it will tell you if it's self priming or not.
Good luck,
Phil
Score to what?
Top boards?
I don't know that there is one.
Phil
This won't be an award you can refuse.
LOL
Phil
I was thinking that you, Churak and I could all run for it. There are hundreds of others that could run too though.
Phil
There would be a lot of contenders for #1.
Phil
Wallboard indeed is sheetrock or drywall.
Next time you are near a paint store or one of the big boxes that sells Kilz products, go in and ask them if they have a display of Gardz on a piece of drywall.
You'll be impressed.
Doesn't matter where you live.
Very few products will stick well to drywall once the outer layer of paper has been removed. Nor will water based products adhere well to water soluble wallcovering adhesives.
Most professional painters use Gardz when that is the case.
Phil
Gardz is specifically made to soak in and seal up wallboard when the surface layer of paper has been removed.
Drywall mud or latex primer is nowhere near as good on that substrate, and in fact, will probably not adhere. Especially a cheap latex primer.
In addition, it will seal up any remaining adhesive pnew failed to remove. If he tries to skim coat with drywall mud over that adhesive, it will probably turn loose and fall off the wall.
I highly recommend the use of Gardz in this case.
Phil
tab and enter are just as easy and already work.
Phil
There were so many lies, it's hard to pick my favorite ones.
The pig farm and GC2000 rank high on the list though, along with the buyout rumors.
Phil
If you are looking for truth, Jared is the wrong place to look.
He is a crook.
Good luck,
Phil
Everything that this company has ever put out in PRs and elsewhere has been a crock of crap and nothing but lies. If it moves much due to this PR it will be short lived, but I don't expect the market to believe it's the truth.
Like one posted, a few traders might make make a few pennies on it, but I doubt the current bagholders will.
Phil
No question Jared should step down.
He should have already done so.
Phil
I don't know for sure which of us is correct, but I think I am.
Phil
You missed the mark when you assumed the shares were restricted.
the shares that Carnes was issued were never registered.
You need to read the SEC complaint again.
Phil
Foolish shareholders?
Posted by: insanecurrencytrader Member Level Date: Tuesday, December 29, 2009 9:43:57 AM
In reply to: tutu9 who wrote msg# 7121 Post # of 8791
it will never go below .007 never again in your lifetime
LOL
Have fun,
Phil
See if you can look up a local number for them.
All we can find is an 800# and we get the answering machine.
Phil
They have not charged his CC, but he is afraid they will if they ever get around to sending the parts.
Sometimes the parts are not returnable and even if they are it's still a PITA.
We are talking about several hundred dollars in parts.
He is rebuilding a motor for me.
Phil
I would like you to go by there and see if they are still in business.
They have an answering machine, but they don't return calls nor answer e-mails.
He can't get in touch with them to cancel the order.
Phil
The address listed is 100 Shore Rd., Glenwood Landing.
http://www.google.com/search?hl=en&q=Glenwood+Landing%2C+New+York+11547&sourceid=navclient-ff&rlz=1B3GGGL_enUS345US345&ie=UTF-8
Phil
Carlos, do you live near this place? It's on Long Island.
My boat mechanic ordered some parts from them and can't get in touch with them. The parts have been on order since November.
They have his CC# and he doesn't want to order the parts from another supplier for fear of a double shipment. I would like someone that lives close by to check it out, if possible.
Best Boat Parts.com
Post Office Box 101
100 Shore Road
Glenwood Landing, New York 11547
TIA,
Phil
Anyone live near this place?
My boat mechanic ordered some parts from them and can't get in touch with them. The parts have been on order since November.
They have his CC# and he doesn't want to order the parts from another supplier for fear of a double shipment. I would like someone that lives close by to check it out, if possible.
Best Boat Parts.com
Post Office Box 101
100 Shore Road
Glenwood Landing, New York 11547
TIA,
Phil
Sorry to hear that Heather. If you want to write up something about him I'll add him to the Ibox on my memorial board.
Looks like he lived a long life though. 92?
Phil
I might be able to roll up in blankets and survive for a couple of hours @ 44 degrees, but why?
My truck had a full tank of gas and the outside temps were in the teens.
I was warm as toast in the truck with the engine running.
Phil
About a month ago, I ran out of propane here at my camper.
I called for an emergency delivery at about 3AM in the morning but found that it would be several hours before I could get it.
I went outside and sat in my truck with the engine running until the propane arrived.
The temps were in the upper teens.
Screw living with no heat.
Phil
Weren't you the one that posted that the share price would never drop below .007 ever again?
LOL
Phil
Have you checked the stock prices on the listed companies?
I know a lot of them that are discussed on Ihub are in the triple zeros.
Phil
Post Unavailable
Additional Information
You should be familiar with the board, since you are a moderator.
Why complain that there is nowhere to complain when you already know there is.
There is nothing we can do with/about non-disclosing paid pumper clowns even though we know who they are.
So quit whining about it.
Phil
You must not get around the boards much.
greedy malone has got a board dedicated to "calling out" the promoters and exposing their performance.
As expected, most promoters just provide exposure so the insiders can dump their shares on innocent and unsuspecting newbies that don't understand how the penny stock game works.
Phil
http://investorshub.advfn.com/boards/board.aspx?board_id=15296
If you alert Admin in advance of such actions, I think they will allow it as long as you don't post to each other on a stock specific board, and also don't post at all on the same stock specific board.
Phil
Coming from you, I think being called a weenie as a compliment.
Phil
I am about as far as I can get from calling you a "bud".
I consider you to be a first class pumper clown.
If you think preying on innocent and unsuspecting newbies a mark of success, you are definitely way ahead of me.
Please excuse me if I don't congratulate you though.
Phil
Most that have been around the penny stock boards awhile know that penny stocks are for trading and not long term investing.
But occasionally a newbie gets sucked into thinking a pinky POS stock with a gagged TA is going to make them rich.
They are the ones the "bashers" are trying to save.
What is the motivation?
For me it's in hoping I can save even one penny stock gambler from losing their life savings.
The boards are littered with people that have gambled away their children's college savings accounts and taken out second mortgages on their homes to gamble on the penny stock garbage that is constantly pumped on Ihub.
If you feel OK when you steal from them, that's your business, but I enjoy attempting to keep people like you from stealing from them.
Phil
Slow night for you and "rose" at the asylum?
Phil
Due to the nature of Ihub being a pumper clown haven, "bashers" need to be at least three times as careful to be in compliance of the TOU as pumper clowns.
I seriously doubt that that you are incapable of dealing with the negative posters that cross your path.
So deal with them and quit whining about them.
Phil
I see that whoever it was that posted that suggestion to you was taken seriously.
Your posts that I have reviewed lately have been well within the TOU.
Great job,
Phil
P.S. I wish I could say the same about mine.
Let me see if I can get this straight.
Pumper clowns should be allowed to troll the boards and post whatever they want but negative posters should be limited in their replies to the pumper clowns?
Is that it in a nutshell?
Phil