Register for free to join our community of investors and share your ideas. You will also get access to streaming quotes, interactive charts, trades, portfolio, live options flow and more tools.
Register for free to join our community of investors and share your ideas. You will also get access to streaming quotes, interactive charts, trades, portfolio, live options flow and more tools.
I sent this email to Heddle on 9/23/2021
When will we hear from you?
As you are aware I support P2O and hope for the success of the company. I try to put P2O in a positive position by adding relevant information about the industry and P2O in particular. I call it as I see it in all fairness to the company. I can’t keep fighting for the success of P2O without some help from P2O in the form of shareholder updates, P2O updates, or some type of encouraging communication from you about recent activity that will help P2O succeed. There is not a lot of positive support for P2O out there and I’m on the way out unless you become more active with P2O. Hope the best for your shipyards and P2O.
JBIIRULES
rheddle@heddleshipyards.com
No reply from him
Hope the best for you longs
Taking a break
Is this post for Heddle?
He’s more than a one man band
9.9 Billion reasons why the competition wants P2O-to-fail
Quote:
$9.9 billion in U.S. economic output from new plastics recycling and recovery operations,
including:
o $4.1 billion related to increased products generated by the facilities.
o $5.8 billion in additional supplier and payroll-induced impacts
https://plastics.americanchemistry.com/Economic-Impact-of-Advanced-Plastics-Recycling-and-Recovery-Facilities-in-the-United-States.pdf
Anyone who follows P2O knows what’s going on
Go P2O!!!
Wrong. P2O is still a major player.
That is why the competition works relentlessly to try and discredit and silence her.
I would like to see P2O succeed in the face of all this competition.
But yeah there is a limit with no support from P2O....
C'mon management (1 man band) give us some BS pumping bullshit so we can get our money out of this scam and allow new so-to-be-Bagholders to take our place!
It's the way of the pennystock world Mr Heddle, so please pump this broken down lark and walk the tight rope between legal & illegal stock manipulation/promotion!!!
Your dear Bagholders deserve no less!!!
Quote:
YES THEY DO!!! P2O SEND OUT SOME NEWS!!!
P2O has successfully produced almost 700,000 gallons of fuel from plastics
Billions of dollars of investment opportunity
Let’s get going P2O!!!
ALERT!!! Please review this important P2O information:
P2O has produced almost 700,000 gallons of fuel!!!!!!!!!!!!!!!
Go P2O!!!
https://www.plastic2oil.com/site/fuel-productsAt
P2O produced 667,996 Gallons of Fuel from plastics
Looking forward to many processors being sold
... P2O let’s Go!!
The United Nations estimates that more than 8-million-tons-of-plastics-flow-into-the-oceans-each-year.
https://www.sciencedaily.com/releases/2019/02/190206131956.htm
Market demands P2O processor sales!!
Investors want to invest!!!
Looking for P2Os first sale to lead the way!!
P2O Arithmetic = 5 Billion
Venture capitalist urges massive plastics recycling investment...5-Billion
A Singapore-based circular economy-focused fund manager says $5 billion of investments annually in waste and recycling infrastructure can help stem the tide of discarded plastic flowing into oceans.
https://www.wastetodaymagazine.com/article/davos-forum-kaplan-plastic-recycling-investment-asia/
5 Billion investment is divided by 3 Million per processor = 1666.667 processors annually
That would clean up a lot of plastic waste!!
Let’s Go P2O!!!
P2O ARITHMETIC
1 Billion investment is divided by 3 Million per processor = 333.333 processors
1 Billion recently invested in P2Os competition
Yeah...1 Billion would do well for P2O!!
Let’s Go P2O!!!
The money is there!!!
https://www.chemengonline.com/brightmark-to-build-680-million-advanced-plastics-recycling-plant-in-georgia/?printmode=1
Thanks for the update. Hope P2O gets busy and catches up with what’s required. They seem to push everything to the last minute.
A patent in the USA would do wonders and with so much investment money floating around that would be a winning combination!!
Market demands P2O processor sales!!
Looking for P2Os first sale to lead the way!!
1 Billion recently invested in P2Os competition
Yeah...1 Billion would do well for P2O!!
Let’s Go P2O!!!
The money is there!!!
https://www.chemengonline.com/brightmark-to-build-680-million-advanced-plastics-recycling-plant-in-georgia/?printmode=1
P2O has competition... and empty-bag-holders
P2O has successfully produced fuel from plastics, over 600,000 gallons worth.
That is a fact
...other companies do not want P2O to succeed.
https://investorshub.advfn.com/boards/read_msg.aspx?message_id=165605388
ALERT!!! Please review this important P2O information:
P2O has produced almost 700,000 gallons of fuel!!!!!!!!!!!!!!!
Go P2O!!!
https://www.plastic2oil.com/site/fuel-productsAt
P2O does have the Canadian Patent. USA patent still being pursued.
That was a successful attempt with the patent office in Canada. They are still hopeful for the USA patent.
Patent Pending Process
The modular design of the P2O process is built on a structure of racked reactors, feeders and towers which allows for cost-effective process efficiencies.
Designed for Local Installation
Plastic2Oil's P2O processor has evolved significantly since inception. In its current configuration, the processor requires approximately 4,500 sq. ft. to operate which makes it ideal for local site installations. General operations involve monitoring the control room screens and cameras to track each processor's operating parameters, as well as loading plastic onto the in-feed system.
The Processor
The processor accepts unwashed, unsorted waste plastics, composites and commingled materials.
Although many sources of feedstock are available, we are focusing initially on post-commercial and industrial sources, since these are readily available in large supply, and present a cost-effective solution for companies.
The hopper can be loaded with up to 4,000 lbs. of plastic feedstock per machine per hour using a forklift. The plastic is loaded into the pre-melt reactor by a continuous conveyor between the hopper and the reactor. The plastic is then heated using the off-gases produced by the process.
After the plastic has been liquified in the pre-melt reactor it passes through a solids-liquids separator before going into the main reactor.
The Main Reactor
In the main reactor, the liquified plastic hydrocarbons are cracked into various shorter hydrocarbon chains and exit in a gaseous state.
Plastic2Oil's proprietary catalyst and unique process engineering enables us to capture an average of 86% of the hydrocarbon content of plastic.
The Petcoke residue produced at this stage (approx. 2-4%) remains in the processor chamber and is automatically removed while the processor is in operation.
Plastic2Oil Processor Layout
Fuel Output
From the main reactor, the gases that are fuel oil and diesel are condensed and separated, then proceed into temporary fuel tanks. All of the gaseous "light fractions" or off-gases (approx. 10-12% of process output), such as methane, ethane, butane and propane, exit the system and are used to fuel the furnaces.
The fuel output is transferred to additional tanks for storage automatically by the system. Our automation system controls the conveyor feed rate, manages system temperatures and the off-gas compression systems, as well as periodically pumping out the newly created fuel to storage tanks. The P2O process is 'closed-loop'.
Quality Control
Significant technological advantages have been integrated to downstream operations to guarantee fuel quality, along with installing an inline fuel additive injection system on both heavy and light fuel condensing systems. We have also engineered a hot-tap residue removal process.
Quality control includes two columns for control and specificity of fuel fractions, a cyclone (particulate removal in vapor), fuel filters (particulate removal in liquid), and a centrifuge (additional redundant particulate trap), as well as column enhancements to guarantee particulate free fuel.
Fuel additives are injected inline while fuel is being produced to increase their effectiveness. The residue removal system works while the processor is running; the reactor does not have to be cooled down or stopped to remove residue.
Modular Design
The Company created a modular design and standardized the system to racked reactors, feeders and towers. This reduced the system footprint to a few unique modules, making fabrication and installation for deployment simpler.
Over the years, upgrades have included the installation of low NOx burners and the addition of a pre-melt system to increase through-put volumes. The Company has worked with third party fabricators to produce standardized reactors and towers.
A cyclone is used in the second machine to help remove particulate matter in the vapor stream.
Many of the P2O process variations are unique to Plastic2Oil and the Company has filed for international patent protection.
The Company will continue to seek patent protection on subsequent innovations as they are developed and require protecting.
https://www.plastic2oil.com/site/patent-pending
Venture capitalist urges massive plastics recycling investment...5-Billion
A Singapore-based circular economy-focused fund manager says $5 billion of investments annually in waste and recycling infrastructure can help stem the tide of discarded plastic flowing into oceans.
https://www.wastetodaymagazine.com/article/davos-forum-kaplan-plastic-recycling-investment-asia/
Renewed website. Updated financials on OTC.
Looking for more GOOD NEWS!!!
Let’s Go!!!
The Plastic2Oil Advantage
With its revolutionary Plastic2Oil (P2O) technology, Plastic2Oil Inc. has pioneered the development of a process that derives ultra-clean, ultra-low sulphur fuel which does not require further refining, directly from unwashed, unsorted waste plastics.
https://www.plastic2oil.com/site/p2o-technology-advantage
P2O® Process Emissions
To ensure that the impact of the P2O process on the environment was minimal, Plastic2Oil committed significant resources to air emissions stack testing with CRA, a global environmental consulting company.
Airborne Emission Test Results
Since the Company’s inception, the Plastic2Oil process has undergone several stack emissions tests under the supervision of the New York State Department of Environmental Conservation (NYSDEC), performed by Conestoga-Rovers & Associates (CRA).
The P2O process emissions are well within the accepted parameters for air emissions for the State of New York.
Historically, the Plastic2Oil process has been issued its required permitting in a timely fashion in New York State, traditionally one of the stricter states in the US to seek permitting.
In December 2011, CRA completed the stack tests analyzing the emissions from the P2O process.
The profile of the emissions generated by the process during the second test is shown below.
Plastic2OIl Process Emissions Results
The CRA results from the stack tests completed in both September 2010 and December 2011 reaffirm other findings that the operation of the P2O processor is a clean, "green" process.
The stack test from December 2011 was performed on the existing commercial processor with a pre-melt system and produced results showing emissions decreased with increased plastic feed rates; further validating that the P2O process is highly green, clean and scalable.
The emissions documented by CRA from the P2O stack test were lower than what would be produced by the same test on a natural gas furnace of similar size.
The process puts a high percentage of oxygen back into the air, with minimal harmful emissions, well within the regulatory criteria established by the NYSDEC.
The company underwent a stack test in December of 2012 in conjunction with seeking permitting to run heat transfer fluids (HTF), which act as plastic densifiers and heat exchange agents, with plastic feedstock.
The results of the December 2012 stack test further validated the process and confirmed that the P2O process emits approximately the same emissions of a natural gas furnace of the same size.
https://www.plastic2oil.com/site/process-emissions
Clean Fuel Production
One of the most significant differences between our process and any other waste into fuel process we've seen on the market to date is the quality of our fuel.
Defining Quality
At Plastic2Oil, 'quality' means 'ultra-clean, ultra-low sulphur' fuel products which do not require further refining.
Fuel Analysis Equipment
To support us in producing our high quality fuel products, Plastic2Oil has a fully equipped fuel testing laboratory, which includes:
Molecular Analysis Equipment GC/MS
Gas Chromatograph with Mass Spectrophotometer; GC/FID - Gas Chromatograph with Flame Ionization Detector; ICP-OES - Inductively Coupled Plasma Atomic Emission Spectroscopy; Distillation Unit
Fuel Specifications Analysis
ISL Sulphur Analyzer; ISL Silicone Analyzer; ISL Cloud Point Tester; ISL Pour Point Tester; ISL Flash Point Tester; Centrifuge; Lab Furnace; Temperature Controlled Environmental Chamber with Recorder
The Importance of Ultra-Low Sulphur Diesel Fuel
Ultra-low sulphur diesel is a type of diesel fuel that contains 15 parts per million (ppm) or lower sulphur content. This diesel fuel is often referred to as “clean diesel” because the sulphur content has been reduced by more than 95%. In 2010, the U.S. Environmental Protection Agency (EPA) mandated that 100% of highway diesel imported into or refined in the U.S. must meet this low sulphur standard. The reduction of sulphur in diesel enables and preserves the operation of advanced emissions control systems on light- and heavy-duty diesel vehicles.
The use of advanced emissions controls leads to an environmental benefit where oxides of nitrogen and other pollutant particulates are drastically diminished. Currently, ultra-low sulphur diesel is primarily produced by petroleum. P2O's ultra-low sulphur diesel offers a unique alternative that is high quality, ultra-clean fuel derived from a plastic waste feedstock.
Fuel Comparison
The fuel quality from our P2O process is notably superior to the typical boiler fuel purchased by large industrial users, as shown below.
On website
https://www.plastic2oil.com/site/environmental-impact-clean-fuel-production
YES THEY ARE VERY VERY WORRIED
Seems odd to worry about a non-operational shell getting funded, yes?
Looking forward to the first sale!!
Let’s Go P2O!!!
Market demands P2O processor sales!!
Looking for P2Os first or sale to lead the way!! Looking
Ppl
Technology Insights...The pyrolysis technology...
The pyrolysis technology led the market and accounted for 65.3% share of the global revenue in 2019. This technique processes mixed, unwashed, and soiled plastics more efficiently than other technologies. Moreover, numerous fuel types can be generated through this technology such as biofuel, solid residue, and synthetic gas. These factors are anticipated to drive the pyrolysis technology during the forecast period.
End-fuel Insights
Crude oil led the market and accounted for 55.1% share of the global revenue in 2019. The wide application of crude oil produced from plastic in automobiles, boilers, ships, tractors and trucks, power generators, and construction machinery is projected to boost the market over the forecast period. The rising consumption of crude oil as a fuel in the U.S., China, Japan, India, and Brazil due to the burgeoning automotive industry in these countries is likely to propel the plastic to fuel the market over the forecast period once the COVID-19 pandemic is tackled.
Since the technology is under development, the market is fragmented with few companies providing commercial plastic to fuel technologies. The companies are now concentrating on offering shareholders long-term value in order to grow and survive in the market.
https://www.grandviewresearch.com/industry-analysis/plastic-to-fuel-market
Plastic Waste to Oil-Market Huge Demand by 2025
Let’s go P2O!!!
Recycled Plastic & Plastic Waste to Oil Market Business Strategies and Huge Demand by 2025
The tremendously rising use of plastic has resulted in the generation of a massive amount of plastic waste across the globe. The level of plastic waste generation has grown significantly in developed economies worldwide. As a result, several leading players are focusing on innovative waste-conversation technologies, which is likely to help in reducing plastic waste in the next few years. The generation of clean and effective fuel from plastic waste is estimated to gain immense popularity in the coming years, thus encouraging the development of the global recycled plastic and plastic waste to oil market in the near future.
The rising awareness regarding the advantages of recycled plastic and plastic waste to oil and the benefits it offers to the environment are estimated to fuel the growth of the market in the next few years. As a result, several new players are anticipated to enter the global market and strengthen the competitive scenario in the coming years. In addition, the rising focus on the introduction of new products and technologies and research and development activities are estimated to offer promising growth prospects for the prominent players operating in the global recycled plastic and plastic waste to oil market in the coming years.
Furthermore, the rising number of initiatives by governments in order to encourage recycling of waste plastic is expected to accelerate the growth of the market in the coming years. Developed regions, including Europe and North America, are projected to witness promising growth in the near future. The availability of required infrastructure and funds are the key factors estimated to bolster the recycled plastics and plastic waste to oil market in the coming years.
https://manometcurrent.com/recycled-plastic-plastic-waste-to-oil-market-business-strategies-and-huge-demand-by-2025/?amp=1
For Newbies this post is misleading...
It has nothing to do with P2O but the company mentioned is a countertop recycling company.... two totally separate types of recycling
And if I’m not mistaken it’s closed down now...
Validation & Permitting
Reputable independent labs have validated the P2O technology including IsleChem (process engineering) and Conestoga-Rovers & Associates (emissions stack test). Plastic2Oil has been issued all necessary permits to operate by the New York State Department of Environmental Conservation (NYSDEC). Engineering report performed by SAIC validates and verifies the technology and economics.
Process
The conversion ratio for waste plastic into fuel averages 86%. Approximately 1 gallon of fuel is extracted from 8.3 lbs. of plastic. The processor uses its own off-gases as fuel (approximately 10-12% of process output); minimal energy is required to run the machine. Approximately 2-4% of the resulting product is Petcoke (Carbon Black), a high BTU fuel. Emissions are lower than a natural gas furnace of similar size, and the quality of the emissions improve with increased feed rates. Results from the final stack test performed by Conestoga-Rivers & Associates confirm that the processor emissions are well within the limits allowable under a NYSDEC air permit. The process operates at atmospheric pressure, and is not susceptible to pinhole leaks and/or other problems with other pressure and vacuum-based systems. The reusable catalyst is produced economically. The fuel produced is refined and separated without the high cost of a distillation tower.
Fuel Output
Fuel quality has been validated by multiple independent petro-chemical labs including: Intertek, PetroLabs, Alberta Resource Council and Southwest Research Institute. All shipments leaving the P2O plant in Niagara Falls are tested by the Company's fully equipped internal fuel testing lab. Fuel is ready for sale upon completion of processing without the need for further refinement. From a single processor the Company can produce a range of fuel products, without further refining, including No. 2 Fuel (Diesel, Petroleum Distillate), No. 6 Fuel, Naphtha, Petcoke (Carbon Black), and Off-Gases to be used in the P2O process.
https://www.plastic2oil.com/site/p2o-technology-advantage
There is no truth in this PTOI company assertion, therefore propaganda.
Not a speck of it.
P2O has competition... and empty-bag-holders
P2O has successfully produced fuel from plastics, over 600,000 gallons worth.
That is a fact
...other companies do not want P2O to succeed.
https://investorshub.advfn.com/boards/read
The competition does not want P2O funded
Let’s go P2O!!!
The First Sale will be the difference!!!
They have been active in recent days and that is a POSITIVE SIGN!!!
One good day will change this stock price!
Let’s Go P2O!!!
Renewed website. Updated financials on OTC.
Looking for more GOOD NEWS!!!
Let’s Go!!!
Plastic2Oil P2O Off Products
The P2O processor can produce a range of fuel products, which do not require further refining.
Off Products of the P2O Process
In addition, approximately 10-12% of the output of the P2O process is a range of off-gases. These include hydrogen, propane and butane, which are utilized to run the P2O processor, as well as petcoke.
All off-products produced by P2O have commercial value in various applications.
No. 6 Fuel
No. 6 Fuel is heavy fuel generally used in industrial boilers and ships. No. 6 Fuel produced by the P2O process is the Company’s cleanest product when compared with existing industry standards, containing less than 16 ppm of sulphur in comparison with the maximum of 30,000 ppm allowable in mainstream No. 6 Fuels.
No. 6 Fuel products produced by competing process are residue products of the refining process and are considered residue fuels.
Plastic2Oil No. 6 Fuel, however, is a direct product of its P2O process, meaning it does not require further blending.
Plastic2Oil No. 6 Fuel is a clear brown liquid at temperatures of 90º F. It has been tested by major industrial users with positive results.
https://www.plastic2oil.com/site/fuel-products
Yeah...680 millions worth...would do well for P2O!!
Let’s Go P2O!!!
https://www.chemengonline.com/brightmark-to-build-680-million-advanced-plastics-recycling-plant-in-georgia/?printmode=1
Oh oh...
The same old crapflood resumes...
Converting waste plastic to ultra-clean, ultra-low sulphur fuel.
Plastic2Oil® is a clean energy company that recycles waste plastic into liquid fuels, providing economic and environmental benefits.
https://www.plastic2oil.com/site/home
Can you imagine.,. People are paid to sabotage-P2O
Wow what a world we live in...
With all this plastic mess they should encourage P2O
But instead they sabotage...
Hope they sell a processor soon!!!!
Prove the ability of the processor!!!
And sell 100s and 100s of beautiful processors!!
And the stock back in the 7 dollars would be a glorious day!!!
Time will tell!!!
Lets Go P2O!!!