SCIENCE SPIN-OFFS

[dockzef]

Ultra-Low Noise Amplifier Design for Magnetic Resonance Imaging systems

Mustafa A Kabel
(Submitted on 12 Jun 2017)

This paper demonstrates designing and developing of an Ultra-Low Noise Amplifier which should potentially increase the sensitivity of the existing Magnetic Resonance Imaging (MRI) systems. The Design of the LNA is fabricated and characterized including matching and input high power protection circuits. The estimate improvement of SNR of the LNA in comparison to room temperature operation is taken here. The Cascode amplifier topology is chosen to be investigated for high performance Low Noise amplifier design and for the fabrication. The fabricated PCB layout of the Cascode LNA is tested by using measurement instruments Spectrum Analyser and Vector Network analyzer. The measurements of fabricated PCB layout of the Cascode LNA at room temperature had the following performance, the operation frequency is 32 MHz, the noise figure is 0.45 dB at source impedance 50 {\Omega}, the gain is 11.6 dB, the output return loss is 21.1 dB, and the input return loss 0.12 dB and it is unconditionally stable for up to 6 GHz band. The goal of the research is achieved where the Cascode LNA had improvement of SNR.

https://arxiv.org/abs/1706.03507

look and see what we can do gets woven into the works