Xun Energy, Inc. (fka XNRG)

[pepeoil]

I stand by my opinion of your rinky dink separator. That is a non api separator. There is not enough volume in that separator to allow sufficient retention of the oil to allow all water to break out of oil, unless this well is a very low volume producer, such as non commercial. Installing a 1' hex head plug in the pumping tee is also cheap. A 1" ball valve is the industry standard. The sight glass on 2" side will leak and be an environmental hazard sooner than later. The cleaning fluids crews use, such as gasoline eat deteriorate that in a hurry. The stand the pumping unit was built on is rusty and no finished, not first class at all. A little sand blasting and painting or powder coating and the stand will last a life time. It wont be long before it rusts out now. Here is the link to Dragon Mfg's std 130 bbl salt water trailers.
http://www.dragonproductsltd.com/trailers/vacuum-trailers/?PhoneScript=ppc&gclid=CIzz79-KgsQCFQ6OaQod674AIw

Again, if you are going cheap, you can get a smaller one and just haul more loads. It costs the operator more, but the guy who owns the rinky dink truck loves it.