Eden Energy Ltd. (EDEYF)

[stealofadeal]

EDEYF My cheap one that I will take a stab at. I am patient here.

[stealofadeal]

We need eyes on this and exposure. Good stock but nobody buying or watching.

[stealofadeal]

EDEYF I think big profits are available for this cheap pps. Better days ahead IMO.

[stealofadeal]

EDEYF Monday I am getting my starter. The more DD I get the more I like this buy.

[stealofadeal]

EDEYF The chart looks good and oversold. I think a bounce here soon and took my starter.

[stealofadeal]

EDEYF The chart looks good and oversold. i think a bounce here soon and took my starter.

[vmp1]

Hi ncrmedia, firstly, thanks for having created this thread and appreciate you responded. I was looking for a USA forum where this EDEYF is discussed as discussion of penny/ otc stocks is not possible in the motley fool. You may want to look at the progress of this company since you last posted especially the US Updates in the last 3 months. Please refer to Edencrete.com u.s.a. site or edenenergy.com.au and let us know your thoughts. Other opinions discussed with regard to this stock are available in hotcopper.com.au. Best regards, v

[nrcmedia]

jesus...I have created this Frankenstein monster here. All you guys with zero posts on your record. Why are you all coming over here? I am out of this man. Whenever I see the pump squad come in I know it's time to go. Geez...how can a guy invest anymore?

[vmp1]

I've posted this in hotcopper and thought I'd post it here in case it is of interest to some. - regards

Were the I-20 and a maintenance facility actually the acid tests for Edencrete with stunning results?

I mentioned in my posts 3x the I-20 interstate highway which has no visible cracking 1 year on, but looking at the announcements I keep finding something special about it, and also with regard to the maint facility project reported in 1 April. Regarding I-20, EC was used in a troublesome section of the highway and has high water content in the sub-surface beneath the road surface, which often results in a relatively short service life of the concrete roadway surface.

With regard to the maintenance facility, this is what the 1 April announcement said:
"The concrete at the maintenance facility is exposed to extreme rolling loads, impact loads and abrasive wear; and several times each year, under a scheduled maintenance programme, sections of the hard stand area that are severely cracked and require replacement are ripped up and replaced "

What is the point? This: if the field trials in California, Colorado, New York, Georgia and Maryland before December 2016 are done in less problematic roads than I-20, I'd say the success rate is 100%, and if done in similar troublesome roads, I am confident the success rate is 99%. Now I'm comfortable to invest in a 99% success rate scenario. How about you?
Please D.y.o.r., foregoing is imo.
Cheers

---------------------------------------------------------------------------------------
For substantiation, Below was 19 July company update, (now add almost 3 months to the date, and would be nice if another update is provided even though I expect it's still intact.)
Eden Energy Limited (ASX: EDE) is pleased to announce a recent visual examination of the current state of repair of the EdenCreteTM enriched section of concrete laid on 26 August 2015 as a field trial of EdenCreteTM on a troublesome section of the Interstate Highway I-20 in Augusta, Georgia for the Georgia Department of Transportation (“GDOT”) (see Eden ASX Announcement ASX: EDE 27 August 2015 and Figure 1 below) is showing no visible cracking or significant signs of wear after 11 months of highway wear.
The control section, laid on 27 August 2015 on the adjoining section of the same lane on I- 20, and using the same concrete mix but containing no EdenCreteTM, is however, already showing a significant crack developing (see Figure 3 below), 11 months later.

The trial section of the I-20 has high water content in the sub-surface beneath the road surface, which often results in a relatively short service life of the concrete roadway surface.

This result from the EdenCreteTM I-20 Field Trial mirrors a similar result in a commercial field trial in October 2015 (see Eden ASX announcement ASX:EDE 1 April 2016) where, in a six months’ field trial of EdenCreteTM using of the same GDOT 24 Hour Repair Concrete Mix in an application that is subject to extreme wear and abrasion (see Figure 4), no cracking or visible wear was evident. However, there was significant cracking and visible wear in the control slab (see Figure 5) within the same 6 months period. As a result, EdenCreteTM was then selected for used is a subsequent commercial replacement programme at the site.

[MarkyBoy49]

Thanks for posting this vmp!

Things are hotting up!

Best regards!

MB

[Greenhorizon1]

Thanks for the detail VMP, this is a company that is built on solid foundations (Pun intended) As MB & yourself have often confirmed, they continue to methodically put all the pieces together for the long term benifits. I am looking for returns in three to four years, so this suits me perfectly.

[vmp1]

Company Update dated 7 October provides very significant information and based on these I totally agree with you Greenhorizon.
http://www.edenenergy.com.au/pdfs/5ffc81ceb24bdb798d1c802d44d5689b.pdf

Very encouraging highlights include the following:
"6 full time, highly experienced EdenCreteTM concrete admixture sales staff already appointed together with a highly experienced senior vice president responsible for national and international product development.
• US commercial trials have commenced: Up to 10 trials scheduled in California, Colorado, New York, Georgia and Maryland before December 2016.
The expansion of Eden’s Colorado based production capability of EdenCreteTM to a targeted maximum of 2 million -2.4 million gallons per year remains on schedule to be operational by early in 2017."

Whereas successful trials were done only in Colorado and Georgia previously, other states are lining up, and with the hiring of additional sales resources, the list are expected only to increase.
It is also noteworthy that the the Colorado plant is on schedule to finish early 2017. By that time, a good number of sales pipelines would be progressing well based on efforts from the sales team between now and 1st Qtr 2017.

Regards
V

[Greenhorizon1]

Hi VMP, They are obviously very confident that they have a great product and very high sales potential to be gearing up with this level of staff and the relevant expertise they (these employee's) have. Just makes me feel even more confident for the future.

[vmp1]

U.S. Marketing Staff update from 1 September company announcement:
"Eden assembling a highly experienced EdenCreteTM concrete admixture sales staff:
Five full time sales staff, including two managers, already appointed with a collective aggregate of 109 years’ high level experience covering more than 18 US states.
Negotiations are currently underway with six other potential seasoned sales staff to select the remainder of the initial Eden sales team."

The experienced team is no doubt employing the skills and connections gained from their previous employment to generate sales for Edencrete. Would be great to hear marketing breakthroughs soon.

Regards
V

[Woody222]

Thanks for posting Stegz. All I can add is that I wholeheartedly agree with you.
It has passed every official test required with flying colours as per the standards regulations.

[vmp1]

Edencrete newsletter available now is also a great source of information.
The newsletter, from this week, is devoted to edencrete...Here is a copy of the newsletter, for those who have not yet subscribed...http://www.edencrete.com/case-study/georgias-highways/

Other very recent version of investor presentation dated 1 September 2016 available in the company website on edenenergy.com.au
It shows there the field test on I-20 Interstate highway Georgia done in August 2015, a year has passed and still showing no evidence of cracking, whereas the control section has started cracking.
Regards

[stegz68]

Hi ,Hot copper is an Australian share forum,which i urge you to look at,Eden energy,It is an Australian coy that is about to make big waves in america with there carbon nano tube technology .
There concrete additive Edencreate is a revolution in new concrete technology making concrete stronger and less abrasive ,so less concrete is required saving money,They are currently building plants in Colorado and soon Augusta which will create many americian jobs.
Testing being completed by Georgia department of transport with outstanding results,
IMHO this is a once in a lifetime opportunity to get into a coy at the ground floor that is going to revolutionize the concrete industry world wide
Ps;Take time to read posts from MB Rolling and vmp to name a few,
Regards

[vmp1]

Thanks indeed MB. Cheers.

[Greenhorizon1]

Thanks VMP, been meaning to do that since yourself and MB mentioned it the other day.

[vmp1]

Hi all, if you haven't already subscribed to the Edencrete newsletter, you can do so at Edencrete.com. In addition to the investors presentation available at edenenergy.com.au the newsletter would be a nice source of information.
Regards

[Greenhorizon1]

Hi MB, Based on whats happening with EDE I feel quite sure your forecast growth figures are reasonably conservative. :)

[Woody222]

Thanks MB for posting this real eye opener info.

[Greenhorizon1]

Hi MB, All good information, thanks.

[MarkyBoy49]

Hi again woody,

here is an updated list of the things that I believe will happen over the next 3-6 months:

1. News that the GDOT has actually awarded the 2-3 tenders that will signal the first of many commercial orders that will be placed by the GDOT for 24 mix repair mix applications. FYI: The GDOT’s budget, for the next 10 years, is ca. US$ 1.4 billion p.a. so there is huge potential here for EdenCrete (and this is only in Georgia!).

2. News regarding further additions to the EdenCrete sales team and other appointments.

3. News that EdenCrete’s existing customer MARTA has put in another order (could come at any time but my bet is that it will come very soon).

4. Feedback from the ca. 9 companies that are currently trialling EdenCrete for “readymix” applications.

5. Feedback regarding several trials that are now being undertaken by companies in the “precast concrete” sector. FYI: the US precast concrete sector is worth ca. US$ 12 billion p.a.

6. News and/or rumours of very serious interest being shown by large institutional, private and corporate investors (could come at any time but my bet is that it will before the end of this year).

7. News about exactly when Colorado Stage 2 (CS2) will be fully operational (my feeling is that barring any unforeseen problems this should be in January 2017). FYI: CS2 will be producing up to 200,000 gallons of EdenCrete per month at a value of approximately US$5 million. By my calculations this will produce a profit of US$1 million per month (based on a profit margin of 20% which IMHO is a conservative estimate). And all this from nearly the very first month of operation!

8. News that other DOT's have commenced placing orders for 24 mix repair mix applications (my feeling is that this should be in the first quarter of next year).

9. News that apart from MARTA, other private commercial orders have been received (could come at any time, however, as previously mentioned, only the really major orders can be filled when CS2, is up and running early next year).

10. An update from the GDOT and/or the FHWA regarding the field test for Class A/Class 1 applications (my feeling is that this could be before the end of this year).

11. Update on the progress of the ultra-high-strength concrete research project with the Deakin University (probably more of a 6 to 12 month project, however, a breakthrough announcement would not surprise!). If the overall goal of eliminating just about all steel reinforcement using EdenCrete is achieved this will have huge implications not only for EdenCrete, but also for the concrete and steel reinforcement industries.

12. Update on the progress of EdenPlast (could come at any time and a breakthrough announcement would not surprise!). If there is a major breakthrough here, this will have huge implications for the EDE SP!

Best regards and as always everything is IMHO and please DYOR!

MB

[MarkyBoy49]

Hi woody,

Here you go:

31.12.2016 = .50
31.12.2017 = 1.00
31.12.2018 = 2.00
31.12.2019 = 3.50
31.12.2020 = 5.00


The above EDE SP forecasts are based entirely on the sales figures outlined in the EDE “Investor Presentation” that was announced on September 1st. The P/E ratio I have used is 15, which is realistic in this industry sector. The US$/AUD exchange rate is set at 1.3000, which is of course subject to daily fluctuations.

These SP figures do not include any sales from EdenPlast, which are quite likely to arise in 12 to 24 months time.

These figures also do not take into account the effect of a takeover or investment by a major private or corporate investor.

As always, everything in this post is my own personal opinion and I urge everybody to do their own research.

Best regards!

MB

[Woody222]

Hi there MB
Thank you for your reply. Look forward to more news.

I was wondering if you would be able to post on this forum your last prediction you posted on Hot Copper of the milestones coming up as well as predicted share price.
I certainly believe it will give everyone the HUGE potential of this company.

Thank you

[Greenhorizon1]

Hi,
VMP, agreed, have increased my offer, talking pennies when we look at the potential future pounds.

[Greenhorizon1]

Hi MB,
Understood. A true gentleman, appreciate you taking the time to reply.

[MarkyBoy49]

Hi vmp, greenhorizon and woody,

meeting went very well. Can't say anthing else I'm afraid.

Will keep you posted on further dvelopments (if I can?).

Best regards!

MB

[vmp1]

Hi greenhorizon, let's not forget, every day's a new opportunity! All the best.
Regards
V

[vmp1]

Hi s68 and 1trend, great to find you here. I'm pretty sure there are substantially more retail investors in the US than Australia looking for opportunities like Edencrete to include in their portfolio. Not to mention fund managers as potential investors. Hopefully many will start looking into this company considering the manufacturing plants being built now, and yet to be built are in their backyard.

B regards
V

[1trend]

hi all, had a whisper in a managed funds ear and they seem interested enough that they said they would ring the company to find out more.

[Greenhorizon1]

Good luck VMP, I missed out so far, went a little cheap. :(

[stegz68]

Hello fellow longterm Edener's from downunder ,
Thanks for the tip on this forum,I am sure people will be jumping on eden once they start reading your very informative posts
Now to get the Americans on board Eden train,Regards

[vmp1]

Hi ncrmedia, are you still on EDEYF? just wondering it seems so few have spotted the EDEYF train in the USA. Agree with you seeing the immense future of this company. Regards

[vmp1]

Hi Woody, agreed. I'm actually surprised that EDEYF Edencrete seems still an unknown phenomenon in the US. But given my own inattention until 5 months ago, I can't blame anyone. As you said, we welcome the idea that more retail investors get in at these price levels, and before major institutions jump in, potentially driving the SP to significantly rise.

Regards,
V

[vmp1]

Hi greenhorizon, I'm also intent in doing the same. I had shares in Tasman, eden's parent company, but I missed out on EDEYF when it was below 10 cents. The current price is still at a level where I can acquire a decent share relative to my personal portfolio.

Regards,
Vmp

[vmp1]

Hi MB, thanks for the heads up. I have informed my cousin who is based in San Francisco as well about Edencrete and he immediately looked it up while in conversation, but needs to look into it in more detail. I'm pretty sure more investors like my cousin will be amazed at the potential of EDEYF in the short, medium, and long term, considering:
1) the field trials by GDOT (Georgia Dept of Transport) have been very successful and GDOT has advised EDen that it will identify certain projects that specify the use of Edencrete in tenders, this is a major endorsement for the product,
2) top notch sales team have been hired, two of them from very reputable companies like BASF and SIKA. That these senior and very experienced sales executives have moved to Eden, a start up in admixture industry, speaks volume,
3) some 9 major concrete companies have been given samples in recent months and agreed to do their own testing, and strong interest is expected from these gauging from GDOT's acceptance of Edencrete,
4) Edencrete can save America an enormous sum in its multi billion dollar Infrastructure budget (regardless of who wins the election between Trump and Clinton) potentially 40-45% based on scenarios tested in field trials,
5) Colorado plant expansion, with 2.2m gallon capacity, expected to be completed in early 2017.
6) Eden is expected to accelerate the construction of its base/ major manufacturing facility in Augusta, following the state's grant worth $24.7m in land and tax incentives.

At the moment, Eden is an excellent value and I really want to accumulate more as the current price in my view won't last very long.

All, please do your own usual research. These are my opinion based on reading the investor presentations such as the update from MB.

All the best, regards.
vmp

[Greenhorizon1]

Hi Woody, Agree totally mate, we are all sailing on the same boat, the more info we can share the better for us all. The Hotcopper forum on EDE provides a tremendous insight into this amazing Company. Our very own Markyboy49 being one of Hotcoppers leading posters.
I would certainly encourage our U.S friends to join hotcopper as well.

[Woody222]

Hi MB, VMP and Greenhorizon. This is a great idea of informing people of USA about this fantastic product so they can also be wealthy in the not too distant future.

MB I also would love to here about the outcome of your meeting on Thursday.

Best Regards to you all

[Greenhorizon1]

Hi MB & VMP, Great posts as usual. Be interested to also know the outcome of Thursdays meeting if you would not mind MB? Jumping in tonight (Spain time) hoping to pick up a few more.

[MarkyBoy49]

Hi to you all,

this is the latest big news from Eden Energy regarding recent developments with their breakthrough Carbon Nanotube product "EdenCrete".


AUSTRALIAN SECURITIES EXCHANGE ANNOUNCEMENT
15 September 2016
EDEN PLACES $15M MOSTLY WITH 4 AUSTRALIAN INSTITUTIONS

HIGHLIGHTS

• Eden places $15million @ 18c via Bell Potter

• Over $13 million taken by 4 Australian institutions

• Proceeds deliver Eden the financial capability to accelerate
development of the large-scale Georgia US- based EdenCreteTM
production facility, significantly de-risking this milestone project.


DETAILS

Australian carbon nanotube technologist, Eden Energy Limited (“Eden” or “the Company”) (ASX:EDE) is pleased to announce that the Company has agreed to a two-tranche placement to Australian institutional and sophisticated investors, of 83,333,333 ordinary shares at an issue price
of 18 cents per share, to raise A$15 million (before the costs of the issue). It is intended the proceeds will be employed to accelerate the development in 2017 / 2018 of the planned large-scale EdenCreteTM production facility in the US State of Georgia and to also provide any additional working capital as required.

Over A$13 million of the total amount raised is being placed to four Australian institutional investors. The placement was arranged by Bell Potter Securities Limited.

50 million shares will be issued immediately as the first tranche of the placement, under the Directors’ 15% placement capacity to raise an initial A$9 million. The balance of 33,333,333 shares (to raise a further A$6 million) will be issued as a second tranche subject to approval by shareholders at a general meeting scheduled to be held on or around 28 October 2016.

EdenCreteTM, a carbon-nanotube enriched concrete additive developed by Eden, has undergone highly successful trials in the US and commercial sales have now commenced. As a result, EdenCrete has attracted strong support from the Georgia state and local governments in the form of a
combined US$24.7million financial incentive package to establish a plant in Augusta, Georgia.

Additionally, EdenCreteTM which has been approved for use by the Georgia Department of Transportation (“GDOT”) in its 24 hour concrete repair mix, is proposed to be used by GDOT for several forthcoming state funded highway repair projects to achieve high performance, cost effective outcomes.

The Directors of Eden resolved to undertake this capital raising at the present time because it significantly de-risks the US EdenCreteTM project in that:

• The placement will enable Eden to fast track the initial development of the proposed large scale EdenCreteTM production facility in Georgia in 2017/ 2018 to meet the anticipated demand, regardless of possible major fluctuations and upheavals in the global financial
markets; and

• It also ensures Eden has sufficient funds immediately available to continue expanding its newly formed team of highly successful and experienced sales people, a move anticipated to significantly increase the volume of EdenCreteTM sales over the next year.


Very best regards to you all!

MB

[MarkyBoy49]

Hi vmp,

I have a meeting on Thursday afternoon here in Germany which could turn out to be very interesting. I will keep you posted.

Best regards!

MB

[vmp1]

Hi from down under, I'll share this forum to the Aussie folks if you don't mind. You can also visit hotcopper.com.au to see some interesting discussions of the future of Eden energy. Cheers

[Sharktreatment]

What is wrong with financing , is it toxic or dilutive?
Is this thing. Headed to .o7 or.36?

Dont want concrete shoes

[nrcmedia]

have to think twice about recent financing...that creates some short term issues.

[nrcmedia]

Closed at .25 today will a little volume....expecting this to be close to a buck before it gets noticed in the US. Just shows how little research in general people are willing to do.

In this case I did all the research...and brought it to the board when it was moving into full throttle on the ASX and barely awake on the OTC. If anyone thinks that the replacement of steel in roadbeds by much cheaper and less labor intensive nano parts is a good idea...then you should get on the Eden train before it leaves the station.

A friend of mine is a concrete foundation guy who just laid a 100 foot driveway using this new nano unit and said the results were better than he had expected.

[nrcmedia]

the bid is up to .20 now. Don't worry about the non volume. This is traded in Canada and Australia. Still spends $....big ...big news coming...

[nrcmedia]

well...this baby is starting to setup for a spring loaded runup. Tonight...in Australia it is running about .30 AUS. translated about .22 our time. Stay tuned on this one... ;0)

[nrcmedia]

That's an interesting post King....I assume you are giving it a grade :)

I am in this one full bore....no one outside Australia (other than some workers and bureaucrats in Georgia) and of course myself know much about this company. Their nanotube technology for reinforcement of concrete in roadbeds without the use of steel will be a HUGE deal with the US infrastructure rebuild. Be patient and this one will make you some serious cash.

I am in at an average of .15 per share