W2H2 CAN BE THE PERFECT SOLUTION CONVERTING COAL POWER PLANTS RUNS ON WATER AT LOW COST, NO STORAGE, AND NO POLLUTION.
WPP ENERGY and its team of inventors, scientists and engineers has developed the W2H2 MAX Hydrogen Generator a new way to split water into hydrogen by a patented four stages Thermo-Plasma that converts mass volume of water into hydrogen mostly for coal fired power plants to avoid the use of Coal replaced by water only at a very low cost compare to existing technologies, no storage required it works as a direct injection to the chambers solving most critical problems that scientists was dreaming to achieve for the last decades to commercialise the Hydrogen for the power industry as an affordable, safer, and as the greenest and cleanest source of energy and we are talking about water that as unlimited source of fuel easy to locate anywhere cutting down the cost of operation, avoiding the CO2 carbon emissions as an additional revenues on Carbon Credits, and help reduce the global warming.
40.8% COAL GLOBAL CONSUMPTION MUST BE REDUCED
In 2014, the share of world energy consumption for electricity generation by source was coal at 40.8%, natural gas at 21.6%, nuclear at 10.6%, hydro at 16.4%, other sources (solar, wind, geothermal, biomass, etc.) at 6.3% and oil at 4.3%. Coal and natural gas were the most used energy fuels for generating electricity.
COAL PLANTS GENERATES 300 BILLION TONS OF CO2 EMISSIONS
The Coal fired power plants spew 300 billions of tons of climate-changing CO2 into the atmosphere each year, and continue to be built across the globe. Coal-fired power plants are the largest contributors to the atmospheric CO2 concentrations, which last year reached 400 parts per million (ppm) for the first time in human history — up from 280 ppm in pre-industrial times.
W2H2 WOULD BE THE PERFECT SOLUTION CONVERTING COAL FIRED POWER PLANTS TO RUN ON 100% WATER
Each W2H2 as a modular unit that generates 16,000Nm3 of Hydrogen Gas per hour and can be combines with with five additional units to generate 96,000Nm3 to replace a 600MWh Coal or Natural Gas power plants using just water as an input to each W2H2 unit and just 3% power from the overall production to run the entire plant as the lowest cost compare to Coal, or Natural Gas.
Each W2H2 Unit consume just 12Nm3 of fresh water to generate 16,000Nm3 of Hydrogen Gas in order to run a 600MWh it will require 6 W2H2 units that generates together 96,000Nm3 of Hydrogen Gas per hour so the overall water and power consumption for the entire plant would be 72Nm3 of water per hour and 3% from the produced power about 18MWh that results into net 582MWh
Other savings of using W2H2 MAX unit are by avoiding the cost of Coal shipping and ground transportation, cost of storage for a minimum one month supply, and converting the entire plant into clean energy gaining additional revenues on Carbon Credit and best of all turning the entire plant becomes economically viable.
For more information about the W2H2 technology please visit us at: www.wppenergy.con or send us an email to: info@wppenergy.com
