Tuesday, August 14, 2018 11:30:55 AM
KELOWNA, BC / ACCESSWIRE / August 13, 2018 / Enertopia Corporation (OTCQB: ENRT) on the OTCQB and (CSE: TOP) on the CSE (the "Company" or "Enertopia") is pleased to announce the start of the second phase of bench-scale test work on lithium bearing clays from Clayton Valley, NV. The first phase has established that a synthetic brine high in lithium and low in magnesium can be produced by leaching at an elevated pH.
The testing and sampling program has been designed by Dr. John Thomas, B.Sc, M.Sc, Ph.D. chemical engineering will consist of multi-phase program that will comprise solution testing through various ion exchange resins, reverse osmosis membranes that are standard in the industry to refine, concentrate and polish our lithium brines for conversion to Lithium carbonate or hydroxide. The first phase baseline has been completed and the brine testing results are below.
The synthetic lithium brine samples were created using distilled water at room temperature and adding either CaOH or NaOH at maintained pH levels of 9, 10 and 11 for 2 hours. The ratio of 100g source material and 300ml distilled water at 20 degrees Celsius were used for this phase one testing program. It should be noted that the quantity of lime or sodium hydroxide used was small.
Takeaway's from first phase of testing:
Testing has shown that an alkaline leach of Clayton Valley source rock produces synthetic brines with much lower impurities than synthetic brines produced by acid leach of the same rock.
Testing also showed that we can produce a lithium brine solution at a far lower cost by using either a CaOH or NaOH caustic solution versus H2SO4.
Note sample TOP 3 was created using 130g source rock and 300 ml solution.*
The next phase of testing will consist of evaluating the process design for producing various lithium salts using Ion Exchange media.
Dr. John Thomas, Technical Advisor of Enertopia Corporation, stated: "Technical work using the synthetic Lithium's brine samples from Clayton Valley, NV is progressing well. The test work creating a Lithium brine with industry-leading low impurities is a big milestone toward developing the potential production of lithium salts and concentrate. We are looking forward to ongoing positive results of this work as we move forward.
NEXT STEPS:
The Company continues to work aggressively to unlock the value of the lithium-bearing rock at and near the surface at the Clayton Valley lithium project. The lithium-bearing rock is contained in an uplifted block of sediments along the eastern flank of Clayton Valley, NV. Recently Cypress Development released a 43-101 indicating that they had outlined a large multi-million tonne Li2CO3 resource in similar sediments adjacent to our western project boundary. We believe this is a strong indication that there is resource potential on our project as well. The Company is reviewing several submitted 3rd party drilling quotes. The Company intends to conduct its first drill program prior to yearend and establish a near surface resource to be used for future pilot plant resource material.
"Enertopia looks forward to providing testing updates as each testing phase is completed and the next phase is undertaken. In parallel with the brine testing process, the Company will provide drilling program updates and our ongoing project work at our 100% owned Clayton Valley, NV, Lithium project, as well as continuing due diligence in the technology and mineral sectors. Modern technology is revolutionizing ways to mine and protect our environment," stated President and CEO Robert McAllister
QA/QC of the synthetic brine assays was carried out by ALS Geochemistry of Vancouver, BC. Head grade rock analysis was completed using ME-ICP61, with synthetic brine analysis completed by using ME-MS14b, ME-ICP14, ME-ICP15.
The Qualified person:
The technical data in this news release have been reviewed by Douglas Wood, P.Geol a qualified person under the terms of NI 43-101.
Read more: http://www.digitaljournal.com/pr/3894710#ixzz5OAPRE7Nh
Recent ENRT News
- Form 10-K/A - Annual report [Section 13 and 15(d), not S-K Item 405]: [Amend] • Edgar (US Regulatory) • 02/01/2024 06:21:29 PM
- Form 8-K - Current report • Edgar (US Regulatory) • 01/19/2024 03:41:50 PM
- Form 10-Q - Quarterly report [Sections 13 or 15(d)] • Edgar (US Regulatory) • 01/11/2024 08:38:00 PM
- Form 10-K - Annual report [Section 13 and 15(d), not S-K Item 405] • Edgar (US Regulatory) • 11/29/2023 06:24:06 PM
- Form 8-K - Current report • Edgar (US Regulatory) • 11/28/2023 02:01:49 PM
- Form 8-K - Current report • Edgar (US Regulatory) • 11/21/2023 02:02:46 PM
- Form 8-K - Current report • Edgar (US Regulatory) • 11/02/2023 09:09:35 PM
- Form 8-K - Current report • Edgar (US Regulatory) • 09/19/2023 10:06:05 AM
- Form 8-K - Current report • Edgar (US Regulatory) • 09/12/2023 01:06:04 PM
- Form 10-Q - Quarterly report [Sections 13 or 15(d)] • Edgar (US Regulatory) • 07/12/2023 08:29:06 PM
- Form 8-K - Current report • Edgar (US Regulatory) • 06/28/2023 09:24:54 PM
- MWRK Positions For High Growth In $3.5 Trillion Metaverse Market Popularized By META • InvestorsHub NewsWire • 05/03/2023 04:24:58 PM
Axis Technologies Group and Carbonis Forge Ahead with New Digital Carbon Credit Technology • AXTG • Apr 24, 2024 3:00 AM
North Bay Resources Announces Successful Equipment Test at Bishop Gold Mill, Inyo County, California • NBRI • Apr 23, 2024 9:41 AM
Epazz, Inc.: CryObo, Inc. solar Bitcoin operations will issue tokens • EPAZ • Apr 23, 2024 9:20 AM
Avant Technologies Launches Advanced AI Supercomputing Network and Expansive Data Solutions • AVAI • Apr 23, 2024 8:00 AM
BestGrowthStocks.com Issues Comprehensive Analysis of Triller Merger with AGBA Group Holding Limited • AGBA • Apr 22, 2024 1:00 PM
Cannabix Technologies to Present Marijuana Breathalyzer Technology at International Association for Chemical Testing (IACT) Conference in California • BLO • Apr 22, 2024 8:49 AM