Resin Systems (fka RSSYF)

[Renee]

RSSYF: Finra deleted symbol.

http://www.otcbb.com/asp/dailylist_detail.asp?d=01/30/2014&mkt_ctg=OTCBB

[1toke]

anyone still in this stock i recently bought more and this is a highly volatile stock with huge percentage gains hopefully i will come up off this.

[ErnieBilco]

Nice buys end of day.

[ErnieBilco]

The ask is moving around from .05 to .10

[joee5]

done

[joee5]

RS Technologies Repays $25 Million Principal Amount of 8.5% Unsecured Debentures Due October 7, 2010 and Accrued and Unpaid Inte
Date : 10/07/2010 @ 5:52PM
Source : PR Newswire
Stock : RS Technologies Inc. Ordinary Shares (Canada) (RSSYF)
Quote : 0.019 0.0 (0.00%) @ 4:43PM


RS Technologies Repays $25 Million Principal Amount of 8.5% Unsecured Debentures Due October 7, 2010 and Accrued and Unpaid Inte
RS Technologies Inc. Ordinary Shares (Canada) (USOTC:RSSYF)
Intraday Stock Chart

Today : Friday 8 October 2010
Click Here for more RS Technologies Inc. Ordinary Shares (Canada) Charts.

RS Technologies Inc. ("RS") (RS - TSX), a technology innovator and manufacturer of advanced composite products for infrastructure markets, announced that it has issued 1,136,529,575 common shares of RS today to satisfy its obligation to repay all of the $25 million principal amount of 8.5% unsecured convertible debentures of RS due on October 7, 2010 (the "Unsecured Debentures") and the accrued and unpaid interest thereon. As required by the TSX, RS obtained approval of the common shares issued in respect of the satisfaction of the principal amount of the Unsecured Debentures by way of written consent of shareholders (excluding directors of RS who, directly or indirectly, owned or controlled, Unsecured Debentures) holding a majority of the common shares of record as at August 17, 2010. RS has approximately 1.36 billion common shares issued and outstanding following the share issuance.

[Chance To See]

Below is a post containing the latest research report from John Chu. The Yahoo board isn’t very active either, but there are a few people hanging around.

As you probably know, in the past when the stock price has gone steadily downward like it has over the past couple of weeks it usually means something dreadful has happened that small shareholders know nothing about, like the disaster with GCM. Yet John Chu’s report from April 7th was mildly positive, implying that Q1 2010 was better than Q4 (let’s hope so). That was a week or so before the stock price started tanking.

I re-bought a small position a few months ago just to keep it on the radar and also on the off chance that some big company would snap it up and get the best utility poles in the world. But I really don’t know at this point whether they will make it.

Q4 at $3.2 million in revenue would have been excellent a couple of years ago, but I’m beginning to doubt that cells 1 and 2 can get anywhere near the $12 million per quarter output we have been promised for so long. I don’t’ know what to expect if they can’t reach break-even without the planned four new production cells, which would cost something like $40 million. If the new cells are a real design improvement, then maybe some investors will step up once again.

Chu’s comment about raw material sourcing improvements is interesting, as I think the raw materials may be the main cost component of the poles. I remember Paul G once saying that labor was only about 10% of the cost.

The rollers could be a big help, but where are they?

Anyway, as to whether it is a sinking ship, I don’t know. [edit: But the Q3 and Q4 results were the first time that I really began to seriously question whether they will make it.]

YAHOO POST:

http://messages.finance.yahoo.com/Stocks_%28A_to_Z%29/Stocks_R/threadview?m=te&bn=74477&tid=287&mid=287&tof=3&frt=1#287

John Chu's Latest Report 27-Apr-10 03:55 pm
Below is the most recent report from John Chu at Mackie Research (from April 7th).

http://www.mackieresearch.com/index.php

My Comments:
-- I’m not sure that “tweak” is the right word to use concerning getting the Tilbury plant up to speed.
-- Chu also says, “…YTD production utilization has improved over Q4/09.” I assume that means during Q1 2010, which sounds positive. I hope it improved a lot.
-- Also, “Management indicated to us that it is comfortable it will meet its shipment schedule [of $100 million to HD Supply] of mid-2012.” I’m afraid I just don’t believe Paul any more, but let's hope it's true.

++++++++++++++++++++

APRIL 7TH REPORT

EVENT – Q4 Results
The company reported Q4 results recently.

OPINION – Positive. Operations Continue to Improve. On Target to Complete HD Supply Shipments by Mid-2012

Q4 results summary: EPS for the quarter was a loss of $(0.04) driven by sales of $3.2 million. Year-over-year comparisons are not applicable in this case given the resumption of direct manufacturing by the company for 2009 (as opposed to the company outsourcing in 2008 and the subsequent issues with its manufacturing outsourcer). Gross margins were negative for the quarter as the manufacturing plant was operating below optimal production levels. An inventory write-down of $1 million was incurred and future write-downs should decline and eventually be eliminated once optimal production levels are achieved. Lastly, the company had $3 million of cash on the balance sheet at the end of Q4/09 and recently announced (March 22) the initial completion of its equity offering for the amount of $7.4 million at $0.33/share. The company also announced an extension to a $7 million credit facility originally set to expire March 31, 2010, which has been now pushed back to October 31, 2010.

Operational update: The Tilbury plant continues to ramp up production and the process is still being tweaked. More importantly, YTD production utilization has improved over Q4/09. As previously stated by the company, it expects to complete shipments of $100 million in product to HD Supply by mid-2012. With the Tilbury plant having production capacity of upwards to ~$50 million (two production lines with capacity of ~$20-$25 million each), the plant will need to ramp up to full production over the next several months to reach this goal. Management indicated to us that it is comfortable it will meet its shipment schedule of mid-2012.

Cost-cutting: As the production lines ramp up, the company expects margins to improve. In addition, the company is looking to source raw materials (e.g. resin components) to help reduce costs. The company has already been able to source a resin component, which should reduce costs for that component by 15%. The company hopes to source more cheap raw material components going forward

[pm071]

Anyone still in this?......Sure seems to be dead? I still have 10,000 shares....should have some long ago.

Any insight for near future or is it a sinking ship?

[Chance To See]

Two Good Articles

The first article is from January and is on Resin’s site.

http://www.grouprsi.com/documents/GlobeandMail_14Jan2010_EntrepreneurTriesToReinventUtilityPole.pdf

-- It contains the first comments I’ve seen from the wood pole competitor, Stella-Jones. The company’s president apparently doesn’t feel threatened, but did acknowledge that the RS poles make sense for rough terrain areas.
-- I didn’t like this bravado from Paul G re the Hydro One deal, “With this deal, ‘we're going to shoot the lights out,’ says Mr. Giannelia…” Lets see the company even make (let alone sell) a full complement of poles from the two production cells before we start crowing.

The second article is from March 1 in Transmission & Distribution World and was found by a Yahoo poster.

http://tdworld.com/overhead_distribution/kentucky-coop-fiberglass-poles-20100301/index1.html

-- It is written by two employees of Western Kentucky Rural Electric Cooperative, who should join RS as salesmen.
-- I’m still a bit uncomfortable with that lifetime replacement guarantee, but it only covers “modules that fail as a result of the physical loads imposed by ice, snow, wind or lightning strikes” and so far the poles sure seem to be able to handle those.

[Chance To See]

You gotta love this.

"If we could afford to replace all our poles tomorrow with the RStandard pole, we would do it...."



Composite Poles Stand Up to Texas Tornado

Oct 13, 2009 07:10:00 (ET)
CALGARY, Oct 13, 2009 /PRNewswire-FirstCall via COMTEX/ --

RStandard(R) Poles Continue to Perform Where Other Poles Failed

Resin Systems Inc. ("RS") (RS - TSX), a technology innovator and manufacturer of advanced composite products for infrastructure markets, announces its RStandard(R) poles have withstood an important field test in Lajitas, Texas - a direct hit by a tornado. In spite of high winds and swirling debris, the RStandard poles demonstrated their worth and capability in hardening the Rio Grande Electric Cooperative, Inc. ("RGEC") grid. RGEC maintains over 9,400 miles of distribution line and 143 miles of transmission line in west Texas and southern New Mexico comprising an area over 27,000 square miles.

Dan Laws, general manager and chief executive officer for RGEC, stated, "A tornado touched down in Lajitas on October 7th. Several homes in the area had roofs ripped completely off. We had padmounted transformers and junction boxes swept completely off their pads! We lost eight 40 ft. Class 3 wooden poles on our brand new Study Butte-Lajitas 34.5kV 3O line. These were snapped off like toothpicks two feet above the ground. RGEC Operations reported that the RStandard composite poles that we installed in this area 'did not budge at all.' "

Even before the tornado struck, RGEC was already considering the purchase of additional RStandard poles for several projects because of their favorable previous experience installing RStandard poles. Obviously, the RGEC is now even more impressed with RStandard composite pole technology.

"If we could afford to replace all our poles tomorrow with the RStandard pole, we would do it given the increased strength, durability and reliability that we believe these poles would provide." stated Larry T. Powell, director of engineering for RGEC.

Paul Giannelia, president and chief executive officer of RS, stated, "The fact that our poles withstood this tornado proves our RStandard poles are the most reliable and robust pole technology on the market. Combining the strength of our poles with our industry-leading lifetime guarantee and 41-year warranty gives utilities like RGEC confidence they are providing a higher level of reliable electric service to their customers."

About Rio Grande Electric Cooperative, Inc.

Rio Grande Electric Cooperative, Inc., headquartered in Brackettville, TX, is a member-owned, non-profit electric cooperative, serving rural residents in eighteen counties in Texas, and two counties in New Mexico. With offices in Brackettville, Carrizo Springs, El Paso, Fort Stockton, Dell City, and Marfa, RGEC employs over 130 rural residents. RGEC has a strong history of community service and promotion of sustainable rural development throughout its 27,000 square mile service territory. RGEC also maintains the electrical distribution system for Ft. Bliss, El Paso, TX, the nation's largest Army Air Artillery Base. In addition, RGEC was just awarded the privatization contract for the electric distribution infrastructure at Laughlin Air Force Base in Del Rio, Texas. For more information on Rio Grande Electric Cooperative, call 1-800-749-1509, or visit the web site at www.riogrande.coop .

About RS

RS is a technology innovator that develops advanced composite material products for infrastructure markets. The composite products manufactured using the Company's proprietary resins and processes are typically lighter, more durable and longer-lasting than competing products made from the traditional building blocks of wood, steel or concrete. RS's flagship product is its award-winning RStandard(R) composite pole. The pole is used as transmission and distribution poles to carry electric grids and as communication structures for various uses including wireless networks and microwave communications systems.

For the latest on RS's developments, go to the company's website at www.grouprsi.com .

"RStandard" is a registered trademark of RS SOURCE Resin Systems Inc.

[Chance To See]

While it doesn’t sound like ActewAGL will be replacing all 28,000 poles next week, it does sound like they will use RStandard poles when they do replace them.


RS Poles Gain Australian Patent and Market Acceptance

9:10 am EDT, Tuesday October 6, 2009

RStandard® Composite Poles Provide Unique Solution for Australia's ActewAGL

CALGARY, Oct. 6 /PRNewswire-FirstCall/ - Resin Systems Inc. ("RS") (RS - TSX), a technology innovator and manufacturer of advanced composite products for infrastructure markets, announces it has secured an Australian patent for its "method of modular pole construction and modular pole assembly." This patent is in addition to RS's previously awarded Chinese and Canadian patents and supports the company's broader commercial strategy of protecting its unique technology in international markets.

The importance of the Australian patent approval is underscored by RS's fourth shipment this year of a full freight container (74 RStandard® composite poles) to its Australian distributor, Armor Utility Structures. As with the prior RS pole shipments, the poles are destined for ActewAGL, the utility serving Canberra. ActewAGL is utilizing RStandard poles to replace degraded wood distribution poles located in difficult to access locations, such as homeowner backyards and alleys.

ActewAGL acting general manager networks division, Stephen Devlin, said, "ActewAGL has approximately 28,000 low voltage poles located within residential and commercial backyards within the Australian Capital Territory (ACT). This is a legacy of Canberra's original planning days. The RStandard poles are light enough for line crews to hand carry and erect the poles without the need for heavy lift cranes which cannot access the installation sites. Restricted access to backyards does not allow for the installation of standard wooden, concrete, or steel single piece poles. The only multi-piece poles available for installation with a lifting beam are composite and steel. The advantages of composite poles compared with steel poles are lighter weight, non-conductive, non-corrosive and less expensive."

In addition, the expected service life of RStandard poles is greater than 80 years, creating the lowest ownership cost of any pole on the market.

Hugh Oldfield, chief executive officer of Armor Utility Structures, stated, "The RS composite utility pole has had an excellent reception in the Australian market. Across the country, major utilities have piloted the RS composite pole in a wide variety of geographical locations to ensure the industry as a whole can experience and realize the benefits of RStandard poles. Utilities have been placing follow up orders to take advantage of installation efficiencies and life cycle cost savings identified during these trials."

Paul Giannelia, president and chief executive officer of RS, is pleased to see the demand for RStandard composite poles growing around the world, stating "It is quite satisfying to see the enthusiasm our customers have for our RStandard products. They recognize the value proposition of a strong, task flexible, maintenance-free pole that is easy to assemble and quick to install. We are all pleased to see the list of satisfied and repeat customers growing."

About ActewAGL
ActewAGL, which is located in Canberra, Australia, is a multi-utility that provides a range of services including electricity, natural gas, green energy, water and wastewater. For more information, visit www.actewagl.com.au.

About Armor Utility Structures
Armor Utility Structures is a wholly owned subsidiary of Armor Australia Pty, Limited ("Armor"), which is a composite materials engineering and manufacturing company specializing in composite moulding armour panel applications. Armor works within a variety of industries providing engineered composite solutions from design and prototyping through to providing fully designed and operational production cells. Since 2004, Armor has been engaged by the Australian electrical energy transmission and distribution industry to investigate the use of fibre composites to meet the industry's growing need for replacement of its utility pole structures. Armor is located in Sydney, Australia.

About RS
RS is a technology innovator that develops advanced composite material products for infrastructure markets. The composite products manufactured using the company's proprietary resins and processes are typically lighter, more durable and longer-lasting than competing products made from the traditional building blocks of wood, steel or concrete. RS's flagship product is its award-winning RStandard® composite pole. The pole is used as transmission and distribution poles to carry electric grids and as communication structures for various uses including wireless networks and microwave communications systems.

For the latest on RS's developments, go to the company's website at www.grouprsi.com.

"RStandard" is a registered trademark of RS

[VTP]

I remember when this one was over a dollar...

[VTP]

Time to put this one back on the watchlist....

[farmerdave]

Resin Systems Completes $10 Million Equity Offering
Friday July 11, 1:42 pm ET

CALGARY, July 11 /PRNewswire-FirstCall/ - Resin Systems Inc. ("RS") (RS - TSX / RSSYF - OTCBB), a composite products innovation company, today announced the closing of its previously announced private placement. At closing, 9,615,385 common shares (the "Common Shares") of RS were issued at a price of $1.04 per share for gross proceeds of $10.0 million. A director of RS acquired 2,672,000 Common Shares pursuant to the private placement.

ADVERTISEMENT
RS intends to use the proceeds of the offering for general corporate purposes.

All of the Common Shares issued by RS pursuant to the private placement are subject to a hold period until November 12, 2008.

About RS

[foodcourt1]

There is a webcast today from RSSYF.

[Golden Cross]

Looks to be bouncing...GLTA

[xZx]

anyone from RB check this board? i'm ready to get out off that site for good. ihub much better.

[PowerPole]

If you're looking to discuss RSSYF...

Go here: http://ragingbull.lycos.com/mboard/boards.cgi?board=RSSYF&read=439

This Raging Bull Board has a LOT more action...

Good Luck To ALL ;^)

[PowerPole]

sintwang...I'm not new to RSSYF...

In fact, I brought it to the CPTC--IHUB Boards attention for the first time on 2/1/05 while researching competition for Composite Poles for CPTC...

http://www.investorshub.com/boards/read_msg.asp?message_id=5291422

I liked what I saw then, and took a position at that time...

What I especially like after reading the updated Cohen Report is:

http://www.cohenresearch.com/reports/rssyf_08-05-05.pdf

1) EPS Estimates show they will go profitable in the fourth quarter this year on a Q/Q basis, and next year on a Y/Y basis...That will bring in a lot of new investors all by itself...

2) From the Cohen Report: "The second application the Company is involved in is the supply of it's Version resin to other composite manufacturers of soffit architectural components for the US housing industry. The Company expects further orders for additional resin sales throughout 2005 and beyond for assorted construction, industrial and infrastructure applications".--So they not only manufacture their own products, but their Version resin is so good, that they can sell it Worldwide...

3) Under the section of "Environmental Concerns"..."The Company states their RStandard poles are manufactured using a zero VOC resin", and at the bottom "Version resin has no quotas on use as it already meets all EPA requirements"....This gives this Company a leading edge in the fact it will not have to battle the Environmentalists as to where their poles can be installed, or where their resin can be used...

4) I especially like the fact that they have a 5 person Board of Directors, and with the addition of a new CFO recently, have a 7 person Executive Management Team...
Which is the way it's supposed to be...
Not like the way Composite Technology Corp's. power is concentrated in basically one or two people, which is a good explanation of why they can't seem to get anything done...

5) It appears they are very good at closing deals internationally and domestically, and their poles are fully tested and already part of the "live grid" in many locations around the world: Europe, Canada, USA, New Zealand, Australia, and hopefully soon in CHINA...

6) I like the fact that they have already achieved "ISO 9001-2000 Certification" status, as many companies require this certification in order to be able to do business with them...

I could go on and on about all the good things I am finding doing additional DD on this Company, and I probably will at a later time...But now it's time to watch some FOOTBALL!!!

And it's really not fair to keep comparing CPTC to this Company, because it's obvious to me that RSI is a Company that has it's chit together and knows how to get things done...and I'm beginning to wonder if CPTC will still be around after Octeber 12th (Bankruptcy Confirmation Hearing), or in a year or two with their current and ineffective management...JMO

As a matter of fact, if CPTC does not have an Awesome PR by Tuesday's open, we will be lightening up on it, and putting that money in here on every pullback, and every breakout of resistance...

Good Luck To ALL ;^)

[mrgreen]

News!!!!!!!!!!!!!The momo for revenues and stock appreciation has begun, resin systems is gonna be hot hot hot in 2005/06.....

Resin rolls into multimillion-dollar Version order


2005-04-26 10:13 ET - News Release

Mr. Greg Pendura reports

RESIN SYSTEMS ANNOUNCES INITIAL ORDER FOR THE APPLICATION OF ITS VERSION(TM) RESIN IN THE INDUSTRIAL SECTOR

Resin Systems Inc., through its operating division, RS Technologies, has received a multiyear, multimillion-dollar order from Inline Fiberglass Ltd. (IFL) of Toronto, Ont., to supply Version resin for the manufacture of industrial conveyor system rollers. IFL will use a pultrusion process to manufacture the rollers, applying technologies and dies jointly developed by IFL and RS. Regular full container shipments of Version resin are scheduled to commence in early July, 2005, and continue for a minimum of three years. The frequency of shipments will be a minimum of one full container of Version resin per month and will increase to meet production and schedule requirements.

Large industrial conveyor systems are commonplace in open pit mining operations or where large volumes of earth and/or rock are moved great distances. Historically, the majority of heavy industrial conveyor rollers have been manufactured with high-quality steel pipe. Management of RS believes that rollers made from its Version resin composite material will gradually replace the steel pipe used in the manufacturing process as end-users will enjoy an immediate and significant reduction in conveyor operating costs as a result of the conversion, including (i) operating cost savings resulting from using less energy to operate the significantly lighter Version resin rollers as compared with steel rollers, and (ii) reduced maintenance cost savings resulting from Version resin being maintenance free and not impacted by the natural elements such as rain, snow, moisture, temperature etc. The conversion from traditional steel rollers is only possible because of the unique superior strength and impact resistance properties of RSI's proprietary Version resin.

The end-user of the composite rollers to be made by IFL is KWB SA Kopalnia Wegla Brunatnegro located in Betchatow, Poland, the largest open pit mine in the European Union. KWB mines in excess of 35 million tonnes of coal annually, all of which is used as a source of energy for an adjacent 4,000-megawatt thermal power plant. KWB is the largest member of a multicoal mine industry group in Poland and is known to be a leader in new mining process applications. Currently, the KWB mine alone operates in excess of 90 kilometres (56 miles) of industrial conveyors which require more than 600,000 rollers. The manufacture of each composite roller requires approximately four kilograms (nine pounds) of Version resin. KWB has initiated a conversion program which will see the existing steel rollers replaced with rollers made from Version resin over the next three-year period. Due to KWB's desire to begin the conversion program immediately, initial manufacturing will commence in IFL's existing facilities in Toronto and will continue in Poland as soon as local facilities are commissioned.

IFL is a major global composite materials pultrusion fabrication company, specializing in thin wall pultrusion manufacturing. IFL is continuing to actively integrate Version resin into its comprehensive range of composite building and industrial products. IFL is headquartered in Toronto, Ont., and provides the global marketplace with composite material products.

[mrgreen]

+ rs [rssyf] resin systems is a stock you must to do your dd on,i see it giving a good % return over the next year, resin systems rssyf and rs.v has the only voc free [styrene/pollution free] resin in the world and is patented,i also like this company because the resin product is the main ingredient used in making plastic or fibreglass products, this is called the composite industry and in north america alone is a 20 billion dollar industry,rs.v and rssyf otc:bb are the symbols, resin ststems has the only voc free patented resin in the world [this means no pollution or styrenes when making any plastic or fibreglass products and resin is the key ingredient in these products] profit margins will be high off of the get go, this product is used in the $20 billion annual pultrusion and composites industry, management is focused and down to earth and has the proper players onboard to get the job done, product is huge, the money is in the bank , check it out do the dd thing,but take a serious look at this investment as there are lots of eyes watching it because of this revolutionary product . Here is some interesting links and headlines with great info out there on rs:

http://www.grouprsi.com/index.aspx
http://www.nvshockey.com/
http://www.capitalideas.com/
http://stockcharts.com/def/servlet/SC.web?c=rs.v
http://www.howardgroupinc.com/clients/rsi/rsi.htm
++rs makes hockey sticks , power poles [big $ coming on this product] and many other neat products with their patented resin as well as selling the raw resin itself.
+++headlines:- Resin Systems Signs Long-term Composite Pole Distribution Agreement
2/17/04
-Resin products to be distributed by Hesco Electric
- EDMONTON, ALBERTA, Mar 25, 2004 (CCNMatthews via COMTEX) --
Resin Systems Inc. (RSI) (RS-TSX Venture / RSSYF - OTCBB) and its operating division, RS Technologies (RS) today announced that its Ontario market distributor Harwell Hesco Electric Supply Company Ltd.('Hesco') has provided RS with an initial order in edw
xcess of $6 million of composite utility poles and cross-arms.
++++t/a for resin systems:
http://stockcharts.com/def/servlet/SC.web?c=rssyf
http://www.stockta.com/cgi-bin/analysis.pl?symb=RS.C&num1=1&cobrand=&mode=stock
http://www.americanbulls.com/StockPage.asp?CompanyTicker=RS&MarketTicker=VSE&Typ=S

[mrgreen]

boom boom.

[mrgreen]

rssyf chart looks ready to explode imho...

[Bad cuda]

NEWS TODAY!!!!!!!

[mrgreen]

here it goes great:


+ rs [rssyf] resin systems is a stock you must to do your dd on,i see it giving a good % return over the next year, resin systems rssyf and rs.v has the only voc free [styrene/pollution free] resin in the world and is patented,i also like this company because the resin product is the main ingredient used in making plastic or fibreglass products, this is called the composite industry and in north america alone is a 20 billion dollar industry,rs.v and rssyf otc:bb are the symbols, resin ststems has the only voc free patented resin in the world [this means no pollution or styrenes when making any plastic or fibreglass products and resin is the key ingredient in these products] profit margins will be high off of the get go, this product is used in the $20 billion annual pultrusion and composites industry, management is focused and down to earth and has the proper players onboard to get the job done, product is huge, the money is in the bank , check it out do the dd thing,but take a serious look at this investment as there are lots of eyes watching it because of this revolutionary product , patent pending on power poles that will blow that industry away, this is where alot of the excitement is coming from along with many new products coming imho. Here is some interesting links and headlines with great info out there on rs: http://www.howardgroupinc.com/clients/rsi/rsi.htm
http://www.grouprsi.com/index.aspx
http://www.nvshockey.com/
http://www.capitalideas.com/
http://www.goldencapital.com/
http://www.stockhouse.ca/comp_info.asp?symbol=RS&table=list
http://stockcharts.com/def/servlet/SC.web?c=rssyf

++rs makes hockey sticks , power poles [big $ coming on this product] and many other neat products with their patented resin as well as selling the raw resin itself.
+++headlines:- Resin Systems Signs Long-term Composite Pole Distribution Agreement
2/17/04
-Resin products to be distributed by Hesco Electric
- EDMONTON, ALBERTA, Mar 25, 2004 (CCNMatthews via COMTEX) --
Resin Systems Inc. (RSI) (RS-TSX Venture / RSSYF - OTCBB) and its operating division, RS Technologies (RS) today announced that its Ontario market distributor Harwell Hesco Electric Supply Company Ltd.('Hesco') has provided RS with an initial order in edw
xcess of $6 million of composite utility poles and cross-arms.
++++t/a for resin systems:
http://stockcharts.com/def/servlet/SC.web?c=rssyf

http://www.stockta.com/cgi-bin/analysis.pl?symb=RSSYF&num1=1&cobrand=&mode=stock

[mrgreen]

yep looks like these guys finally got it together, should be a good ride in 2005 for shareholders on this exciting product.

[Bad cuda]

whats up
EP- slow steady grower in the same industry.been watching it since april 04' seems like they are getting their stuff together with new plant being opened,we'll see
Cuda

[Estimated_Prophet]

HOla amigos.

[mrgreen]

gonna be an interesting year for longs of this stock imho farmer.should be a beauty.

[FarmerJoe1803]

$7.5 Mil. financing completed by Resin Systems.

http://www.stockhouse.com/news/news.asp?tick=RS&newsid=2633237

Farmer

[mrgreen]

wow been explosive uptrend in here.go rssyf

[mrgreen]

dd anyone?

[mrgreen]

gonna be a great 2005 for this play imho:


+ rs [rssyf] resin systems is a stock you must to do your dd on,i see it giving a good % return over the next year, resin systems rssyf and rs.v has the only voc free [styrene/pollution free] resin in the world and is patented,i also like this company because the resin product is the main ingredient used in making plastic or fibreglass products, this is called the composite industry and in north america alone is a 20 billion dollar industry,rs.v and rssyf otc:bb are the symbols, resin ststems has the only voc free patented resin in the world [this means no pollution or styrenes when making any plastic or fibreglass products and resin is the key ingredient in these products] profit margins will be high off of the get go, this product is used in the $20 billion annual pultrusion and composites industry, management is focused and down to earth and has the proper players onboard to get the job done, product is huge, the money is in the bank , check it out do the dd thing,but take a serious look at this investment as there are lots of eyes watching it because of this revolutionary product . Here is some interesting links and headlines with great info out there on rs: http://www.howardgroupinc.com/clients/rsi/rsi.htm
http://www.grouprsi.com/index.aspx
http://www.nvshockey.com/
http://www.capitalideas.com/
http://www.goldencapital.com/
http://www.stockhouse.ca/comp_info....l=RS&table=list
http://stockcharts.com/def/servlet/SC.web?c=rs.v

++rs makes hockey sticks , power poles [big $ coming on this product] and many other neat products with their patented resin as well as selling the raw resin itself.
+++headlines:- Resin Systems Signs Long-term Composite Pole Distribution Agreement
2/17/04
-Resin products to be distributed by Hesco Electric
- EDMONTON, ALBERTA, Mar 25, 2004 (CCNMatthews via COMTEX) --
Resin Systems Inc. (RSI) (RS-TSX Venture / RSSYF - OTCBB) and its operating division, RS Technologies (RS) today announced that its Ontario market distributor Harwell Hesco Electric Supply Company Ltd.('Hesco') has provided RS with an initial order in edw
xcess of $6 million of composite utility poles and cross-arms.
++++t/a for resin systems:
http://www.americanbulls.com/StockPage.asp?CompanyTicker=RS&MarketTicker=VSE&Typ=S
http://stockcharts.com/def/servlet/SC.web?c=rs.v
http://www.stockta.com/cgi-bin/analysis.pl?symb=RS.C&num1=1&cobrand=&mode=stock

[mrgreen]

gonna be a great 2005 for this play imho:


+ rs [rssyf] resin systems is a stock you must to do your dd on,i see it giving a good % return over the next year, resin systems rssyf and rs.v has the only voc free [styrene/pollution free] resin in the world and is patented,i also like this company because the resin product is the main ingredient used in making plastic or fibreglass products, this is called the composite industry and in north america alone is a 20 billion dollar industry,rs.v and rssyf otc:bb are the symbols, resin ststems has the only voc free patented resin in the world [this means no pollution or styrenes when making any plastic or fibreglass products and resin is the key ingredient in these products] profit margins will be high off of the get go, this product is used in the $20 billion annual pultrusion and composites industry, management is focused and down to earth and has the proper players onboard to get the job done, product is huge, the money is in the bank , check it out do the dd thing,but take a serious look at this investment as there are lots of eyes watching it because of this revolutionary product . Here is some interesting links and headlines with great info out there on rs: http://www.howardgroupinc.com/clients/rsi/rsi.htm
http://www.grouprsi.com/index.aspx
http://www.nvshockey.com/
http://www.capitalideas.com/
http://www.goldencapital.com/
http://www.stockhouse.ca/comp_info....l=RS&table=list
http://stockcharts.com/def/servlet/SC.web?c=rs.v
http://www.howardgroupinc.com/clien...ental_research_feb04.pdf
++rs makes hockey sticks , power poles [big $ coming on this product] and many other neat products with their patented resin as well as selling the raw resin itself.
+++headlines:- Resin Systems Signs Long-term Composite Pole Distribution Agreement
2/17/04
-Resin products to be distributed by Hesco Electric
- EDMONTON, ALBERTA, Mar 25, 2004 (CCNMatthews via COMTEX) --
Resin Systems Inc. (RSI) (RS-TSX Venture / RSSYF - OTCBB) and its operating division, RS Technologies (RS) today announced that its Ontario market distributor Harwell Hesco Electric Supply Company Ltd.('Hesco') has provided RS with an initial order in edw
xcess of $6 million of composite utility poles and cross-arms.
++++t/a for resin systems:
http://www.americanbulls.com/StockP...ker=RS&MarketTicker=VSE&Typ=S
http://stockcharts.com/def/servlet/SC.web?c=rs.v
http://www.stockta.com/cgi-bin/anal...S.C&num1=1&cobr and=&mode=stock

[mrgreen]

its too bad noone here is looking at this play, i think it is going to have a wonderful 2005 imho, oh well.

[mrgreen]

+ rs [rssyf] resin systems is a stock you must to do your dd on,i see it giving a good % return over the next year, resin systems rssyf and rs.v has the only voc free [styrene/pollution free] resin in the world and is patented,i also like this company because the resin product is the main ingredient used in making plastic or fibreglass products, this is called the composite industry and in north america alone is a 20 billion dollar industry,rs.v and rssyf otc:bb are the symbols, resin ststems has the only voc free patented resin in the world [this means no pollution or styrenes when making any plastic or fibreglass products and resin is the key ingredient in these products] profit margins will be high off of the get go, this product is used in the $20 billion annual pultrusion and composites industry, management is focused and down to earth and has the proper players onboard to get the job done, product is huge, the money is in the bank , check it out do the dd thing,but take a serious look at this investment as there are lots of eyes watching it because of this revolutionary product . Here is some interesting links and headlines with great info out there on rs: http://www.howardgroupinc.com/clients/rsi/rsi.htm
http://www.resinsystemsinc.com/acc6173/index.html
http://www.nvshockey.com/
http://www.capitalideas.com/
http://www.goldencapital.com/
http://www.stockhouse.ca/comp_info.asp?symbol=RS&table=list
http://stockcharts.com/def/servlet/SC.web?c=rs.v
http://www.howardgroupinc.com/clients/rsi/research/fundamental_research_ feb04.pdf
++rs makes hockey sticks , power poles [big $ coming on this product] and many other neat products with their patented resin as well as selling the raw resin itself.
+++headlines:- Resin Systems Signs Long-term Composite Pole Distribution Agreement
2/17/04
-Resin products to be distributed by Hesco Electric
- EDMONTON, ALBERTA, Mar 25, 2004 (CCNMatthews via COMTEX) --
Resin Systems Inc. (RSI) (RS-TSX Venture / RSSYF - OTCBB) and its operating division, RS Technologies (RS) today announced that its Ontario market distributor Harwell Hesco Electric Supply Company Ltd.('Hesco') has provided RS with an initial order in edw
xcess of $6 million of composite utility poles and cross-arms.
++++t/a for resin systems:
http://www.americanbulls.com/StockPage.asp?CompanyTicker=RS&MarketTi cker=VSE&Typ=S
http://stockcharts.com/def/servlet/SC.web?c=rs.v
http://www.stockta.com/cgi-bin/analysis.pl?symb=RS.C&num1=1&cobr and=&mode=stock

[Dimension]

why is some guy/gal named suttie pumping and spamming this site all over like it was crack to and addict?

[resin]

anyone check this hotty out yet, worth a look!!!!!!!!!!!!
some links to do your dd on this one,take a look this company is exploding in stock price and revenues rssyf , rs.v in canada [resin systems]:
resin systems has the only voc free resin in the world this means no pollution is created when making plastic or fibreglass products, resin systems makes its own products like power poles and hockey sticks with many new products coming soon and they sell their resin direct as well. They are going for an amex listing which looks like will soon happen heres some info for those interested in what looks to be a great investment imho:

http://www.howardgroupinc.com/clients/rsi/research/040427_spelman.pdf
http://www.howardgroupinc.com/clients/rsi/research/fundamental_research_feb04.pdf
http://www.resinsystemsinc.com/acc6173/
http://www.howardgroupinc.com/clients/rsi/rsi.htm
http://www.capitalideas.com/
http://stockcharts.com/def/servlet/SC.web?c=rs.v
http://www.goldencapital.com/
http://www.nvshockey.com/

[resin]

analyst report out of new york giving rs close to a $3 canadian target , 2.16 u.s. for rssyf!!!!!!!!!!
http://www.howardgroupinc.com/clients/rsi/research/040427_spelman.pdf

info on analyst:

We are pleased to attach the Independent Investment Research Report by Spelman Research Associates Ltd dated April 27, 2004. The author is a senior research analyst with the firm and is highly regarded within the industry having received numerous awards for excellence. As a young company it is very difficult to obtain exposure to the institutional investment community without unbiased independent research coverage. Since Wall Street can no longer pay for research through investment banking you are probably going to see a significant reduction in companies having analyst coverage. Which leads to the question, “How do you get institutional investors evaluating a young company without any research coverage?”

Resin Systems paid $19,000 to Spelman Research to publish at least 4 quarterly independent research reports over the course of one year. We have absolutely no influence on the content of the report. The analysis is done by Spelman according to accepted valuation principles and the company is not informed of the contents of the report prior to publication.


I am pleased to see they recognize the company’s present merit and future growth potential. We believe we will outperform their projections considerably and as a result the markets will respond accordingly. In summary, it is important to obtain such independent coverage especially in our quest to broaden our corporate exposure in order to become an investment alternative within the Canadian, American and European financial communities. The Board and Management of Resin Systems will continue to work diligently in creating value for the shareholders of this company.


Yours truly

Greg Pendura

President and CEO

[resin]

check out resin systems breakout!!!!!!!!!rs in canada rssyf in u.s. amex listing coming soon imho:
http://stockcharts.com/def/servlet/SC.web?c=rs.v

[resin]

check out this chart:
rssyf in the u.s. and rs in canada [resin systems]
http://stockcharts.com/def/servlet/SC.web?c=rs.v

[resin]

Looks like rs is gonna have a great year, rssyf in the u.s for those interested resin systems has the only voc free resin in the world this means no pollution is created when making plastic or fibreglass products, resin systems makes its own products like power poles and hockey sticks with many new products coming soon and they sell their resin direct as well. They are going for an amex listing which looks like will soon happen heres some info for those interested in what looks to be a great investment imho:
http://www.howardgroupinc.com/clients/rsi/research/fundamental_research_feb04.pdf
http://www.resinsystemsinc.com/acc6173/
http://www.howardgroupinc.com/clients/rsi/rsi.htm
http://www.capitalideas.com/
http://stockcharts.com/def/servlet/SC.web?c=rs.v
http://www.goldencapital.com/

[resin]

Looks like rs is gonna have a great year, rssyf in the u.s for those interested resin systems has the only voc free resin in the world this means no pollution is created when making plastic or fibreglass products, resin systems makes its own products like power poles and hockey sticks with many new products coming soon and they sell their resin direct as well. They are going for an amex listing which looks like will soon happen heres some info for those interested in what looks to be a great investment imho:
Detailed Quote - Resin Systems Inc. - http://www.resinsystemsinc.com
Sym-X Bid - Ask Last Chg % Vol $Vol #Trade Open-Hi-Lo Year Hi-Lo Last Trade News Delay
RS - V 6.9 1.30 · 1.35 3.0 1.30 +0.15 13.0 259.0 316 73 1.16 1.30 1.16 1.25 0.71 Apr 20 12:09 Mar 25 realtime
http://www.howardgroupinc.com/clients/rsi/research/fundamental_research_feb04.pdf
http://www.resinsystemsinc.com/acc6173/
http://www.howardgroupinc.com/clients/rsi/rsi.htm
http://www.capitalideas.com/
http://stockcharts.com/def/servlet/SC.web?c=rs.v
http://www.goldencapital.com/
Detailed Quote - RESIN SYSTEMS - http://www.resinsystemsinc.com
Sym-X Bid - Ask Last Chg % Vol $Vol #Trade Open-Hi-Lo Year Hi-Lo Last Trade News Delay
RSSYF - Q 2.5 0.93 · 0.96 2.5 0.96 +0.08 9.1 24.5 22 9 0.88 0.96 0.88 0.95 0.51 Apr 20 12:00 Mar 25 realtime

[resin]

Resin Systems Announces Utility Pole Order
3/25/04

EDMONTON, ALBERTA, Mar 25, 2004 (CCNMatthews via COMTEX) --
Resin Systems Inc. (RSI) (RS-TSX Venture / RSSYF - OTCBB) and its operating division, RS Technologies (RS) today announced that its Ontario market distributor Harwell Hesco Electric Supply Company Ltd.('Hesco') has provided RS with an initial order in edw
xcess of $6 million of composite utility poles and cross-arms.

Delivery of this initial order will be completed in 2005. First deliveries will start at the end of the second quarter. Further financial terms will not be disclosed for competitive reasons. The order will contribute to the Company's growing production order backlog. Also, in the opinion of RS management, this order will be a catalyst for rapidly opening opportunities with utility companies in the Ontario market.

Hesco www.harwellhesco.com is headquartered in Toronto, Ontario. Hesco is a full line stocking electrical distributor, which has been supplying its Industrial, Utilities, Institutional, Original Equipment Manufacturers and Contractor customers since 1957. As an ISO registered company it has stocking branches in Toronto, Barrie, Markham, Hamilton, Burlington and St. Catharines. The company services over 2,000 customers throughout Southern Ontario.

RSI is a chemical technology company that is actively engaged in the commercialization and further development of its proprietary line of unique, polyurethane based, composite resin systems under the Version brand name. RSI's common shares are listed on the TSX Venture Exchange under the trading symbol 'RS'and on the OTCBB under the trading symbol 'RSSYF'.

This news release contains 'forward-looking statements'within the meaning of the United States federal securities laws. Reliance should not be placed on forward-looking statements because they involve known and unknown risks, uncertainties and other factors, which may cause the actual results to differ materially from the anticipated future results expressed or implied by such forward-looking statements. Resin Systems Inc. undertakes no obligation to publicly update or revise any forward-looking statement contained in this news release except as required by law.

Greg PenduraPresident &CEOResin Systems Inc.(780) [e-mail] HowardThe Howard Group Inc(888) 221-0915grant@ howardgroupinc.comwww.howardgroupinc.comorJohn Robinson or Robert KennedyCurrent Capital Corp.[phone] or [e-mail] or [e-mail]
NEWS RELEASE TRANSMITTED BY CCNMatthews The TSX Venture Exchange has not reviewed and does not accept responsibility for the adequacy or accuracy of this news release.

Copyright (C) 2004, CCNMatthews. All rights reserved.

[resin]

Resin products to be distributed by Hesco Electric

2004-03-19 06:07 ET - News Release

Mr. Greg Pendura reports

RESIN SYSTEMS SIGNS LONG-TERM COMPOSITE UTILITIES DISTRIBUTION AGREEMENT

Resin Systems and its operating division, RS Technologies (RS), have signed a long-term comprehensive definitive distribution agreement with Harwell Hesco Electric Supply Company Ltd. The existing agreement between the companies provided for the establishment of this definitive long-term distribution agreement. The agreement provides for the distribution of the power, lighting and communications utility products being produced by Resin Systems using the company's patented "Version" resin systems. The initial region covered by this agreement is the province of Ontario. The agreement contains sales performance criteria and growth objectives, which are aligned with Resin Systems' overall sales targets. In addition, the agreement includes the first licensing agreement option awarded by Resin Systems for the production of its patented utility product technologies.

Hesco www.harwellhesco.com is headquartered in Toronto, Ont. Hesco is a full-line stocking electrical distributor, which has been supplying its industrial, utilities, institutional, original equipment manufacturers and contractor customers since 1957. As an ISO-registered company, it has stocking branches in Toronto, Barrie, Markham, Hamilton, Burlington and St. Catharines. The company services over 2,000 customers throughout Southern Ontario.

[resin]

rs.v and rssyf otc:bb are the symbols, resin ststems has the only voc free patented resin in the world [this means no pollution or styrenes when making any plastic or fibreglass products and resin is the key ingredient in these products] profit margins will be high off of the get go, this product is used in the $20 billion annual pultrusion and composites industry, management is focused and down to earth and has the proper players onboard to get the job done, product is huge, the money is in the bank , check it out do the dd thing,but take a serious look at this investment as there are lots of eyes watching it because of this revolutionary product . Here is some interesting links and headlines with great info out there on rs:
http://www.howardgroupinc.com/clients/rsi/research/fundamental_research_feb04.pdf
http://www.howardgroupinc.com/clients/rsi/rsi.htm
http://www.capitalideas.com/
http://www.nvshockey.com/
http://stockcharts.com/def/servlet/SC.web?c=rs.v
http://www.resinsystemsinc.com/acc6173/
http://www.goldencapital.com/
http://www.stockhouse.ca/news/news.asp?newsid=2178612&tick=RS

[resin]

looking good.

[resin]

Major contract announcement on rs RESIN SYSTEMS on the venture
This company has the only voc free or pollutant free resin in the world and resin is used in the composite/pultrusion industries which is anything fibreglass or plastic made these are 30 billion $$$ annual industries this stock is gonna be a huge growth story on the markets this year$$$$$
http://www.howardgroupinc.com/clients/rsi/rsi.htm
http://www.howardgroupinc.com/clients/rsi/research/fundamental_research_feb04.pdf

$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
Edmonton, Alberta, March 2, 2004: Resin Systems Inc. (RSI) (RS–TSX Venture / RSSYF – OTCBB) and its operating division, RS Technologies (RS) today announced that its Prairie Region distributor EECOL Electric Ltd. (“EECOL”) has provided RS with an initial order in excess of $3 million of composite utility poles and cross-arms.
EECOL will take delivery of this initial order over the next 12 months. First deliveries will start at the end of the second quarter. Further financial terms will not be disclosed for competitive reasons. The order will contribute to RS’s growing production order backlog. Also, in the opinion of RS management, this order will be a catalyst for rapidly opening opportunities with utility companies in the Prairie Region.


EECOL www.eecol.com, which is headquartered in Calgary, Alberta, has a global presence with 63 branches located in the Americas (north & south) with a specific focus on Western Canada. The total direct staff includes in excess of 700 employees, making it one of Canada’s largest distribution companies in its sector.


EECOL provides the electrical material supply requirements of industry (utilities), contractors, E.P.C.'s and institutional customers with large and complete inventories (now including composite poles and cross arms), technically qualified personnel and prompt and efficient service.


EECOL is a member of IED Limited Partnership, a National Procurement and Marketing Association of Independent Electrical Distributors.


For further information contact:


www.resinsystemsinc.com

[resin]

check out rssyf guys, it is rs in canada its my fav.:
http://www.howardgroupinc.com/clients/rsi/research/fundamental_research_feb04.pdf
http://www.resinsystemsinc.com/acc6173/
http://www.howardgroupinc.com/clients/rsi/rsi.htm
http://www.capitalideas.com/
http://stockcharts.com/def/servlet/SC.web?c=rs.v
http://www.goldencapital.com/

[resin]

serious uptrend ready to break out!!!!!!!!
http://stockcharts.com/gallery?RS.V